TruVision TVE-120-420-820-1620
Figure
1
4
8-channel / 16-channel:
1
2
3
4
5
6
Encoder Quick Start Guide
1: Front panel
-channel:
-channel:
. Audio Out: Connect to speakers for audio output.
. Line In
. Power: The LED lights up RED when the device is working. It is not lit when the device is powered down.
. Video In: Connect a CCTV monitor (BNC-type connectors).
. Audio In: Connect an audio input to RCA connectors.
.
TX/R X: The LED is not lit when there is no network connection. It lights up green and flashes when data
is being transmitted/received.
P/N 1073659-EN • REV C • ISS 12NOV19 1
Figure
2: Back panel
1
Figure
8
16
-channel / 4-channel
1. Alarm In
2. Alarm Out / Audio In, RCA connector
3. RS-232 serial interface
4. RS-485 serial interface
3: Back panel
-channel:
5. Reset button
6. Micro SD card slot
7. LAN network interface
8. 12 VDC power input
9. GND
-channel:
6. RS-485 serial interface
7. 12 VDC power input
8. Alarm In/Out
9. Power switch
10. GND
1. Video In
2. Audio In, RCA connector
3. Audio Out, RCA connector
4. RS-232 serial interface
5. LAN network interface
2 TruVision TVE-120-420-820-1620 Encoder Quick Start Guide
Figure
Alarm i
Alarm input connections for normal alarm:
7. 12 V or 24 V relay
Connections
4: Alarm input connections
nput connections for Emerson alarm:
1. Emerson alarm
2. V output
3. 10 V regulator
4. 4N35 optocoupler
5. Relay output
6. Normal alarm
Package contents
The TruVision TVE-xx20 IP video encoder is
shipped with the following items:
• TVE encoder
• Power adaptor (8-ch and 16-ch encoder
models only)
• Power cable (8-ch and 16-ch encoder
models only)
• 19” rack brackets (8-ch and 16-ch encoder
models only)
• Quick start guide
TruVision TVE-120-420-820-1620 Encoder Quick Start Guide 3
The user manual and quick start guide are
available from our web sites. They are
available in several languages.
Contact information and manuals
For contact information and to download the
latest manuals, tools, and firmware, go to the
web site of your region.
Americas: www.interlogix.com
EMEA: www.firesecurityproducts.com
Manuals are available in several languages.
Australia/New Zealand: www.utcfs.com.au
Getting started
This guide provides basic information on
setting up the TVE-120, TVE-420, TVE-820
and TVE-1620 models.
All encoder configuration and control is done
via the webpage. Before you start using the
encoder, you must first activate the device by
setting up a strong password.
Default network settings
The default network settings are:
• IP address - 192.168.1.70
• Subnet mask - 255.255.255.0
• Gateway address - 192.168.1.1
• HTTP port: 80
• Server: 8000
When you first start up the device, the
Activation window appears. You must define a
high security admin password before you can
access the device. There is no default
password provided.
Tips on creating a strong password:
• A valid password range must be between 8
and 16 characters. You can use a
combination of numbers, lower and upper
case letters, and special characters: _ - , *
& @ / $ ? Space. The password must
contain characters from at least two of
these groups.
• The password is case-sensitive so use a
mixture of upper and lower case letters.
• Do not use personal information or
common words as a password
Accessing the web browser
The encoder is shipped with web browser
menus in 12 languages: English, Simplified
Chinese, Dutch, Finnish, French, German,
Italian, Polish, Portuguese, Russian, Spanish,
and Turkish.
To access the web browser: (Internet
Explorer only)
1. Open the web browser and select your
language.
2. Enter the IP address of the encoder (for
example, http://192.168.1.70). Press the
Enter key on the computer. The system
displays the login window.
3. Enter the user name (default: admin) and
password to log into the system. The
encoder’s main page appears, which by
default is Live View.
Device manager network settings
Use TruVision Device Manager to find and
configure the IP address and other
parameters of the device. This tool
automatically identifies TruVision devices that
support “auto-discovery” anywhere on the
network, even in different subnets.
To use the TruVision Device Manager:
1. Download the tool from our website.
2. Double-click the shortcut icon to open the
tool. Click Device Manager to begin the
discovery process. The list of TruVision
devices located on your network appears.
Note: The TruVision Device Manager can
only detect devices that are on the same
LAN. The tool cannot detect devices
placed on a VLAN.
3. Change the device settings as required.
Click X on the top right corner when
completed.
Browser configuration
There are two main configuration menus in the
in the menu toolbar:
Browser Configuration
Remote Configuration
Use the Browser Configuration menu to
manage the protocol type, live view
performance and local storage paths. In the
Configuration panel, click Browser
Configuration to display the browser
configuration window..
4 TruVision TVE-120-420-820-1620 Encoder Quick Start Guide
Use the Remote Configuration menu to
Consumption
Power
Built
Operating temperature:
Relative humidity:
Dimensions
(W x H x D):
Weight:
Consumption
Power
Built
Operating temperature:
Relative humidity:
Dimensions
(W x H x D):
Weight:
configure the camera, VCA, network settings,
recording, alarm and events setup, device
management, user management, and to see
system information.
See “Encoder menu tree” on page 6 for
description of the encoder menu tree.
Specifications
TVE-120 & TVE-420:
≥15 W
source: 12 VDC, PoE
-in storage:
1.5 kg (3.3 lb.)
TVE-820 & TVE-1620:
TVE-820: ≤ 20 W
source: 12 VDC, PoE
-in storage: None
2 kg (4.4 lb.)
Built-in micro SD slot, up
to 128 GB
-10 to +55 C°
(14 to 131 °F)
10 to 90%
162.5 × 114 × 47.5 mm
(6.4 × 4.5 × 1.9 in.)
TVE-1620: ≤ 25 W
-10 to +55 C°
(14 to 131 °F)
10 to 90%
380 × 320 × 48 mm
(15.0 × 12.65 × 1.9 in.)
TruVision TVE-120-420-820-1620 Encoder Quick Start Guide 5
Encoder menu tree
6 TruVision TVE-120-420-820-1620 Encoder Quick Start Guide
Legal and regulatory information
Copyright
© 2019 United Technologies Corporation. All rights
reserved. Interlogix is part of UTC Climate, Controls &
Security, a unit of United Technologies Corporation. All
rights reserved
Trademarks and patents
Trade names used in this document may be trademarks
or registered trademarks of the manufacturers or vendors
of the respective products.
Disclaimer
Information in this document is subject to change without
notice.
Certification
cUL
Safety Instructions:
Improper use or replacement of the battery may result in
explosion hazard. Replace with the same or equivalent
type only. Dispose of used batteries in conformance with
the local codes.
Instructions de sécurité :
L’utilisation ou le remplacement inadéquats de la pile
peuvent entraîner un risque d’explosion. Remplacez-la
par le même type ou l’équivalent du même type
seulement. Jetez les piles usagées conformément aux
directives fournies par le fabricant de la pile.
EU directives
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU,
the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive):
2013/56/EU & 2006/66/EC (battery directive):
Battery Disposal
This product contains a battery that cannot be disposed
of as unsorted municipal waste in the European Union.
See the product documentation for specific battery
information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling retur n
the battery to your supplier or to a designated collection
point. For more information see: www.recyclethis.info.
Product warnings and disclaimers
THESE PRODUCTS ARE INTENDED FOR SALE TO
AND INSTALLATION BY QUALIFIED
PROFESSIONALS. UTC FIRE & SECURITY CANNOT
PROVIDE ANY ASSURANCE THAT ANY PERSON OR
ENTITY BUYING ITS PRODUCTS, INCLUDING ANY
“AUTHORIZED DEALER” OR “AUTHORIZED
RESELLER”, IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE AND
SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
www.firesecurityproducts.com/policy/product-warning/ or
scan the following code:
Equipment Disposal
Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more
information see: www.recyclethis.info.
TruVision TVE-120-420-820-1620 Encoder Quick Start Guide 7
8 TruVision TVE-120-420-820-1620 Encoder Quick Start Guide
Loading...