Interlogix TVR-1508HD-4T, TVR-1508HD-8T, TVR-1508HD-2T, TVR-1504CHD-1T, TVR-1504CHD-2T Quick Start Guide

TVR 15HD Quick Start Guide

Figure

7. Connect to ground.

15. Connect up to four alarm outputs.

• Password: 1234

1: Back panel connections

1. Connect up to 16 analog cameras to BNC-type connectors (depends on the recorder model).

2. Connect one CCTV monitor (BNC-type connector).

3. Connect to a HDTV. The HDMI connection supports both digital audio and video.

4. Connect four audio inputs to RCA connectors.

5. Power switch (on/off).

6. Connect to a RS-232 device.

Default user ID and password:

• User ID: admin

P/N 1073202-EN • REV B • ISS 14NOV16

8. Connect to an optional USB device such as a mouse, CD/DVD burner or HDD.

9. Connect to a VGA monitor.

10. Connect to speakers for audio output.

11. Connect to a network.

12. Connect to a RS-485 device such as a PTZ camera or a keypad.

13. Connect to the 12 VDC PSU (included).

14. Connect up to 16 alarm inputs.

Default IP address: 192.168.1.82

Figure

For detailed

. Channel buttons Switch between different cameras in live, PTZ control or playback modes.

. Display buttons

. IR receiver Receiver for IR remote.

. Status LEDs

2: Front panel controls (8-channel model shown)

information on all the button functions, please refer to the user manual.

Name Description

Use the soft keyboard to enter numerals 0 to 9.

Display: In multiview mode, toggle through the various multiviews (full, quad, 1+5, 1+7, 9 and 16).

In HDD information mode and user management mode delete a selected item. In PTZ mode, delete a selected key point. In Log Search mode, display the details of a log file in Log Search result.

Menu and Search buttons

Playback buttons

Seq: In Live View mode, start/stop sequencing cameras on the current monitor.

Menu: Enter/exit the main menu.

Search: In live view, enter the advanced search menu.

To connect the remote control to the recorder, press the Device button, enter the device address, and press Enter. See “IR remote control” Error! Bookmark not

defined. for more information.

Power: A steady green light indicates the recorder is working correctly. Red

indicates a fault.

Event Al arm: A flashing red light indicates that there is a sensor Alarm In or

another alarm such as motion or tampering. No light indicates that there is no alarm.

HDD: HDD indicator blinks red when data is being read from or written to the

HDD. A steady red light indicates an HDD exception or error.

Tx/Rx: Steady green indicates a normal network connection. No light indicates

that it is not connected to a network.

Technical Alarm: A steady red light indicates that there is a technical alarm from

the recorder. No light indicates that there is no alarm.

Reverse: In live view mode, use to play back the earliest video. In playback mode,

playback a camera in the reverse direction.

Pause: In live view, freeze the last image of the live display for all active cameras

displayed. In playback mode, stop playback.

2 TVR 15HD Quick Start Guide

Name Description

Figure

12. Close: Close the toolbar.

Play: In live view mode, play all day playback of the current camera (upper-left

video tile if in multiview mode). In playback mode, play back a camera in the forward direction. In search mode, play back a selected video or view a snapshot. In PTZ mode, do an auto tour.

. PTZ buttons

Live: Switch to live view mode.

: In playback mode, start playing the current file. Starts at the beginning of

Replay

the file.

Zoom +/-: In live view mode, playback mode, and PTZ control mode use this

button to zoom in and out. Also use them to navigate within menus.

: In PTZ Control mode, press Preset and a numeric button to call the

Preset

specified preset.

Also use to edit holiday mode, video search mode, HDD selection mode, user management mode, bookmark management, and bookmark search.

: In PTZ Control mode, press Tour and a numeric button to call the specified

Tour

shadow tour.

Also use to scroll between calendar months and to navigate in a text field.

. Direction

Enter button

. Archive button

0. USB Interface

The DIRECTION buttons are used to navigate between different fields and items in menus.

The ENTER button is used to confirm selection in any of the menu modes.

Press once to enter quick archive mode. Press twice to start archiving. Indicator blinks green when data is being written to backup device.

Universal Serial Bus (USB) port for additional devices such as a USB mouse, CD/DVD burner, or USB Hard Disk Drive (HDD).

3: Live view toolbar

1. Pause: Freeze live image of the selected camera.

2. Start Manual recording: Start/stop manual recording.

3. Instant Playback: Play back the recorded video from the last five minutes.

4. Audio On: Enable/disable audio output.

5. Snapshot: Capture a snapshot of a video image.

TVR 15HD Quick Start Guide 3

6. PTZ Control: Enter PTZ control mode.

7. Digital Zoom: Enter digital zoom mode.

8. Image Settings: Modify the image lighting levels.

9. Auxiliary Focus: Automaticall y focus the camera lens

10. Lens Initialization: Initialize the lens of a camera with a motorized lens

11. Stream Information: Display the real-time frame rate, bit rate, resolution and video compression.

+ 5 hidden pages