Interlogix S7705VT-RST, S7705VT-EFC, S7705VT-EST, S7705VR-RST, S7705VR-EST Specsheet
...
GE
Fiber Optic
Security
Overview
Broadcast-Grade Video fiber links accept analog baseband video,
convert it to digital form, and transmit it as a 10-bit digital signal.
Digital transmission of video with a signal-to-noise ratio of >60 dB
assures noise-free video at the receiver. This equipment supports
all major video formats. Resolution of greater than 560 TV lines
guarantees faithful reproduction of high-resolution closed-circuit
video images. S705V models feature multimode operation, while
S7705V models operate over one single mode fiber.
Exceptional Performance
The S705V and S7705V meet or exceed the requirements of the
EIA/TIA 250C Medium Haul Standard.
Superior Diagnostics
The SMARTS™ diagnostic technology provides built-in diagnostic
tools including LEDs that monitor the operating status of the video
and optical signals.
Video Transmitters and Receivers
Standard Features
One-way transmission of composite video
•
Single and multimode models available
•
Meets or exceeds EIA-250C Medium-Haul standard
•
10-bit video processing
•
>560 TV lines resolution
•
Video SNR >60 dB
•
7 MHz video bandwidth
•
Optical AGC
•
13 dB optical budget (multimode), 18dB (single mode)
•
Operating distance up to 37 miles (60 km), depending on the
•
model
Standalone or rack configurations
•
Broadcast-Grade
Video
S705V and S7705V
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9676-1300
F 61-3-9646-7005
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Related Diagram
Video In Video Out
Transmitter
Receiver
Specifications
Video S705V (Multimode) S7705V (Single Mode)
Channels 1
Format NTSC and PAL
Input/Output Signal 1.0 V p-p composite
Bandwidth 7 MHz
Signal-to-Noise Ratio >60 dB
Video Resolution >560 TV lines
Input/Output Impedance 75 ohms
Differential Phase <0.7°
Differential Gain <2%
Optical
Mode Multimode Single Mode
Optical Budget∗ 13 dB Budget: 18 dB
Emitter Laser
Wavelength 1300 nm 1310 or 1550 nm
Operating Distance∗∗ 2.5 mi (4.0 km) Up to 37 mi (60 km)
(Depending on model)
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power, Standalone
Units
Input Power, Rack Units 13.5 VDC regulated
Current Requirement 400 mA
Power Consumption 6 W
Power Factor 4 (rack units only)
Protection Solid-state short circuit protection
Optional Power Supply Model 613P
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD),
Standalone Units
Dimensions, Rack Units 1 slot (1.0”)
Weight, Standalone Units Transmitter: 1.21 lbs (0.55 kg); Receiver: 1.40 lbs (0.64 kg)
Weight, Rack Units 0.55 lbs (0.25 kg)
Construction Standalone transmitter and receiver: Polycarbonate
Transmitter: 24 VAC or 13.5 VDC regulated
Receiver: 13.5 VDC regulated
Transmitter: 5.0” x 4.8” x 1.5” (127 x 122 x 38 mm)
Receiver: 9.31” x 6.33” x 1.15” (236 x 161 x 29 mm)
Rack units: Aluminum
Optical Fiber
Ordering Information
Use the Configurators below to select the options available for these products.
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S705V-2006-09-2
imagination at work
Loading...