Interlogix S7732DVR-RST1-R, S7732DVR-RST1, S7732DVR-RST2, S7732DVT-EFC1, S7732DVT-EST1 Specsheet
...
GE
GE
Security
Security
Fiber Optic
Video/Data Transmitters and Receivers
Overview
S732DV and S7732DV fiber links provide transmission of one-way
video and two-way multiprotocol data over one or two optical
fibers. S732DV models feature multimode operation, while S7732DV
models operate over single mode fibers. The links can be supplied
as either a standalone module or as a rack card that can be installed in a standard 19-inch card cage. A complete system consists
of a transmitter and a receiver. S732DV-PKG kits include a standalone multimode transmitter, a standalone multimode receiver, and
two power supplies.
Video Processing
The units utilize 8-bit video processing of the video component
along with a signal-to-noise ratio >55 dB that assures clean, noisefree video at the receiver.
Data Translation
The data functions include the unique data translation feature,
which allows one data format to be input and a different data format to be output. Data formats are selected during installation and
can be easily changed in the field via rotary switch.
Multoprotocol Data Formats
The unique multiprotocol data design accepts all major data
formats. This allows the S(7)732DV-PKG to be retained if there is a
change of video control systems.
Superior Diagnostics
The SMARTS™ diagnostic technology provides an extensive set of
built-in diagnostic tools including a video test pattern generator
that allows failures to be diagnosed from the monitor. LEDs provide
a visual indication of the operating status of the equipment.
CWDM Technology
Certain models of the S732DV series incorporate Coarse Wavelength Division Multiplexer (CWDM) technology for maximum
distance capability using a single multimode fiber.
Standard Features
One-way video, two-way multiprotocol data transmission over
•
one or two fibers
Single and multimode models available
•
8-bit video processing
•
520 TV lines video resolution
•
Unique data translation function
•
Field-selectable data format
•
13 dB optical budget (20 dB on CWDM models), or 18 db on
•
single-mode models
Supports all major data formats
•
Standalone or rack configurations
•
•
Standalone package includes a multimode transmitter, a multimode receiver, and two power supplies
Single-Channel
Video and Two-Way
Multiprotocol Data
S732DV, S7732DV and S732DV-PKG
S732DV-PKG
GE
imagination at work
Related Diagram
Specifications
Video S732DV (Multimode) S7732DV (Single Mode)
Channels 1 simplex
Format NTSC and PAL
Input/Output Signal 1.0 V pk - pk
Bandwidth 6.5 MHz
Video Resolution 520 TV lines
Signal-to-Noise Ratio >55 dB
Input/Output Impedance 75 ohms
Differential Phase <3°
Differential Gain <3%
Data
Channels 1 duplex
Formats RS-232 (3-wire/5-wire), TTL, RS-422,
RS-485 (2-wire/4-wire), Manchester, Biphase, SensorNet , DTMF control
Baud Rate 250 kbps to 512 kbps or 15 kHz (depending on data format)
Bit Error Rate <1.0E-9
Optical
Mode Multimode Single Mode
Optical Budget* 13 dB (20 dB on CWDM models) 18 dB
Emitter LED or Laser
Wavelength 850 nm and/or 1300 nm
(depending on model); 1310 nm
and 1330 nm on CWDM models
1310 nm and/or 1550 nm
(depending on model)
Operating Distance** Up to 4.0 mi (6.5 km)
(depending on model) (RST1L > (7.5 mi 12 km)
Up to 37 mi (60 km)
(depending on model)
Launch Power -15 dBm
Receiver Sensitivity -28 dBm
-10 dBm
-28 dBm
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power, Standalone Units 24 VAC or 13.5 VDC regulated
Input Power, Rack Units 13.5 VDC regulated 13.5 VDC regulated
Current Requirement 450 mA
Power Consumption 6 W
Power Factor 4 (rack units only)
Protection Solid-state short circuit protection
Power Supply Model 613P (optional)
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD), Standalone
Units
5.0” x 4.8” x 1.5” (127 x 122 x38 mm)
Dimensions, Rack Units 1 slot (1.0”)
Weight Standalone 1.2 lbs (0.54 kg); rack 0.6 lbs (0.27 kg)
Construction Polycarbonate (standalone); Aluminum (rack)
Optical Fiber
Transmitter
Receiver
Video In
Data In/Out
Video Out
Data In/Out
Ordering Information
Use the Configurators below to select the options available for these products.
613P Power Supply (2 included with S732DV-PKG)
Input Power 100 - 240 VAC, 60/50 Hz
Output Voltage 13.5 VDC regulated
Output Current 1.3 A maximum
Power Consumption 18 W
AC Connection Connects to standard wall outlet
Dimensions 1.27” x 2.3” x 4.35”
Weight 0.79 lbs (0.36 kg)
Includes a standalone multimode transmitter, a standalone multimode receiver, and two power supplies.
GE
Security
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
* Optical Budget based on 62.5 µm fiber, for 50/125 µm fiber subtract 3 dB.
** Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S732DV-2006-09-2
imagination at work
imagination at work
Loading...