Interlogix VR1001-R3, VR1001 Specsheet

GE

VR1001

Security

Overview

The IFS VR1001 dual video receiver detects two
independent AM video signals in one module on two
independent multimode fiber optic cables. The module
is not a multiplexer. The module is ideal for smaller CCTV
installations and the rack-mount version can be used to
double the fixed video capacity of the R3 rack for up to
28 independent video channels per card cage. The
modules utilize manual gain control. The receiver is
compatible with the IFS VT1101M, VT1101M-AC, and VT1001
series transmitters. Plug-and-play design ensures ease
of installation. The module incorporates power and sync
detect status indicating LED’s for monitoring proper system
operation. The module is available in either stand-alone or
rack mount version.

Application Examples

• CCTV (Fixed Video)

IFS Dual Independent

AM Video Receiver

Standard Features

• AM Video

• NTSC, PAL, SECAM Compatible

• Full Color Compatibility

• Two Independent Receivers in One Module

• Can be Used to Double the Fixed Video Capacity of an R3
Card Cage

• Plug and Play Design for Ease of Installation

• Power and Sync Detect Status Indicating LED’s to Monitor
System Performance

• Hot-Swappable Rack Modules

• Automatic Resettable Fuses on all Power Lines

• Comprehensive Lifetime Warranty

Dual Independent
AM Video Receiver

Detects two independent AM video
signals in one module on two
multimode optical fibers.

if

s

up to 2.5 miles

(4 km)

1 Fiber

62.5/125µm MM

1 Fiber

62.5/125µm MM

2 Video Inputs

2 Video Outputs

VR1001-R3

VT1101M

ifs

VT1101M

ifs

Specifications

Video

Video Output: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB typical, 54 dB minimum

Wavelength 850 nm, Multimode

Receiver Sensitivity 1 µw (-30 dBm)

Transmitter Output 25 µw (-16 dBm)

Number Of Fibers 2

Connectors

Optical: ST
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)

ElectricaL & Mechanical

Power:
Surface Mount: 24 VAC C.T. @ 300 mA
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.

System Design

Ordering Information

Multimode

Part Number Optical Pwr. Budget Max. Distance*

VR1001

Description

Dual Video Receiver (850 nm)

62.5/125µm**

VR1001 is compatible with:
VT1101M, VT1101-AC, AND VT1001
Series Transmitters

Accessories♦

Options

PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

♦

All accessories are third party manufactured.

Fibers Required

2

14 dB

2.5 miles (4 km)