Interlogix VE736, VE735 Specsheet

Aritech Series / PIR motion sensor
VE735
Combined volumetric and long range sensor
Volumetric motion sensor
EV1000 Series
Overview
The VE735 uses Interlogix’s unique patented PYRO and V²E technology. With existing technology PIR detectors, IR signals are captured by a pyro-electric sensor placed in the detector’s focal point . When a conventional pyro sees a thermal source within the surveillance area, it will generate a one-dimensional signal (value) and the presence of the source can be detected. The detection probability within the area is determined only by the resolution of the optics of the motion detector. However due to the unique construction of the VE735 patented pyro, a thermal source will generate a multi-dimensional signal (vector), allowing the pyro to determine not only the presence but also the direction of motion of a thermal source. This now means that the detection probability is equal to the product of the resolution of the optics and the multi-dimensional output of the pyro. This is a major advance in PIR technology capability.
The VE735 utilises unique DSP algorithm. The vector output of the VE735 pyro is unique for each different signal source. The DSP detection analysis allows the system to distinguish each vector’s shape and characteristic. In other words, each vector’s unique signature/pattern. In the surveillance area the VE735 will not only identify non-thermal signal sources, but, thanks to the DSP-driven detection algorithm, it will also lter out any false alarm signals from a stationary thermal source and react only to alarm signals from a moving thermal source (intruder). This is the rst time that a PIR motion sensor with vector pattern recognition has been available on the security market
Features
• 20m volumetric + 60m long range
• Patented PYRO electric sensor
• DSP driven detection algorithm
• High density mirror optics
• Absolute volumetric sensor
• Left to right or right to left detection mode
• 3 alarm sensitivities
• Self test with trouble output relay and LED
• Event memory
• Plug-in electronics
• Easy to install with laser beam alignment tool
• Pry-off and cover tamper
• Submitted for all major European security approvals
The VE735 has a unique feature in the Step & Glide focus mirror. With the “High Density Optic” (HDO) mirror, the VE735 series will provide you with more and wider curtains (and therefore untraceable detection gaps), without increasing the mirror size. The VE735 series has a comprehensive oor­pattern, made by a wide-angle mirror featuring 11 high-density curtains over a 90° eld-of-view, enhanced with a 60m long­range curtain. The VE735 is the only motion detector on the market that can offer this unique combination in one product
.
www.interlogix.com.au
Interlogix
National Sales Enquiries 1300 361 479
VE735
271-273 Wellington Road Mulgrave Vic 3170 T +61 3 9239 1200 F +61 3 9239 1298
Combined volumetric and long range sensor
Chime Mode - Powerful New Feature
The pattern of the output vector of the VE735 pyro contains unique information about the origin of the source. That’s why the DSP in the VE735 can recognise the direction in which the thermal source is moving. The VE735 allows you to determine the direction of the intruder across the surveillance area. When the chime mode is ON, the VE735 can trigger an alarm when an intruder walks from left-to-right and differentiate intruder movement from right-to-left, and vice versa. The sensitivity settings (Low, Standard and High) ensure the best performance for most applications. The sensitivity level can be easily modied with a jumper.
Remote self test
All active and electronics components of the VE735 are monitored constantly in order to report the unlikely event of a defect.
Plug-in & accessories
The plug-in concept ensures easy installation without any worry about damaging the sensor so all setting can be done conve­niently in your hand. The VE710 laser alignment tool is the recommended tool to use during installation for aligning the sensors in long corridor applications.
Specications
Input power 9 to15 VDC (12 Vnominal)
Peak-to-peak ripple 2 V (at 12 VDC)
Normal current consumption 11 mA
Alarm current consumption: 9 mA
Maximum current consumption: 15 mA
Mounting height Min. 1.8m max 3.0 m
Target speed range 20 cm/sec to 3 m/sec
Alarm output 80 mA at 30 VDC max.
Tamper output 100 mA at 30 VDC max.
Trouble output 80 mA at 30 VDC max.
Alarm time 3 sec
Detector start-up time 50 sec
Operating temperature -10 °C to +55 °C
Relative humidity Max. 95%
Dimensions (H x W x D) 175 x 93 x 66 mm
Weight 275 g
Number of curtains 11 at 20 m + 1 at 60 m
Viewing angle 86° at 20 m + 3° at 60 m
IP/IK rating IP30 / IK02
Ordering Information
VE735 PIR Detector with 11 curtains & 1 curtain of 20 m & 60 m NC Relay VE736 PIR Detector with 11 curtains & 1 curtain of 20 m & 60 m CO Relay
VE710 Laser beam, long-range alignment tool for VE700 family SB01 Wall/ceiling mount bracket (± 45º horizontal, 0º or -5º vertical)
Specications subject to change without notice.
Interlogix
(a division of UTC Fire & Security Australia Pty Ltd) ABN 84 086 771 404 © All Rights Reserved
VE735-DS -120 514 -3
Loading...