Interlogix TVD-5125TE-3 User Manual

TVD-5125TE-3 IR Dome
Camera Pocket Guide

1: Cables





A. Video cable; B. Power cable

P/N 1072504A • REV A.02 • ISS 04JUN12

2: Front of the camera

A. LED IR lights; B. Lens; C. Light sensor

3: Dimensions

2

Overview

This is the pocket guide for the TVD-5125TE-3-P /
TVD-5125TE-3-N IR Dome Camera. The guide
describes a standard installation.

The camera consists of the following:

 Camera with power and video output cables

 Hex wrench

Refer to the figures in the front of the guide when
performing the camera setup procedures.

Installation

To install the camera:

1. Using the mount as a template, place it level
against the mounting surface and mark the
position of the mounting holes.

2. Following all local codes, drill and prepare the
mounting holes.

3. Securely fasten the mount to the mounting
surface with the appropriate fasteners.

4. If needed, seal all mounting holes so that no
moisture can leak into the mounting surface.

3