Interlogix S7731DVR-EFC2 Specsheet
Product Data Sheet
S7731DVR-EFC2
Digital Video, Return MPD Data Rx, SM, Can
Overview
The S7731DV -system converts analog baseband
composite video to 8-bit digital format for
transmission over one or two single-mode fibers.
The S7731DV support all major video formats.
Return data permits remote control of a PTZ at
the camera station.
Multi-Protocol Data Formats
The unique multiprotocol data design accepts all
major data formats. This allows the S7731DV to
be retained if there is a change of video control
systems. Relay/contact closure is supported from
the camera station to the control station.
Data Translation
The data functions include the unique data
translation feature, which allows one data format
to be input and a different data format to be
output. Data formats are selected during
installation and can be easily changed in the field
via rotary switch.
Superior Diagnostics
The SMARTS™ diagnostic technology provides
an extensive set of built-in diagnostic tools
including a video test pattern generator that
allows failures to be diagnosed from the monitor.
LEDs provide a visual indication of the operating
status of the equipment.
Standard Features
One-way video and data transmission over one or two
E
single-mode fibers
E
8-bit video processing
E
520 TV lines video resolution
E
Unique data translation function
E
Field-selectable data format
E
18 dB optical budget
E
Forward relay/contact closure - 1 channel
E
Supports multi-protocol data formats
E
Standalone or rack configurations
S7731DVR-EFC2
Digital Video, Return MPD Data Rx, SM, Can
Specifications
Video
Channels 1 simplex
E
Format NTSC and PAL
E
Input/Output Signal 1.0 V pk - pk composite
E
Bandwidth 6.5 MHz
E
Signal-to-Noise Ratio >55 dB
E
Video Resolution 520 TVL
E
Input/Output Impedance 75 ohms
E
Differential Phase 0.7°
E
Differential Gain 2%
E
Data
Channels 1 simplex
E
Formats RS-232 (3-wire/5-wire), TTL, RS-422, RS-485 (2-wire), Manchester, Biphase,
E
SensorNet, DTMF control
Baud Rate 250 bps to 512 kbps or 15 kHz (depending on data format)
E
Relay/Contact Closure 1 simplex channel (TX to RX)
E
Relay/Contact Rating 0.5 A at 30 VDC
E
Bit Error Rate <1.0E-9
E
Optical
Mode Single Mode
E
Optical Budget 18 dB
E
Emitter Laser
E
Wavelength 1310 nm and/or 1550 nm (depending on model)
E
Operating Distance Up to 37 mi (60 km)
E
Launch Power -15 dBm
E
Receiver Sensitivity -28 dBm
E
Gain Control Optical Automatic Gain Control (OAGC)
E
Electrical
Input Power, Standalone Units 24 VAC or 13.5 VDC regulated
E
Input Power, Rack Units 13.5 VDC regulated
E
Current Requirement 450 mA
E
Power Consumption 6 W
E
Power Factor 4 (rack units only)
E
Protection Solid-state short circuit protection
E
Power Supply Model 615P-1 (optional)
E
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
E
Maximum Humidity 95% relative, noncondensing
E
Standards
Emmissions FCC Part 15, ICES-003, AS/NZS 3548, EN55022
E
Immunity ENV50130-4
E
Safety UL 1950, CAN/CSA 22.2, NO. 950-95
E
Laser Safety 21CFR1040, EN60825-1, -2
E
Mechanical
Dimensions (LWD), Standalone Units 5.0'' x 4.8'' x 1.5'' (127 x 122 x 38 mm)
E
Dimensions, Rack Units 1 slot (1.0'')
E
Weight Standalone 1.20 lbs (0.55 kg); rack 0.6 lbs (0.27 kg)
E
Construction Steel (standalone); Aluminum (rack)
E
Ordering Information
S7731DVR-EFC2
Single-channel standalone, digital video receiver w. return
MPD-data & forward contact closure, 2 fiber - FC
As a company of innovation, UTC Fire & Security reserves the right to change product specifications without notice. For the latest
product specifications, visit UTC Fire & Security online or contact your UTC Fire & Security sales representative.
IPS-SA-S7731DVR-EFC2-2014-02-16 10:01:44
Loading...