GE
Fiber Optic
Security
Video/Data Transmitters and Receivers
Overview
S739DV and S7739DV Video and Control Data Systems represent a
major advance in fiber-optic links for up-the-coax control systems.
In up-the-coax systems, electrical signals are transmitted over
coaxial cable. S739DV models feature multimode operation, while
S7739DV models operate over single mode fiber. S739DV-PKG kits
include a standalone multimode transmitter, a standalone multimode receiver, and two power supplies.
Multiple System Compatibility
In addition to video and control, these fiber links transmit response
signals from the camera station to the control station. They can
also transmit embedded genlock sync signals if the control system
uses this feature. S739DV and S7739DV links work with most major
brands of up-the-coax systems.
Standard Features
•
One-way video and two-way control, response and Genlock
transmission over one or two fibers
•
Single and multimode models available
•
Compatible with most major up-the-coax control systems
•
800 TV lines video resolution
•
Operates up to 31 miles (50 km), control system dependent
•
Modern, heavy-duty housing design
•
SMARTS™ diagnostics
•
Standalone package includes a multimode transmitter, a multimode receiver, and two power supplies
Superior Diagnostics
The SMARTS™ diagnostic technology provides input/output LEDs
for video, command, response, Genlock sync, and optical signal
strength.
Single-Channel Video, Universal
Up-The-Coax Data
S739DV, S7739DV and S739DV-PKG
S739DV-PKG
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Related Diagram
Transmitter
Video/UTC
In/Out
Optical Fiber
UTC = Up the Coax Control, Response and Genlock Signals
613P Power Supply (2 included with S739DV-PKG)
Input Power 100 - 240 VAC, 60/50 Hz
Output Voltage 13.5 VDC regulated
Output Current 1.3 A maximum
Power Consumption 18 W
AC Connection Connects to standard wall outlet
Dimensions 1.27” x 2.3” x 4.35”
Weight 0.79 lbs (0.36 kg)
Receiver
Video/UTC
In/Out
Specifications
Video S739DV (Multimode) S7739DV (Single Mode)
Channels 1
Format EIA, CCIR, NTSC and PAL
Input/Output Signal 1.0 V p-p composite
Bandwidth 10 MHz
Video Resolution 800 TVL
Signal-to-Noise Ratio > 54 dB
Input/Output Impedance 75 ohms
Differential Phase < 3°
Differential Gain < 3%
Data
u
Formats
Location in vertical Interval Control signal imposed on lines 8-19 (even fields)
Pulse Amplitude 50 mV to 2 V
Genlock Sync
Detection Area Can be imposed on all lines outside the control area
Sync Amplitude Up to 6 V
Optical
Mode Multimode Single Mode
Optical Budget* 13 dB
Emitter LED or Laser (depending on
Wavelength 850 nm and/or 1300 nm 1310 nm and 1550 nm
Operating Distanceu** Up to 11 mi. (18 km) 31 mi. (50 km)
Gain Control Optical Automatic Gain Control (OAGC)
Launch Power -15 dBm minimum
Receiver Sensitivity -28 dBm minimum
Electrical
Input Power, standalone units 13.5 VDC regulated
Input Power, rack units 13.5 VDC regulated
Current Requirement 400 mA (transmitter); 380 mA (receiver)
Power Consumption 5.4 W (transmitter); 5.1 W (receiver)
Power Factor 4 (rack units only)
Protection Solid-state short circuit protection
Optional Power Supply Model 613P (DC)
Environmental
Operating Temperature -40 to 167°F (-40 to 75°C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD), standalone units 5.0 in. x 4.8 in. x 1.5 in. (127 mm x 122 mm x 38 mm)
Dimensions, rack units 1 slot (1.0 in.)
Weight Standalone 1.21 lb. (0.55 kg); rack 0.7 lb. (0.32 kg)
Construction Polycarbonate (standalone); Aluminum (rack)
American Dynamics, Baxall Burle, Elbex (sync and control),
Panasonic (PTZ and VD2), Pelco, Robot, Sensormatic,
VCS, Vicon, Videoalarm, and others
and lines 9-20 (odd fields)
LED
wavelength)
Ordering Information
Use the Configurators below to select the options available for these products.
u
* Optical Budget based on 62.5 µm fiber, for 50/125 µm fiber subtract 3 dB.
** Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S739DV-2006-09-2
imagination at work
Check with control system manufacturer for distance limits.
Includes a standalone multimode transmitter, a standalone multimode receiver, and two power supplies.