Interlogix TVR-4408HD-12T Quick Start Guide

TruVision DVR 44HD Quick

Figure

1. Connect one audio input to RCA connector.

a mouse, CD/DVD burner or HDD.

9. Connect to a HDTV. The HDMI connection

16. Power switch (on/off).

Start Guide

1: Back panel connections (16-channel model shown)

2. Connect to speakers for audio output.

3. Line in.

4. Connect one CCTV monitor (BNC-type connector).

5. Connect to a RS-232 device.

6. Connect eSATA

7. Connect up to 16 analog cameras to BNC-type connectors (depends on the recorder model).

8. Connect to an optional USB 2.0 device such as

P/N 1072969-EN • REV A • ISS 14APR15

supports both digital audio and video.

10. Connect to a VGA monitor.

11. Connect to a network.

12. Connect up to 16 alarm inputs, such as detectors, push buttons, etc.

13. Connect up to four alarm outputs, such as a siren, flash, relay.

14. Connect to ground.

15. Connect a power cord to the PSU (included).

Figure

2: Front panel controls (8-channel model shown)

1 Display buttons. Used in live view mode.

direction.

5. Receiver for IR remote control.

Press Display to toggle through the single and multiviews. Press Seq to start/stop sequencing in live view mode. Press A to select main monitor. Press B to select event monitor.

2. Front panel lock. Lock or unlock the front panel with a key.

3. Menu and Search buttons: P ress Menu to

enter or exit the main menu. In live mode,

press Search to enter the advanced search menu.

4. Playback buttons: Press Live to switch to live view mode. Press Replay to switch to playback mode and start playing the current file.

Playback buttons: Reverse: In live view

mode, use to play back the oldest available video. In playback mode, play back a camera in the reverse direction. Pause: In live view; freeze the last image for all active cameras. In playback mode, stop playback.

Play: In live view mode, play 24-hour playback of the selected camera. In playback mode, play back the camera in the forward

6. PTZ buttons:

Zoom

: Press to use + and – for digital zoom.

Preset

: Press to call up preprogrammed preset

positions.

Tour

: Press to call up preprogrammed shadow

tours.

7. Enter and arrow buttons: Use the Direction

buttons to navigate in the menus and to control playback. Press Enter to confirm menu selection.

8. Archive button: Press once to enter quick archive mode. Press twice to start archiving.

9. Channel buttons. Switch between different cameras in live view, PTZ control or playback modes.

10. USB 2.0 ports.

11. Status LEDs. Indicates the status of the HDD,

network, and Watchdog, as well as whether there is an external alarm.

2 TruVision DVR 44HD Quick Start Guide

Figure

image.

12. Close Toolbar: Close the toolbar.

3: Quick access toolbar

1. Pause: Freeze live image of the selected camera.

2. Start Manual Recording: Start/stop manual recording.

3. Instant Playback: Play back the recorded video from the last five minutes.

4. Audio On: Enable/disable audio output.

5. Snapshot: Capture a snapshot of a video

Package contents

The TruVision DVR 44HD (model TVR 44HD) is shipped with the following items:

• IR (infrared) remote control

• Two AAA batteries for the remote control

• AC power cords

• USB mouse

• Brackets

• Recorder

• CD with software and manuals

• TruVision DVR 44HD Quick Start Guide

• TruVision DVR 44HD User Manual (on CD)

• TruVision Recorder Operator Guide (on

CD)

Installation environment

Refer to the user manual for detailed information, but observe these important requirements:

• Place the unit in a secure location.

• Ensure that the unit is in a well-ventilated

area.

• Do not expose the unit to rain or moisture.

6. PTZ Control: Enter PTZ control mode.

7. Digital Zoom: Enter digital zoom mode.

8. Image Settings: Modify the image lighting levels.

9. Show Text: Display inserted text on screen.

10. Auxiliary Focus: Automatically focus the camera lens

11. Lens Initialization: Initialize the lens of a camera with a motorized lens

Quick install

Recommended steps for setting up the

recorder:

1. Connect all the devices required to the back panel of the recorder. See Figure 1 on page 1.

Basic connections:

Connect the cameras to the BNC camera inputs and monitor A to the BNC, VGA or HDMI output. Connect the mouse to the USB port in the front panel.

Optional connections:

All the other connections shown are

optional and depend upon installation requirements.

2. Connect the power supply to the unit and turn on the power.

3. Set up the unit with the required settings using the setup Wizard.

First-time use

The recorder has an express installation wizard that lets you easily configure basic recorder settings when first used. It configures

all cameras simultaneously. The configuration can then be customized as required.

TruVision DVR 44HD Quick Start Guide 3

+ 5 hidden pages