Interlogix S7732DVT-EFC2 Specsheet

Singlemode

Video, 2-Way MPD Data Tx, SM, Can

One-Way Video and Two-Way Multiprotocol Data

The S7732DV series provide transmission of one-way video and
two-way multiprotocol data over one or two singlemode fibers. The
standalone transmitter has been designed especially for easy
installation. The rack version is intended for use with the
515R1/517R1 rack mount card cages. The units utilize 8-bit video
processing of the video component along with a signal-to-noise ratio
>55 dB that assures clean, noise-free video at the receiver. The data
functions include the unique data translation feature, which allows
one data format to be input and a different data format to be output.
Data formats are selected during installation and can be easily
changed in the field via rotary switch. The SMARTS diagnostic
technology provides an extensive set of built-in diagnostic tools
including a video test pattern generator that allows failures to be
diagnosed from the monitor. LEDs provide a visual indication of the
operating status of the equipment. Certain models of the S7732DV
series incorporate Coarse Wavelength Division Multiplexer (CWDM)
technology for maximum distance capability using a single
multimode fiber.

Specifications

Video

Channels1 simplex

FormatNTSC and PAL

Input/Output Signal1.0 Vpp composite

Bandwidth6.5 MHz

Video Resolution520 TVL

Signal-to-Noise Ratio>55 dB

Input/Output Impedance75 Ohms

Differential Phase0.7°

Differential Gain%

Data

Channels1 duplex

FormatsRS-232 (3-wire/5-wire), TTL, RS-422, RS-485

Baud Rate250 bps to 512 kbp or 15 kHz (depending on data format)

Bit Error Rate<1.0E-9

Optical

ModeSinglemode

Optical Budget18 dB

EmitterLED or Laser

Wavelength1310 nm or 1550 nm (depending on model)

Operating DistanceUp to 37 mi (60 km) (depending on model)

Launch Power-15 dBm

Receiver Sensitivity-28 dBm

Gain ControlOptical Automatic Gain Control (OAGC)

Electrical

Input Power24 VAC or 13.5 VDC regulated

Input Power, Rack Units13.5 VDC regulated

Current Requirement450 mA

Power Consumption6 W

Power Factor4 (rack units only)

ProtectionSolid-state short circuit protection

Power SupplyModel 615P-1/EU or 615P-1/UK (optional)

Environmental

Operating Temperature-40 to 167 °F (-40 to 75 °C)

Maximum Humidity95% relative, noncondensing

Standards

EmmissionsFCC Part 15, ICES-003, AS/NZS 3548, EN55022

ImmunityENV50204, EN61000-4-2, -3, -4, -5, -6, -11

SafetyUL 1950, CAN/CSA 22.2, NO. 950-95

Laser Safety21CFR1040, EN60825-1, -2

S7732DVT-EFC2

Mechanical

Dimensions (LWD), Standalone
Units

WeightStandalone 1.2 lbs (0.54 kg); rack 0.6 lbs (0.27 kg)

ConstructionSteel (standalone); Aluminum (rack)

Ordering Information

S7732DVT-EFC2

One-way video, two-way multiprotocol data

E

transmission over one or two singlemode fibers

E

8-bit video processing

E

520 TVL resolution

E

Unique data transmission function

E

With either ST or FC connectors available

E

Field-selectable data format

E

(2-wire/4-wire), Manchester, Biphase, SensorNet, DTMF
control

18 dB optical buget (20dB on CWDM models)

E

Supports all major video formats

E

OAGC (Optical Automatic Gain Control)

E

Standalone or rack configurations

E

SMARTS diagnostics

5.0'' x 4.8'' x 1.5'' (127 x 122 x 38 mm)

Video, 2-Way MPD Data Tx, SM, Can

WEBIPS-SA-S7732DVT-EFC2-2014-02-17 05:41:27 www.utcfssecurityproducts.co.za