UltraView UVD-6120VE-2
Digital WDR Dome
Camera User Manual
P/N 1072553A • REV 1.0 • ISS 18JUN12
Copyright
©
2012 UTC Fire & Security. All rights reserved.
Trademarks and
patents
The
UTC
Other trade names used in this document may be trademarks or
registered trademarks of the manufacturers or vendors of the
respective products.
Manufacturer
UTC Fire & Security Americas Corporation, Inc.
2955 Red Hill Avenue, Costa Mesa, CA 92626
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, The Netherlands
Certification
FCC compliance
Class A:
the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated i
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction m anual, m a y cause harm f ul
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
Notice!
product may cause
required to take adequate measures.
European Union
directives
12004/108/EC (EMC directive):
declares that this device is in compliance or with the essential
requirements and ot
2002/96/EC (WEEE directive):
cannot be disposed of as unsorted municip al was te in the Europ ean
Union. For proper recycling, return this product to your local supplier
upo
designated collection points. For more information see:
www.recyclethis.info.
Contact information
For contact information
www.utcfssecurityproducts.eu
TruVision and Interlogix names and logo are trademarks of
Fire & Security.
-5923, USA
N4131
This equipment has been tested and found to comply with
n a
ACMA compliance
This is a Class A product. In a domestic environment this
radio interference in which case the user may be
Hereby, UTC Fire & Security
her relevant provisions of Directive 2004/108/EC
Products marked with this symbol
n the purchase of equivalent new equipment, or dispose of it at
, see www.utcfireandsecurity.com or
.
Content
Product overview 2
Package Contents 2
Features 2
User guidelines 2
Product description 3
OSD control pad 3
Installation 5
Mount the camera 5
Connect the cables 5
Adjust the lens 5
Adjust the focus and zoom 6
Programming 7
Access the Main menu 7
General menu 7
AE/WDR/BLC menu 8
WB mode menu 9
D/N mode menu 9
Motion alarm menu 10
Privacy menu 11
Picture adjustment me nu 12
Reset camera 12
Specifications 12
Dimensions 13
Menu Map 14
UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual 1
Product overview
The UVD-6120VE-2-XX camera uses a digital signal processor (DSP) to process
video signals. The camera includes a microcontroller to provide high-quality
images with high-color reproduction and sharp pictures.
Package Contents
The package contains the fol l owing:
• Dome camera
• Monitor output cable
• Mounting screws, wall anchors, and hex wrench
• Power terminal
• Ceiling drilling holes template
Note: Use the video output BNC and power jack for normal system operation.
Use the monitor output cable for installation and maintenance.
Features
The camera includes the following features:
• EXview HAD II (hole accumulated diode) technology with 480,000 pixel s
NTSC (570,000 PAL)
• Use of LSI (large scale integration) digital processors to produce 650 lines of
horizontal resolution
• Smart digital control automatic BLC (backlight compensation)
• Digital wide dynamic range (WDR)
• Advanced auto exposure system for both fixed iris and auto iris lenses to
optimize the amount of light
• Internal synchronization
• Eight privacy mask areas to protect privacy concerns
• Advanced OSD (onscreen di spl ay) control
• Signal-to-noise ratio better than 52 dB
• Long life and high reliability
• Isolated switching power 12 VDC and 24 VAC
User guidelines
• Program the camera settings as much as possible before mounting the
camera. Take appropriate safety precautions while completing programming
after installation.
2 UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual
• Always use a 12 VDC or 24 VAC UL listed Class 2 power supply to power the
camera.
• Do not use the camera over the temperature range specifications: - 22 to
122°F (-30 to +50°C).
• If the light source where the camera is installed experiences rapid, widevariations in lighting, the camera may not operate as intended.
WARNING: To reduce the risk of fire or electronic shock, do not expose the
camera to rain or moisture and do not remove the cover or back.
Product description
Figure 1:: Camera description
Monitor output cable:
1. Monitor output BNC; 2.
Monitor output RCA
OSD control pad
Camera body
OSD control
pad
System heater
Power jack
Video monitor output Video output BNC
The onscreen display (OSD) control pad (Figure 3) is a five-direction pad that
provides the ability to manually control the camera functions. Table 1 below lists
the OSD control pad functions and describes their use.
UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual 3
Figure 2: OSD control pad
OSD control pad
Table 1: OSD control pad functions
Pad directions Description
Up Moves the cursor upward to select an item.
Left
Right
Moves the cursor left to select or adjust the options of the selected
item.
Moves the cursor to the right to select or adjust the options of the
selected item.
Down Moves the cursor downward to select an item.
Press the center of the control pad to display the Setup menu. If the
Enter
selected item has its own menu, press the control pad to enter a
submenu. Press the control pad for 2 seconds to save all settings
and exit the Setup menu.
4 UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual
Installation
Please check the package contents and make sure that the device in the
package is in good condition and all the assembly parts are included.
To install the camera you will need to prepare the mo unting surface, mount the
camera, make cable connections, adjust the lens and then secure the dome
cover securely.
Note: Before installing, please ensure that the mounting surface is strong enough
to withstand three times the weight of the camera. If the mounting surface is not
strong enough, the camera may fall and cause serious damage.
Mount the camera
Use the ceiling drilling holes template and mark the holes on the ceiling with a
pen. Attach the plate with fasteners to the ceiling and then attach the camera
body to the plate.
To mount the camera, attach the camera to the mounting surface using the
appropriate fastener s.
Connect the cables
To connect the cables:
1. Connect a coaxial cable from the camera’s BNC connector to a CCTV
monitor or video recording device.
2. Connect the 12 VDC or 24 VAC power supply to the power jack of the
camera.
Caution: Check for polarity when using a 12 VDC power supply.
Adjust the lens
The camera is mounted on a pan-tilt-twist (3-axis grimbal) rotating platform so
that it is easy to adjust the camera orientation. See Figure 3 on page 6.
UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual 5
Platform horizontal adjustment (0 to 180°)
Zoom ring thumbscrew
Figure 3: Camera adjustment
Platform vertical adjustment (0 to 90°)
Rotor horizontal adjustment (0 to 350°)
To adjust the lens:
See Figure 3 above.
1. To adjust the horizontal angle of the platform up to 180 degrees, turn the
platform.
2. To adjust the horizontal angle of the rotor up to 350 degrees, turn the rotor on
the platform.
3. To adjust the vertical angle of the platform up to 90 degrees, turn the
platform.
Adjust the focus and zoom
Figure 4: Zoom and focus adjustment
Focus ring thumbscrew
To adjust the camera zoom and focus:
1. Loosen the zoom ring thumbscrew and turn the zoom ring to set the desired
zoom. Tighten the thumbscrew.
2. Loosen the focus ring thumbscrew and turn the focus ring to set the desired
focus. Tighten the thumbscrew.
6 UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual
Programming
Access the Main menu
The Main menu provides access to the camera configuration options. The onscreen display (OSD) is only available in English.
Program the camera by attaching a standard video monitor to the system.
Figure 5: The Main menu
To access the menus:
1. Press the OSD control pad to acces s the Main menu and its submenus.
2. Push the pad up, down, lef t and right to move between menu options.
3. Press the OSD control pad (Enter) to select an option.
4. When in a sub menu, select Return to return to the previous menu.
5. To exit the Main menu, move the cursor to Exit at the bottom of the sc reen
and press Enter. All changes are saved.
General menu
Select the General option from the Main menu to enter the General menu.
Figure 6: The General menu
Table 2: General menu
Parameter Description
ID display Displays the camera ID on screen. Default option is Off.
Mirror
UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual 7
Flips the camera image so that it is correctly orientated for viewing.
Default option is Off.
Parameter Description
DNR Digital noise reduction (DNR) improves the image quality in low light
levels.
When enabled, select the Y and C filter strength: Press Return to return
to the previous menu or Exit & Save to save changes and return to live
mode. Default option is On.
Return Press Enter to return to the previous menu.
Exit & Save Exits the menu and returns to live mode. Saves changes made.
AE/WDR/BLC menu
Select the AE/WDR/BLC option from the Main menu to enter the AE menu.
Figure 7: The AE/WDR/BLC menu
Table 3: AE/WDR/BLC menu
Menu item Description
Lens type Defines the lens type used with the camera.
Select Fixed or DC. If DC is enabled, select the DC level and shutter speed
from the options shown.
WDR/BLC set Wide dynamic range (WDR) allows you to see details of objects in shadows or
details of objects in bright areas of frames that have high contrast between
light and dark areas such as the headlights of a passing car.
Backlight compensation (BLC) function improves image quality when the
background illumination is high. It prevents the object in the center from
appearing too dark.
Options are:
• Off
• WDR: Set the luminance level ( Low, Middle, High)
• BLC fix: set the BLC level (between 1 and 30) and the BLC window.
AGC max Defines the automatic gain control (AGM).
Select a value between 0 and 160.
Flicker This feature to prevent the strobing effect under certain lighting
conditions/shutter speeds.
Default option is Off.
Return Press Enter to return to the previous menu.
Exit & Save Exits the menu and returns to live mode. Saves changes made.
8 UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual
WB mode menu
White balance (WB) tells the dome camera what the color white looks like. Based
on this information, the dome camera will then continue to display all colors
correctly even when the color temperature of the scene changes such as from
daylight to fluorescent lighting, for example.
Select the W/B Mode option from the Main menu to enter the WB Mode menu.
Figure 8: AE/WDR/BLC menu
Table 4: AE/WDR/BLC menu
Menu item Description
ATW The auto track white balance (ATW) function automatically adjusts the WB in real
time as the lighting conditions change. It can be used for both indoor and outdoor
locations.
Manual Manually fix the white balance by adjusting the blue and red ga in parameters.
Only use this function when there is steady light. Values can be adjusted
between -5 and +5.
Outdoor Select this option to optimize the WB for outdoor sunlit applications. The ATW
compensates for high color temperature such as daylight.
Indoor Select this option to optimize the WB for indoor applications. The ATW
compensates for low color temperature such as incandescent lighting.
Anti CR The anti-color rolling mode function minimizes the color changes over long
periods caused by very small differences between the flicker frequency of non-
inverter fluorescent lights and the drive frequency of the image sensor devices.
Return Press Enter to return to the previous menu.
Exit & Save Exits the menu and returns to live mode. Saves changes made.
D/N mode menu
This camera function controls when the dome camera switches to day or night
mode. The dome camera produces hi g h-quality color video during the day or
when light levels are high. At night or when light levels are low the camera
switches monochrome and removes the infrared filter to improve IR sensitivity.
Select the D/N Mode option from the Main menu to enter the D/N mode menu.
UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual 9
Table 5: D/N mode menu
Menu item Description
Auto When set to Auto Day/Night mode, the camera produces high-quality color
video during the day or when light levels are high. It then switches to
monochrome and removes the infrared filter to improve IR sensitivity at
night or when light levels are low. Set following parameters:
Day→Night: Set the threshold level on how dark it should be before
switching from Day to Night mode. Lower (Higher) value makes the
camera switched from Day to Night at lower (higher) illumination
Night→Day: Set the threshold level on how light it should be before
switching from Night to Day mode.
Delay seconds: This is the time in seconds before Day↔Night switches.
A long delay response would be used, for example, to avoid switching
from Night to Day mode when car headlights pass in front of the camera.
CAUTION: If there is a minimal difference between the Day→Night and
Night→Day values, then camera may switc h bet ween D a y and Night
mode repeatedly.
Day Manually select Day mode only. The camera can only be in Day mode.
Night Manually select Night mode only. The camera can only be in Night mode.
Ext Externally triggered D/N.
Return Press Enter to return to the previous menu.
Exit & Save Exits the menu and returns to live mode. Saves changes made.
Motion alarm menu
A motion detection alarm is an alarm that is triggered when the camera detects a
motion. Yo u can define up to four areas on screen where the motion can be
detected as well as the level of sensitivity to motion.
Select the Motion option from the Main menu to enter the Motion menu.
Figure 9: Motion menus
10 UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual
Table 6: Motion alarm menu
Menu item Description
Motion Detec. When enabled, you can set up four motion detection areas (Labels) on
screen.
For each label set the following parameters:
• Label frame: On/Off
• Label color: Blue / Pink / Yellow / Cyan / Coffee / White / Red / Green
• H Start: Start of horizontal position 0 to 23
• H End: End of horizontal position 0 to 23
• V Start: Start of vertical position 0 to 23
• V End: End of vertical position 0 to 23
• Return: Press Enter to return to the previous menu
• Exit & Save: Exits the menu and returns to live mode. Saves changes
made
Defines the motion or face threshold.
MD Detect. Th
Return Press Enter to return to the previous menu.
Select a value between 0 and 127. A lower value means detection is more
sensitive.
Exit & Save Exits the menu and returns to live mode. Saves changes made.
Privacy me nu
Privacy masks let you conceal sensitive areas (such as neighboring windows) to
protect them from view on the monitor screen and in the recorded video. The
masking appears as a blank colored area on screen. You can create up to 4
privacy masks.
Select the Privacy option from the Main menu to enter the Privacy menu.
Figure 10: Privacy mask menus
UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual 11
Table 7: Privacy menu
Menu item Description
Mask 1 Setup
Mask 2 Setup
Mask 3 Setup
Mask 4 Setup
Return Press Enter to return to the previous menu.
Exit & Save Exits the menu and returns to live mode. Saves changes made.
When enabled, you can set up four privacy mask areas on screen.
For each mask set the following parameters:
• Mask: On/Off
• Color: Blue / Pink / Yellow / Cyan / Coffee / White / Red / Green
• H Start: Start of horizontal position 0 to 500
• H End: End of horizontal position 0 to 500
• V Start: Start of vertical position 0 to 280
• V End: End of vertical position 0 to 280
• Return: Press Enter to return to the previous menu
• Exit & Save: Exits the menu and returns to live mode. Saves changes made
Picture adjustment menu
Set the camera image characteristics such as brightness, contrast, sharpness,
hue, and saturation (called “Gain” here) of the picture.
Select the Pict Adjust option from the Main menu to enter the Picture menu.
Figure 11: Picture adjustment menu
Reset camera
Use this function to restore the camera parameters to the factory defaults values.
Select the Reset option from the Main menu to restore factory default values.
Specifications
Model UVD-6120VE-2-P / UVD-6120VE-2-N
Lens type Varifocal: 2.8 to 10 mm
Power supply 24 VAC / 12 VDC
Current 250 mA.
Max: 400 mA (heater on)
12 UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual
Model UVD-6120VE-2-P / UVD-6120VE-2-N
Power consumption 3 W
Max: 9.6 W (heater on)
Operating temperature -30 to +50°C (- 22 to 122°F)
Weight 1130 g (2.49 lbs)
Dimensions
UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual 13
Menu Map
14 UltraView UVD-6120VE-2 Digital WDR Dome Camera User Manual
Loading...