Interlogix S7711D-EST2, S7711D-RST2, S7711DR-EST1, S7711DR-RST1, S7711DT-EST1 Specsheet
...
e
GE Security Product Data Sheet
www.GESecurity.com
S7711D
Two-Way Multiprotocol Data
Overview
The S7711D data transceiver provides two-way transmission of
multiprotocol data over one or two single-mode fibers.
Data Translation
The S7711D also features the unique data translation function that
allows input of one data format and output of a different format. Data
formats are selected during installation and can be easily changed in
the field via rotary switch.
Superior Diagnostics
The SMARTS™ diagnostic technology provides an extensive array of
system status LEDs. The integrity of the data paths can be tested with
a built-in data transmission test generator. It is not necessary to
connect to an external data device.
Standard Features
Two-way data transmission over one or two single-mode
l
fibers
Supports multiprotocol data formats including RS-232, TTL,
l
RS-422, RS-485, Manchester, Biphase, and SensorNet
l
Unique data translation function
l
User-configurable data format
l
18 dB optical budget
l
Optical AGC
l
SMARTS™ diagnostics
l
Standalone and rack configurations
S7711D
Two-Way Multiprotocol Data
Specifications
Data
l
Channels: 1 duplex
Formats: RS-232 (3-wire/5-wire), TTL, RS-422, RS-485 (2-wire/4-wire),
l
Manchester,Biphase, SensorNet, DTMF control
l
Baud Rate: 250 kbps to 512 kbps (depending on data format)
l
Bit Error Rate: <1.0E-9
Optical
l
Mode: Single Mode
l
Optical Budget: 18 dB
l
Emitter: Laser
l
Wavelength: 1310 nm and/or 1550 nm (depending on model)
l
Operating Distance: Up to 37 mi (60 km) (depending on model)
l
Transmitter Launch Power: -14 dBm
l
Receiver Sensitivity: -32 dBm
l
Gain Control: Optical Automatic Gain Control (OAGC)
Environmental
l
Operating Temperature: -40 to 167 °F (-40 to 75 °C)
l
Maximum Humidity: 95% relative, noncondensing
Standards
l
Emmissions: FCC Part 15, ICES-003, AS/NZS 3548, EN55022
l
Immunity: ENV50204, EN61000-4-2, -3, -4, -5, -6, -11
l
Safety: UL 1950, CAN/CSA 22.2, NO. 950-95
l
Laser Safety: 21CFR1040, EN60825-1, -2
Mechanical
Dimensions (LWD), Standalone Units: 5.0" x 2.8" x 1.5" (standalone); 1
l
slot (1.0") (rack)
l
Dimensions, Rack Units: 1 slot (1.0")
l
Weight: Standalone 0.22 lbs (0.1 kg); rack 0.55 lbs (0.25 kg)
l
Construction: Plastic (standalone); Aluminum (rack)
Electrical
Input Power: 12 - 16 VAC or 13.5 VDC regulated (standalone); 13.5
l
VDC regulated (rack)
l
Current Requirement: 350 mA
l
Power Consumption: 5 W
l
Power Factor: 3
l
Protection: Solid-state short circuit protection
l
Power Supply: Model 610P (AC) or Model 613P (DC) (optional)
Related Diagram Ordering Information
GE Security
g
www.GESecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GE Security online at www.GESecurity.com or contact your GE Security sales representative.
IPS-S7711D-2004-06-16 23:22:59 Released : 30.04.2004
Mailing Address
4575 Research Way, STE 250
Corvallis, OR 97333 USA
www.GESecurity.com
Americas
800-469-1676 (US only)
tel 541-754-9133
fax 541-754-7162
Asia
tel 852-2907-8108
fax 852-2142-5063
Australia
tel +61-3-9676-0270
fax +61-3-9646-7005
Europe
tel +44-113-238-1668
fax +44-113-253-8121
Latin America
tel 305-267-4301
fax 305-267-4300
Loading...