Page 1
GE
VR1100-CC Series
Security
Overview
The IFS VR1100-CC series video receiver supports a simultaneous AM video signal with contact closure over one
multimode fiber optic cable. The receiver utilizes automatic
gain control (AGC) and is compatible with the IFS VT1101MAC, VT1001 and VT1101M transmitters. Plug-and-play
design ensures ease of installation requiring no electrical or
optical adjustments. The receiver incorporates power and
AGC status indicating LED’s for monitoring proper system
operation. The module is available in either stand-alone or
rack mount version.
Application Examples
• CCTV (Fixed Video)
IFS AM Video Receiver with AGC
and Contact Closure
Standard Features
• AM Video
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility
• Full Range Automatic Gain Control (AGC)
• Hot-Swappable Rack Modules
• No In-field Electrical or Optical Adjustments Required
• Power and AGC Status Indicating LED’s to Monitor
System Performance
• Automatic Resettable Fuses on all Power Lines
• Comprehensive Lifetime Warranty
AM Video Receiver
with AGC and
Contact Closure
Detects an AM video signal on one
multimode fiber optic cable.
Page 2
VT1101M
Video
(Coax)
1 Fiber
62.5/125µ m MM
mounted to back
of camera
VR1100CC
up to 2.5 miles
(4 km)
ifs
ifs
International
Fiber
Systems
Incorporated
203.426.1180
Contact
Closure
Contact
Closure
Specifications
Video
Video Output: 1 volt pk-pk (AGC controlled)
Bandwidth: 5 Hz - 10 MHz (At 6 dB Attenuation)
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): >55 dB at 10 dB Attn.
Contact Closures
Solid State Relay: 24 VAC/VDC @ 170 mA
Wavelength 850 nm, Multimode
Number Of Fibers 1
Connectors
Optical: ST
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
ElectricaL & Mechanical
Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
System Design
Ordering Information
Multimode
Part Number Optical Pwr. Budget Max. Distance*
VR1100-CC
Description
AGC Video/Contact Receiver (850 nm)
62.5/125µm**
VR1100-CC is compatible with:
VT1101M, VT1101-AC, AND VT1001
Series Transmitters
Accessories♦
Options
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦
All accessories are third party manufactured.
Fibers Required
1 2.5 miles (4 km)
4 dB
Loading...