Interlogix VDT1505WDM-R3, VDT1505WDM Specsheet

VDT/VDR1505WDM Series

IFS Digitally Encoded Video with

One-Way “Up-the-Coax” Data

Overview

The IFS VDT/VDR1505 series video and data transmission system is designed for full compatibility with “Up-the-Coax” video/data systems from major manufacturers such as Panasonic Proteus™, Pelco Coaxitron™, Bosch Bi-Linx™, and others. The module supports simultaneous broadcast quality transmission of 10-bit digitally encoded video and “up the coax” data over one multimode or single mode fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The VDT/VDR1505 series features an optional contact closure input that allows an additional device such as a dome tamper switch or alarm input to be added and its signal transmitted back to the monitoring location. This feature eliminates the need for installing additional wiring to support the alarm contact closure. The modules incorporate power, video and data status indicating LED’s to monitor proper system operation. The modules are available in either stand-alone or rack mount versions.

Application Examples

• Panasonic Proteus

• Pelco Coaxitron

• Bosch Bi-Linx™ (Add ‘-B’ for Bosch Bi-Linx™ Compatibility)

™

Standard Features

• Transmission of Video and “Up-the-Coax” One-Way Data

• 10-Bit Digitally Encoded Video Transmission

• Exceeds RS-250C Short-Haul Transmission

• Optional Bi-Directional Contact Closure

• NTSC, PAL, SECAM Compatible

• Full Color Compatibility

• No In-field Electrical or Optical Adjustments Required

• Power, Video and PTZ Data Status Indicating LED’s to Monitor System Performance

• Integrated WDM for Greater Product Reliability

• Hot-Swappable Rack Modules

• Automatic Resettable Fuses on all Power Lines

• Distances up to 30 miles (50 km)

• Comprehensive Lifetime Warranty

Digitally Encoded Video with One-Way “Up-the-Coax” Data

Video and data transmission designed for full-compatibility with “Up-the-Coax” systems from major manufacturers.

Specifications

Monitor

Video & Control

Bosch,

Panasonic,

or Pelco Camera

VDT1535WDM VDR1535WDM

1 Fiber

9/125µm SM

up to 15 miles

(25 km)

ifs

International

Fiber

Systems

Incorporated

203.426.1180

ifs

International

Fiber

Systems

Incorporated

203.426.1180

Video

Video Input/Output: 1 volt pk-pk (75 ohms) Bandwidth: 5 Hz - 10.0 MHz Differential Gain: <1% Differential Phase: <0.7° Tilt: <1% Signal-to-Noise Ratio (SNR): >67 dB @ Maximum Optical Loss Budget

Data

Data Interface: Pelco Coaxitron™, Panasonic Proteus™, Bosch Bi-Linx™

Wavelength 1310/1550 nm, Multimode or Single Mode

Number of fibers 1

Connectors

Optical: ST Power and Data: Terminal Block with Screw Clamps Video and Sync: BNC (Gold Plated Center-Pin)

Electrical & Mechanical

Power: Surface Mount: VDT: 24 VAC C.T. @ 250 mA VDR: 12 VDC @ 250 mA Number of Rack Slots: 1 Current Protection: Automatic Resettable Solid-State Current Limiters Circuit Board: Meets IPC Standard Size (in./cm.) (LxWxH) Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours Operating Temp: -40° C to +74° C Storage Temp: -40° C to +85° C Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.

Note: Coaxitron is a registered trademark of PELCO Viacoax of Vicon Industries, Inc. Proteus is a registered trademark of Panasonic, Inc.

System Design

Ordering Information

Description

Video Transmitter/Data Receiver (1310/1550 nm) Video Receiver/Data Transmitter (1550/1310 nm)

Video Transmitter/Data Receiver (1310/1550 nm) Video Receiver/Data Transmitter (1550/1310 nm) Video Transmitter/Data Receiver (1310/1550 nm)

Multimode

62.5/125µm**

Single Mode 9/125µm

Accessories

Part Number

VDT1505WDM VDR1505WDM

VDT1535WDM VDR1535WDM VDT1535WDM-HP

◆

PS-12VDC 12 Volt DC Plug-in Power Supply (Included) PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Options

Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately) Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory) Add ‘-B’ for Bosch Bi-Linx™ Compatibility

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ◆All accessories are third party manufactured.

Fibers Required

Optical Pwr. Budget

15 dB

18 dB

Max. Distance*

3.0 miles (5 km)

15 miles (25 km)

30 miles (50 km)