Interlogix S7732DVR-RFC2 Specsheet
Product Data Sheet
S7732DVR-RFC2
Video, 2-Way MPD Data Rx, SM, Rack
Overview
The S732DVT-PST1provide transmission of
one-way video and two-way multiprotocol data
over one multimode optical fiber. A complete
system consists of a transmitter and a receiver.
The S732DVT is designed to operate with the
Pelco Spectra III™ camera systems.
Video Processing
The units utilize 8-bit video processing of the
video component along with a signal-to-noise
ratio >55 dB that assures clean, noise-free video
at the receiver. It accepts monochrome and color
signals in NTSC and PAL formats. Full-frame,
real-time video transmission delivers all the video
captured by the camera.
Camera / Dome Interface
The unit mounts directly inside the camera
housing back box and connects to the existing
electronic circuit board. The integral fiber
eliminates the need for external coaxial cable.
Superior Diagnostics
The SMARTS™ diagnostic technology provides
an extensive set of built-in diagnostic tools
including a video test pattern generator that
allows failures to be diagnosed from the monitor.
LEDs provide a visual indication of the operating
status of the equipment.
Standard Features
One-way video, two-way multiprotocol data
E
transmission over one or two singlemode fibers
E
8-bit video processing
E
520 TVL resolution
E
Unique data transmission function
E
With either ST or FC connectors available
E
Field-selectable data format
E
18 dB optical buget (20dB on CWDM models)
E
Supports all major video formats
E
OAGC (Optical Automatic Gain Control)
E
Standalone or rack configurations
E
SMARTS™ diagnostics
S7732DVR-RFC2
Video, 2-Way MPD Data Rx, SM, Rack
Specifications
Video
Channels 1 simplex
E
Format NTSC and PAL
E
Input/Output Signal 1.0 Vpp composite
E
Bandwidth 6.5 MHz
E
Video Resolution 520 TVL
E
Signal-to-Noise Ratio >55 dB
E
Input/Output Impedance 75 Ohms
E
Differential Phase 0.7°
E
Differential Gain %
E
Data
Channels 1 duplex
E
Formats RS-232 (3-wire/5-wire), TTL, RS-422, RS-485 (2-wire/4-wire), Manchester,
E
Biphase, SensorNet, DTMF control
Baud Rate 250 bps to 512 kbp or 15 kHz (depending on data format)
E
Bit Error Rate <1.0E-9
E
Optical
Mode Singlemode
E
Optical Budget 18 dB
E
Emitter LED or Laser
E
Wavelength 1310 nm or 1550 nm (depending on model)
E
Operating Distance Up to 37 mi (60 km) (depending on model)
E
Launch Power -15 dBm
E
Receiver Sensitivity -28 dBm
E
Gain Control Optical Automatic Gain Control (OAGC)
E
Electrical
Input Power 24 VAC or 13.5 VDC regulated
E
Input Power, Rack Units 13.5 VDC regulated
E
Current Requirement 450 mA
E
Power Consumption 6 W
E
Power Factor 4 (rack units only)
E
Protection Solid-state short circuit protection
E
Power Supply Model 615P-1/EU or 615P-1/UK (optional)
E
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
E
Maximum Humidity 95% relative, noncondensing
E
Standards
Emmissions FCC Part 15, ICES-003, AS/NZS 3548, EN55022
E
Immunity ENV50204, EN61000-4-2, -3, -4, -5, -6, -11
E
Safety UL 1950, CAN/CSA 22.2, NO. 950-95
E
Laser Safety 21CFR1040, EN60825-1, -2
E
Mechanical
Dimensions (LWD), Standalone Units 5.0'' x 4.8'' x 1.5'' (127 x 122 x 38 mm)
E
Weight Standalone 1.2 lbs (0.54 kg); rack 0.6 lbs (0.27 kg)
E
Construction Steel (standalone); Aluminum (rack)
E
Ordering Information
S7732DVR-RFC2
Single-channel, rack card - digital video receiver with 2-way
multiprotocol data, 2 fiber - FC
As a company of innovation, UTC Fire & Security reserves the right to change product specifications without notice. For the latest
product specifications, visit UTC Fire & Security online or contact your UTC Fire & Security sales representative.
IPS-SA-S7732DVR-RFC2-2014-02-17 04:44:45
Loading...