Interlogix S7707VT-RFC Specsheet
Fiber Optic
Video Transmitters and Receivers
Overview
4-Channel Video fiber links represent a technological breakthrough
in the simultaneous transmission of four full-frame, real-time video
signals (color or monochrome). S707V models feature multimode
operation, while S7707V models operate over one single mode fiber.
Exceptional Performance
The four-channel system features a 6.2 MHz-per-channel bandwidth and optical automatic gain control (OAGC). It accepts analog
baseband inputs and converts them to digital format for transmission, assuring high-quality video outputs at the receiver. The system
is compatible with with all major video formats.
Superior Diagnostics
The SMARTS™ diagnostic technology includes a built-in video test
pattern generator on the transmitter for system setup and onscreen diagnostics to indicate insufficient optical power or an inactive video channel for each output. LEDs monitor the status of the
video and optical signals.
Standard Features
One-way transmission of four video channels over one fiber
•
Single and multimode models available
•
Digital multiplexing technology
•
8-10-bit video processing depending on channels used
•
500 TV lines resolution
•
Video SNR >55 dB
•
6.2 MHz video bandwidth
•
Built-in test pattern generator and On-Screen Diagnostics (OSD)
•
16 dB (single mode) or 13 dB (multimode) optical budget
•
Supports all major video formats
•
Optical AGC
•
Standalone or rack configurations
•
4-Channel Video
S707V and S7707V
Related Diagram
4 Video In 4 Video Out
Transmitter
Optical Fiber
Receiver
Ordering Information
Use the Configurators below to select
the options available for these products.
Specifications
Video S707V (Multimode) S7707V (Single Mode)
Channels 4
Format All major formats
Input/Output Signal 1.0 V p-p composite
Bandwidth 6.2 MHz
Signal-to-Noise Ratio >55 dB
Video Resolution >500 TV lines
Input/Output Impedance 75 ohms
Differential Phase <0.7°
Differential Gain <2%
Optical
Mode Multimode Single Mode
Optical Budget* 13 dB 16 dB
Emitter Laser
Wavelength 1300 nm 1310 nm or 1550 nm
(Depending on model)
Operating Distance** 2.5 mi (4.0 km) 33 mi (53 km)
(Depending on model)
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power, Standalone
Units
Input Power, Rack Units 13.5 VDC regulated
Current Requirement Standalone Transmitter: 350 mA
Power Consumption Standalone Transmitter: 5 W; Rack units and Standalone Receiver: 9 W
Power Factor 5 (rack units only)
Protection Solid-state short circuit protection
Optional Power Supply Model 613P
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD),
Standalone Units
Dimensions, Rack Units 1 slot (1.0”)
Weight, Standalone Units 1.3 lbs (0.59 kg)
Weight, Rack Units 0.64 lbs (0.29 kg)
Construction Standalone Units: Polycarbonate
Transmitter: 24 VAC or 13.5 VDC regulated
Receiver: 13.5 VDC regulated
Rack units and Standalone Receiver: 600 mA
5.0” x 4.8” x 1.5”
127 x 122 x 38 mm
Rack Units: Aluminum
* Optical Budget based on 62.5 µm fiber, for 50/125 µm fiber subtract 3 dB.
Loading...