Interlogix VR1100-R3, VR1100 Specsheet

GE

VR1100 Series

Security

Overview

The IFS VR1100 series video receiver detects an AM video
signal on one multimode fiber optic cable. The receiver
utilizes automatic gain control (AGC) and is compatible
with the IFS VT1101M, VT1101M-AC, and VT1001 series
transmitters. Plug-and-play design ensures ease of
installation requiring no electrical or optical adjustments.
The receiver incorporates power and AGC status
indicating LED’s for monitoring proper system operation.
The module is available in either stand-alone or rack
mount version.

Application Examples

• CCTV (Fixed Video)

IFS AM Video Receiver

with Automatic Gain Control (AGC)

Standard Features

• AM Video

• NTSC, PAL, SECAM Compatible

• Full Color Compatibility

• Full Range Automatic Gain Control (AGC)

• No In-field Electrical or Optical Adjustments Required

• Power and AGC Status Indicating LED’s to Monitor
System Performance

• Hot-Swappable Rack Modules

• Automatic Resettable Fuses on all Power Lines

• Comprehensive Lifetime Warranty

AM Video Receiver
with AGC

Detects an AM video signal on one
multimode fiber optic cable.

VT1101M

Video

(Coax)

Video

(Coax)

VR1100

ifs

ifs

International

Fiber

Systems

Incorporated

203.426.1180

1 Fiber

62.5/125µm MM

up to 2.5 miles

(4 km)

Specifications

Video

Video Output: 1 volt pk-pk (AGC controlled)
Bandwidth: 5 Hz - 10 MHz (At 6 dB Attenuation)
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >55 dB at 10 dB Attn.
>60 dB at 7 dB Attn.

Wavelength 850 nm, Multimode

Receiver Sensitivity 1 µw (-30 dBm)

Transmitter Output 25 µw (-16 dBm)

Number Of Fibers 1

Connectors

Optical: ST
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)

Electrical & Mechanical

Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Max. RG59 Cable Length: 750 ft.
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C

Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.

System Design

Ordering Information

Multimode

62.5/125µm**

Part Number Optical Pwr. Budget Max. Distance*

VR1100

Description

AGC Video Receiver (850 nm)

VR1100 Series is compatible with:
VT1101M, VT1101-AC, AND VT1001
Series Transmitters

Accessories♦

Options

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

♦

All accessories are third party manufactured.

PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)

Fibers Required

1 2.5 miles (4 km)

14 dB