Interlogix TVF-1103 User Manual

TruVision 360° Camera Installation Manual

P/N 1072845A-EN • REV 1.0 • ISS 25SEP14

Trademarks and patents

Manufacturer

Certification

FCC compliance

ACMA compliance

Canada

European Union directives

Contact information

Trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products.

Interlogix. 2955 Red Hill Avenue, Costa Mesa, CA 92626-5923, USA

Authorized EU manufacturing representative: UTC Fire & Security B.V. Kelvinstraat 7, 6003 DH Weert, The Netherlands

N4131

Class A: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Notice! This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-0330 du Canada.

12004/108/EC (EMC directive): Hereby, UTC Fire & Security declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC.

2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.

For contact information, see www.interlogix.com or www.utcfssecurityproducts.eu.

Content

Introduction 2

Product overview 2

Installation 3

Installation environment 3 Package contents 3 Cable requirements 4 Camera description 5 Install the camera 6 IR illuminators 8 Accessing the SD card 8 Mounting accessories 9

Network settings 10

Using the web browser to configure 11 Using the camera with an Interlogix NVR or another system 13 Using the camera with TruVision Navigator 13

Specifications 13

Pin definitions 14

Installation Manual 1

Introduction

Product overview

This is the user manual for TruVision 360° camera models:

SKU Description

TVF-1101 TruVision 360 Degree IP Dome, 3.0 MPX, WDR, 1.19mm

TVF-3101 TruVision 360 Degree IP Dome, 3.0 MPX, WDR, 1.19mm

TVF-1102 TruVision 360 Degree IP Dome, 3.0MP, WDR, 1.19mm fisheye

TVF-3102 TruVision 360 Degree IP Dome, 3.0MP, WDR, 1.19mm fisheye

TVF-1103 TruVision 360 Degree IP Dome, 6.0MP, DWDR, 1.27mm

TVF-3103 TruVision 360 Degree IP Dome, 6.0MP, DWDR, 1.27mm

TVF-1104 TruVision 360 Degree IP Dome, 6.0MP, DWDR, 1.27mm

TVF-3104 TruVision 360 Degree IP Dome, 6.0MP, DWDR, 1.27mm

fisheye lens, true D/N, 10m IR, 2 way audio (built-in mic & speaker), SD/SHDC slot, POE (803.af) /12VDC, PAL.

fisheye lens, true D/N, 10m IR, 2 way audio (built-in mic & speaker), SD/SHDC slot, POE (803.af) /12VDC, NTSC

lens, true D/N, 10m IR, 2 way audio (built-in mic & speaker), SD/SHDC slot, POE (803.af) /12VDC, IP66, IK10, PAL

lens, true D/N, 10m IR, 2 way audio (built-in mic & speaker), SD/SHDC slot, POE (803.af) /12VDC, IP66, IK10, NTSC

fisheye lens, true D/N,10m IR, 2 way audio (built-in mic & speaker), SD/SHDC slot, POE (803.af) /12VDC, PAL

fisheye lens, true D/N,10m IR, 2 way audio (built-in mic & speaker), SD/SHDC slot, POE (803.af) /12VDC, NTSC

fisheye lens, true D/N, 10m IR, 2 way audio (built-in mic & speaker), SD/SHDC slot, POE (803.af) /12VDC, IP66, IK10, PAL

fisheye lens, true D/N, 10m IR, 2 way audio (built-in mic & speaker), SD/SHDC slot, POE (803.af) /12VDC, IP66, IK10, NTSC

2 Installation Manual

Installation

This chapter provides information on how to install the cameras.

Installation environment

When installing your product, consider these factors:

• Electrical: Install electrical wiring carefully. It should be done by qualified service personnel. Always use a proper PoE switch or a 12 VDC UL listed Class 2 or CE certified power supply to power the camera. Do not overload the power cord or adapter.

• Ventilation: Ensure that the location planned for the installation of the camera is well ventilated.

• Temperature: Do not operate the camera beyond the specified temperature, humidity or power source ratings. The operating temperature of the camera is between -30 to +60°C. Humidity is below 90%.

• Moisture: Do not expose the camera to rain or moisture, or try not to operate it in wet areas. Turn the power off immediately if the camera is wet and ask a qualified service person for servicing. Moisture can damage the camera and also create the danger of electric shock.

• Servicing: Do not attempt to service this camera yourself. Please refer to the instructions in this manual when removing the camera cover. Refer all servicing to qualified service personnel.

• Cleaning: Do not touch the bubble with fingers. If cleaning is necessary, use a clean cloth with some ethanol and wipe the camera bubble gently.

Package contents

Check the package and contents for visible damage. If any components are damaged or missing, do not attempt to use the unit; contact the supplier immediately. If the unit is returned, it must be shipped back in its original packaging.

Indoor camera Outdoor camera

Installation Manual 3

+ 11 hidden pages