Interlogix TruVision TVD-6120VE-2, TruVision TVD-6125VE-2 User Manual
TruVision TVD-6120VE-2 /
TVD
-6125VE-2 Camera
User Manual
P/N 1072541C-EN • ISS 27JUL12
Copyright
©
2012 UTC Fire & Security. All rights reserved.
Trademarks and
patents
The
TruVision and Interlogix names and logo are trademarks of
UTC
Fire & Security.
Other trade names used in this document may be trademarks or
registered
trademarks of the manufacturers or vendors of the
respective products.
Manufacturer
UTC Fire & Security Americas Corporation, Inc.
2955 Red Hill Avenue, Costa Mesa, CA 92626
-5923, USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, The Netherlands
Certification
N4131
FCC compliance
Class A:
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated i
n a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction m anual, m a y cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
ACMA compliance
Notice!
This is a Class A product. In a domestic environment this
product may cause rad
io interference in which case the user may be
required to take adequate measures.
European Union
directives
12004/108/EC (EMC directive):
Hereby, UTC Fire & Security
declares that this device is in compliance or with the essential
requirements and other
relevant provisions of Directive 2004/108/EC
2002/96/EC (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted municip al waste in the Eur op ean
Union. For proper recycling, return this product to your local supplier
upon
the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info.
Contact information
For contact information
, see www.utcfireandsecurity.com or
www.utcfssecurityproducts.eu
.
TruVision TVD-6120VE-2 / TVD-6125VE-2 Camera User Manual 1
Content
Product overview 2
Package Contents 2
Features 2
User guidelines 2
Product description 3
Installation 4
Mount the camera 4
Connect the cables 5
Adjust the lens 5
Programming 7
OSD control button 7
Access the Setup menu 7
Save changes 9
Select the lens type 9
Set shutter/AGC 9
Set white balance 10
Set backlight compensation (BLC) 11
Adjust the picture characteristics 12
Set ATR-EX level 12
Set motion detection 13
Set privacy area 13
Set Day/Night mode 14
Set image noise reduction 15
Set the camera ID 15
Set sync mode 16
Select the language 16
Reset camera settings 16
Specifications 17
Dimensions 17
Menu Map 18
2 TruVision TVD-6120VE-2 / TVD-6125VE-2 Camera User Manual
Product overview
The TVD-6120VE-2-N(-P)/ TVD-6125VE-2-N(-P) color dome camera uses a
digital signal processor (DSP) to process video signals. The camera includes a
microcontroller to provide high-quality images with high-color reproduction and
sharp pictures.
Package Contents
The package contains the foll owing:
• Camera
• Hex key
• Drilling template
• Composite video BNC cable
• Screws
• Quick Start Guide
Features
The camera includes the following features:
• Super HAD II (hole accumulated diode) technology
• High horizontal resolution 600 TVL
• Smart digital control automatic BLC (backlight compensation)
• Digital WDR (wide dynamic range)
• Advanced auto exposure system for both fixed iris and auto iris lenses to
optimize the amount of light
• Internal synchronization
• Eight privacy mask areas to protect privacy concerns
• Signal-to-noise ratio better than 52 dB
• Long life and high reliability
• Isolated switching power 12 VDC and 24 VAC
User guidelines
• Program the camera settings as much as possible before mounting the
camera. Take appropriate safety precautions while completing programming
after installation.
• Always use a 12 VDC or 24 VAC UL listed Class 2 power supply to power the
camera.
TruVision TVD-6120VE-2 / TVD-6125VE-2 Camera User Manual 3
• Do not use the camera over the temperature range specifications: -10°C to
+50°C (14°F to 122°F)
• If the light source where the camera is installed experiences rapid, widevariations in lighting, the camera may not operate as intended.
WARNING: To reduce the risk of fire or electronic shock, do not expose the
camera to rain or moisture or open the back of the camera.
Product description
Figure 1: Product description
1. Dome cover
2. Screw hole
3. Base
4. OSD control button
5. Lens
6. IR LED
7. IR LED cover
8. Outlet hole
9. Power supply and video BNC cables
10. Composite video BNC cable
11. Focus adjustment
12. Zoom adjustment
4 TruVision TVD-6120VE-2 / TVD-6125VE-2 Camera User Manual
Installation
Please check the package contents and make sure that the device in the
package is in good condition and all the assembly parts are included.
To install the camera you will need to prepare the mounting surface, mount the
camera, make cable connections, and adjust the lens.
Note: Before installing, please ensure that the mounting surface is strong enough
to withstand three times the weight of the camera. If the mounting surface is not
strong enough, the camera may fall and cause serious damage.
Mount the camera
To mount the camera:
1. Prepare the mounting surface.
2. Remove the dome cover.
3. Secure the camera to the mounting surface with screws.
4. Remove the IR LED cover to adjust the lens and the viewing angle.
Loading...