Interlogix VAT14120, VAT14130-R3, VAT14130, VAR14120 Specsheet

System Design

Optical Pwr. Budget

Max. Distance*

2 miles (3 km)

37 miles (60 km)

48 miles (78 km)

Fibers Required

20 dB

26 dB

Line / Fiber Transmission

IFS

VAT/ VAR14100 Series

IFS 10-Bit Digital Video with Stereo Audio

OVERVIEW

he IFS VAT/VAR14100 Series video and audio transmitter/receiver

supports simultaneous broadcast quality transmission of 10-bit digitally encoded video and 20-bit digitally encoded stereo audio over one multimode or single mode optical ﬁber and exceeds the requirements of EIA RS-250C for Short-Haul video transmission. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each module incorporates status indicating LED’s for monitoring of proper system operation. The modules are available in either stand-alone or rack mount versions.

APPLICATION EX AMPLES

• Broadcast Engineering Facilities

• Professional Audio/Visual Installations

SYSTEM DESIGN

STANDARD FEATURES

• 10-Bit Digitally Encoded Video Transmission

• Exceeds RS-250C Short-Haul Transmission

• NTSC, PAL, SECAM Compatible

• Distances up to 48 Miles (78 km)

• 20-Bit Digitally Encoded Stereo Audio

• 600 Ohm Impedance Line-Level Audio

• No In-ﬁeld Electrical or Optical Adjustments Required

• LED Status Indicators For Monitoring All Critical Operating Parameters

• Hot-Swappable Rack Modules

• Automatic Resettable Fuses on all Power Lines

• Full Color Compatibility

• Comprehensive Lifetime Warranty

Video

(Coax)

Audio Line Level

up to 37 miles

VAT14130 VAR14130-R3

International

Fiber

Systems

ifs

Incorporated

203.426.1180

(60 km)

1 Fiber

9/125μm SM

ifs

Video

(Coax)

Audio Line Level

interlogix.com

Specifications

Data

Data Interface: RS-232 (data lines only), or RS-422 (see note) Data Rate: DC - 1.5 Mbps (NRZ) Operating Mode: Asynchronous Simplex or Full-Duplex Bit Error Rate: <1 in 10˚

Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM

D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM D1030WDMB: 1550 nm, SM

Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2

D1030: 2 D1030WDMA: 1 D1030WDMB: 1

Connectors

Optical: ST Data and Power: Terminal Block with Screw Clamps

Electrical & Mechanical

Power: Surface Mount: 12 VDC @ 150 mA Rack: From Rack Number of Rack Slots: 1 Current Protection: Automatic Resettable Solid-State Current Limiters Circuit Board: Meets IPC Standard Size (in./cm.) (LxWxH) Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours Operating Temp: -40° C to +74° C Storage Temp: -40° C to +85° C Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.

Security

North America T 888-GE-SECURITY 888-437-3287 F 503-691-7566 E sales@ifs.com

Asia T 852-2907-8108 F 852-2142-5063

Australia and New Zealand T 613-9239-1200 F 613-9239-1299

Europe T 44-113-238-1668 F 44-113-253-8121

Latin America T 305-593-4301 F 305-593-4300

gesecurity.com/ifs

Specifications subject to change without notice

VAT/VAR1410 0 Series

IFS 10-Bit Digital Video with Stereo Audio

Ordering Information

Multimode 62.5/125µm** VAT14120 Video Stereo Audio Transmitter (1310 nm) 1 20 dB 2 miles (3 km)

Single Mode 9/125µm VAT14130 Video Stereo Audio Transmitter (1310 nm) 1 20 dB 37 miles (60 km)

Accessories ♦

Options Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)

*Optical transmission distance is limited to optical loss of the ﬁber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by ﬁber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

♦ All accessories are third party manufactured.

Speciﬁcations

Video

Video Output: 1 volt pk-pk

Bandwidth: 5 Hz - 10 MHz

Differential Gain: <2%

Differential Phase: <0.7°

Tilt: <1%

Signal-to-Noise Ratio (SNR): >67 dB

Audio

No. of Bits: 20

Sampling Rate: 52.3 KHz

Bandwidth: 20 Hz to 18 KHz@ -1 dB

Max. Input/Output Level: 0 dBm across 600 ohms

Signal-to-Noise Ratio (SNR) 87 dB, Min.

Total Harmonic Distortion: 0.01%

Channel Crosstalk: -100 dB @ 1 KHz

Input/Output: Balanced or Unbalanced, 600 ohms

Wavelength

Number Of Fibers

Connectors

Optical: ST

Power and Audio: Terminal Block with Screw Clamps

Video: BNC (Gold Plated Center-Pin)

Electrical & Mechanical

Power:

Surface Mount: 12 VDC @ 500 mA

Rack: From Rack

Number of Rack Slots: 2

Current Protection: Automatic Resettable Solid-State Current Limiters

Circuit Board: Meets IPC Standard

Size (in./cm.) (LxWxH)

Surface Mount: 7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm

Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm

Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours

Operating Temp: -40° C to +74° C

Storage Temp: -40° C to +85° C

Relative Humidity: 0% to 95% (non-condensing)

North America

T 855-286-8889

Part Number Description Fibers Required Optical Pwr. Budget Max. Distance*

VAR14120 Video Stereo Audio Receiver (1310 nm) 1 20 dB 2 miles (3 km)

VAR14130 Video Stereo Audio Receiver (1310 nm) 1 20 dB 37 miles (60 km)

PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)

Latin America

T 561-998-6114

1310 nm, Multimode or Single Mode

Interlogix is part of UTC Building & Industrial Systems,

Code of Federal Regulations, Subchapter J

Speciﬁcations subject to change without notice.

a unit of United Technologies Corporation.

Agency Compliance

Complies with FDA Performance

Standard for Laser Products, Title 21,

interlogix.com

VAT/ VAR 14100 Se ri es