Page 1
GE
VR1000
Security
Overview
The IFS VR1000 video receiver detects an AM video signal
on one multimode optical fiber. The VR1000 utilizes manual gain control. The receiver is compatible with the IFS
VT1101M, VT1101M-AC, and VT1001 series transmitters.
Plug-and-play design ensures ease of installation. The
receiver incorporates a power status indicating LED for
monitoring proper system operation. The module is
available in a stand-alone version only.
Application Examples
• CCTV (Fixed Video)
IFS AM Video Receiver
Standard Features
• AM Video
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility
• Utilizes Manual Gain
• Plug and Play Design for Ease of Installation
• Power Status Indicating LED to Monitor
System Performance
• Automatic Resettable Fuses on all Power Lines
• Comprehensive Lifetime Warranty
AM Video Receiver
Detects an AM video signal on one
multimode optical fiber.
Page 2
Specifications
VT1101M
Video
(Coax)
Video
(Coax)
VR1000
ifs
ifs
International
Fiber
Systems
Incorporated
203.426.1180
up to 2.5 miles
(4 km)
1 Fiber
62.5/125µm MM
Video
Video Output: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB typical, 54 dB minimum
Wavelength 850 nm, Multimode
Receiver Sensitivity 1 µw (-30 dBm)
Transmitter Output 25 µw (-16 dBm)
Number Of Fibers 1
Connectors
Optical: ST
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power: 10-12 VDC @ 150 mA
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 3.5 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
System Design
Ordering Information
Description
Video Receiver (850 nm)
Multimode
Part Number
VR1000
62.5/125µm**
VR1000 is compatible with:
VT1101M, VT1101-AC, AND VT1001
Series Transmitters
Accessories♦
Options
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦
All accessories are third party manufactured.
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Fibers Required
1 2.5 miles (4 km)
Optical Pwr. Budget
14 dB
Max. Distance*
Loading...