Interlogix S7704VT-RST, S7704VR-RST Specsheet
GE
Fiber Optic
Security
Overview
4-Channel Video Multiplexers transmit four channels of full-frame,
real-time video over a single fiber. They accept monochrome and
color signals in NTSC and PAL formats. The multiplexers consist of
a four-channel transmitter and receiver, with both units available
in standalone and rack configurations. S704V models feature
multimode operation, while S7704V models operate over one single
mode fiber.
Exceptional Performance
Full-frame, real-time video transmission delivers all the video
captured by the camera. A bandwidth of 8 MHz enable the
multiplexers to transmit extremely clear, high-resolution images. FM
modulation assures that the image quality remains high over the
full operating distance.
Video Transmitters and Receivers
Standard Features
One-way transmission of four real-time, full frame video
•
channels over one fiber
Single and multimode models available
•
Supports all major video formats
•
640 TV lines resolution
•
60 dB Video SNR
•
8 MHz video bandwidth
•
Optical AGC
•
13 dB optical budget
•
Operating distance up to 20 miles (32 km), depending on the
•
model
Standalone or rack configurations
•
Superior Diagnostics
The SMARTS™ diagnostic technology provides built-in diagnostic
tools including LEDs that monitor the operating status of the video
and optical signals.
4-Channel Video
Multiplexer
S704V and S7704V
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9676-1300
F 61-3-9646-7005
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Related Diagram
4 Video In 4 Video Out
Transmitter
Receiver
Specifications
Video S704V (Multimode) S7704V (Single Mode)
Channels 4
Format NTSC, PAL, SECAM, EIA, CCIR
Input/Output Signal 1.0 V p-p composite
Bandwidth 8 MHz
Signal-to-Noise Ratio 60 dB
Video Resolution 640 TV lines
Input/Output Impedance 75 ohms
Differential Phase 4°
Differential Gain 7%
Optical
Mode Multimode Single Mode
Optical Budget∗ 13 dB
Emitter Laser
Wavelength 850 and 1300 nm 1310 and 1550 nm
Operating Distance∗∗ 3.2 mi (5.2 km) 20 mi (32 km)
Modulation Type Frequency modulation
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power, Standalone
Units
Input Power, Rack Units 13.5 VDC regulated
Current Requirement 350 mA
Power Consumption 5 W
Power Factor 3 (rack units only)
Protection Solid-state short circuit protection
Optional Power Supply Model 610P (AC) or Model 613P (DC)
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD),
Standalone Units
Dimensions, Rack Units 2 slots (2.0”) 2 slots (2.0”)
Weight Standalone transmitter 2.8 lbs (1.27 kg)
Construction Steel (standalone Tx); Aluminum (rack & standalone Rx)
12 - 14 VAC or 13.5 VDC regulated (transmitter)
13.5 VDC regulated (receiver)
Transmitter: 5.0” x 4.8” x 2.2” (127 x 122 x 56 mm)
Receiver: 9.3” x 6.33” x 2.15” ( 236 x 161 x 55 mm)
Standalone receiver: 1.86 lbs (0.84 kg)
Rack: 1.86 lbs (0.84 kg)
Optical Fiber
Ordering Information
Use the Configurators below to select the options available for these products.
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S704V-2006-09-2
imagination at work
Loading...