Interlogix S7712D-EFC2 Specsheet
Singlemode
MPD Data Repeater, SM, Can
Two-Way MPD Data Repeater
The S7712D data transceivers provide two-way transmission of
multiprotocol data. A convenient rotary switch prvides selection of
the input/output data format. This link also features the unique data
translation function that allows input of one data format and output of
a different format. The S7712D provides four new data functions: (1)
It acts as a repeater to extend the operating distance of an S7711D;
(2) It provides drop-and-insert capability to a linear data system with
up to 32 nodes; (3) It can be configured as a redundant point-to-point
system; (4) It can be configured as a self-healing ring with up to 32
nodes. the S7712D links are available as standalone modules or
rack cards. The rack version is intended for use with the
515R1/517R1 rack mount card cages. The SMARTS diagnostic
technology provides an extensive array of system status LEDs. The
integrity of the data paths can be tested with a built-in data
transmission test generator. It is not necessary to connect to an
external data device.
Specifications
Data
Channels1 duplex
FormatsRS-232 (3-wire/5-wire), TTL, RS-422, RS-485
Baud Rate250 kbps to 512 kbps (depending on data format)
Bit Error Rate<1.0E-9
Optical
ModeSingle Mode
Optical Budget21 dB
EmitterLED
Wavelength1310 nm and/or 1550 nm (depending on model)
Operating Distance,
Point-to-Point
Operating Distance, Between
Nodes
Self-Healing Ring, Circuit Length
Sections
Transmitter Launch Power-14 dBm
Receiver Sensitivity-32 dBm
Gain ControlOptical Automatic Gain Control (OAGC)
Electrical
Input Power13.5 VDC regulated
Current Requirement400 mA
Power Consumption4 W
Power Factor4
ProtectionSolid-state short circuit protection
Power SupplyModel 615P (optional)
Environmental
Operating Temperature-40 to 167 °F (-40 to 75 °C)
Maximum Humidity95% relative, noncondensing
Standards
EmmissionsFCC Part 15, ICES-003, AS/NZS 3548, EN55022
ImmunityENV50204, EN61000-4-2, -3, -4, -5, -6, -11
SafetyUL 1950, CAN/CSA 22.2, NO. 950-95
S7712D-EFC2
(2-wire/4-wire), Manchester,Biphase, SensorNet, DTMF
control
Two-way data transmission over two or four
E
single-mode fibers
Supports multiprotocol data formats including RS-232,
E
TTL, RS-422, RS-485, Manchester, Biphase, and
SensorNet
Up to 43 mi (70 km) (depending on model)
Up to 15 mi (25 km) (depending on model)
1, 3, 5, 10, 15, 20, 30, 50, 70, 100, 150, 250, 350, 500 km
E
Unique data translation function
E
User-configurable data format
E
Drop and Insert Repeater function
E
Self-Healing Ring capability
E
Redundant Point-to-Point capability
E
21 dB optical budget
E
Optical AGC
E
SMARTS diagnostics
E
Standalone and rack configurations
Mechanical
Dimensions (LWD), Standalone
Units
Dimensions, Rack Units2 slots (2.0'')
WeightStandalone 1.21 lbs (0.55 kg); rack 0.55 lbs (0.25 kg)
ConstructionSteel (standalone); Aluminum (rack)
Ordering Information
S7712D-EFC2
WEBIPS-SA-S7712D-EFC2-2014-02-16 09:00:57 www.utcfssecurityproducts.co.za
5.0'' x 4.8'' x 1.5'' (127 x 122 x 38 mm)
MPD Data Repeater, SM, Can
Loading...