Interlogix S7707VR-EFC, S7707VR-RFC, S7707VR-RST, S7707VT-EFC, S7707VT-EST Specsheet
GE
Fiber Optic
Security
Overview
4-Channel Video fiber links represent a technological breakthrough
in the simultaneous transmission of four full-frame, real-time video
signals (color or monochrome). S707V models feature multimode
operation, while S7707V models operate over one single mode fiber.
Exceptional Performance
The four-channel system features a 6.2 MHz-per-channel bandwidth and optical automatic gain control (OAGC). It accepts analog
baseband inputs and converts them to digital format for transmission, assuring high-quality video outputs at the receiver. The system
is compatible with with all major video formats.
Superior Diagnostics
The SMARTS™ diagnostic technology includes a built-in video test
pattern generator on the transmitter for system setup and onscreen diagnostics to indicate insufficient optical power or an inactive video channel for each output. LEDs monitor the status of the
video and optical signals.
Video Transmitters and Receivers
Standard Features
One-way transmission of four video channels over one fiber
•
Single and multimode models available
•
Digital multiplexing technology
•
8-10-bit video processing depending on channels used
•
500 TV lines resolution
•
Video SNR >55 dB
•
6.2 MHz video bandwidth
•
Built-in test pattern generator and On-Screen Diagnostics (OSD)
•
16 dB (single mode) or 13 dB (multimode) optical budget
•
Supports all major video formats
•
Optical AGC
•
Standalone or rack configurations
•
4-Channel Video
S707V and S7707V
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9676-1300
F 61-3-9646-7005
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Related Diagram
4 Video In 4 Video Out
Transmitter
Optical Fiber
Ordering Information
Use the Configurators below to select
the options available for these products.
Receiver
Specifications
Video S707V (Multimode) S7707V (Single Mode)
Channels 4
Format All major formats
Input/Output Signal 1.0 V p-p composite
Bandwidth 6.2 MHz
Signal-to-Noise Ratio >55 dB
Video Resolution >500 TV lines
Input/Output Impedance 75 ohms
Differential Phase <0.7°
Differential Gain <2%
Optical
Mode Multimode Single Mode
Optical Budget* 13 dB 16 dB
Emitter Laser
Wavelength 1300 nm 1310 nm or 1550 nm
(Depending on model)
Operating Distance** 2.5 mi (4.0 km) 33 mi (53 km)
(Depending on model)
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power, Standalone
Units
Input Power, Rack Units 13.5 VDC regulated
Current Requirement Standalone Transmitter: 350 mA
Power Consumption Standalone Transmitter: 5 W; Rack units and Standalone Receiver: 9 W
Power Factor 5 (rack units only)
Protection Solid-state short circuit protection
Optional Power Supply Model 613P
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD),
Standalone Units
Dimensions, Rack Units 1 slot (1.0”)
Weight, Standalone Units 1.3 lbs (0.59 kg)
Weight, Rack Units 0.64 lbs (0.29 kg)
Construction Standalone Units: Polycarbonate
Transmitter: 24 VAC or 13.5 VDC regulated
Receiver: 13.5 VDC regulated
Rack units and Standalone Receiver: 600 mA
5.0” x 4.8” x 1.5”
127 x 122 x 38 mm
Rack Units: Aluminum
* Optical Budget based on 62.5 µm fiber, for 50/125 µm fiber subtract 3 dB.
** Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S707V-2006-09-2
imagination at work
Loading...