GE
Fiber Optic
Security
Overview
8-Channel Video fiber links use revolutionary Coarse Wavelength
Division Multiplexer (CWDM) technology to provide simultaneous
long-range transmission of multiple full-frame, real-time video
signals over one multimode fiber. S708V models feature multimode
operation, while S7708V models operate over one single mode fiber.
Exceptional Performance
The eight-channel system features a bandwidth of 6.2 MHz per
channel and optical automatic gain control (OAGC). It accepts analog baseband input signals and converts them to digital format for
transmission, assuring high-quality video outputs at the receiver.
Superior Diagnostics
The SMARTS™ diagnostic technology includes a built-in video test
pattern generator on the transmitter for system setup and onscreen diagnostics to indicate insufficient optical power or an inactive video channel for each output. LEDs monitor the status of the
video and optical signals.
Video Transmitters and Receivers
Standard Features
One-way transmission of eight video channels over one fiber
•
Single and multimode models available
•
Coarse Wavelength Division Multiplexer (CWDM) technology
•
8-10-bit video processing depending on channels used
•
500 TV lines resolution
•
Video SNR >55 dB
•
6.2 MHz video bandwidth
•
Built-in test pattern generator and On-Screen Diagnostics (OSD)
•
16 dB (single mode) or 13 dB (multimode) optical budget
•
Optical AGC
•
Standalone or rack configurations
•
8-Channel Video
S708V and S7708V
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Related Diagram
8 Video In 8 Video Out
Transmitter
Receiver
Specifications
Video S708V (Multimode) S7708V (Single Mode)
Channels 8
Format NTSC, PAL, SECAM
Input/Output Signal 1.0 V p-p composite
Bandwidth 6.2 MHz
Signal-to-Noise Ratio >55 dB
Video Resolution >500 TV lines
Input/Output Impedance 75 ohms
Differential Phase <0.7°
Differential Gain <2%
Optical
Mode Multimode Single Mode
Optical Budget* 13 dB 16 dB
Emitter Laser
Wavelength 850/1300 nm or 1310/1330 nm 1310/1550 nm
Operating Distance** Up to 3.2 mi (5.2 km) 20 mi (32 km)
Gain Control Optical Automatic Gain Control (OAGC)
Transmitter Launch Power -15 dBm -12 dBm
Receiver Sensitivity -28 dBm
Electrical
Input Power, Standalone Transmitter: 24 VAC or 13.5 VDC regulated; Receiver: 13.5 VDC regulated
Input Power, Rack 13.5 VDC regulated
Current Requirement Standalone Transmitter: 700 mA; Rack units, Standalone Receiver: 1.2 A
Power Consumption Standalone Transmitter: 10 W; Rack units, Standalone Receiver: 17 W
Power Factor 10 (rack units only)
Protection Solid-state short circuit protection
Optional Power Supply Model 613P
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD),
Standalone Units
Dimensions, Rack Units 2 slots (2.0”)
Weight, Standalone Units 1.8 lbs (0.82 kg)
Weight, Rack Units 1.24 lbs (0.56 kg)
Construction Standalone Units: Steel; Rack Units: Aluminum
(Depending on model used)
(Depending on model used)
5.0” x 4.8” x 2.2” (127 x 122 x 56 mm)
Optical Fiber
Ordering Information
Use the Configurators below to select the options available for these products.
* Optical Budget based on 62.5 µm fiber, for 50/125 µm fiber subtract 3 dB.
** Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S708V-2006-09-2
imagination at work