Interlogix S7703VT-RST, S7703VR-RST Specsheet
e
GE Security Product Data Sheet
www.GESecurity.com
S7703V
2-Channel Video Multiplexer
Overview
The S7703V Two-Channel Video System transmits two channels of
full-frame, real-time video over a single fiber. It accepts monochrome
and color signals in NTSC and PAL formats. The system consists of a
two-channel transmitter and receiver, with both units available in
standalone and rack configurations.
Exceptional Performance
Full-frame, real-time video transmission delivers all the video captured
by the camera. A bandwidth of 8 MHz enables the S7703V to transmit
extremely clear, high-resolution images. FM modulation assures that
the image quality remains high over the full operating distance.
Superior Diagnostics
The SMARTS™ diagnostic technology provides built-in diagnostic
tools including LEDs that monitor the operating status of the video
and optical signals.
Standard Features
One-way transmission of two real-time, full frame video
l
channels over one single-mode fiber
l
Supports all major video formats
l
640 TV lines resolution
l
60 dB Video SNR
l
8 MHz video bandwidth
l
Optical AGC
l
13 dB optical budget
l
Operating distance up to 27 miles (43 km)
l
Standalone or rack configurations
S7703V
2-Channel Video Multiplexer
Specifications
Video
l
Channels: 2
l
Format: NTSC, PAL, SECAM, EIA, CCIR
l
Input/Output Signal: 1.0 V p-p composite
l
Bandwidth: 8 MHz
l
Signal-to-Noise Ratio: 60 dB
l
Video Resolution: 640 TV lines
l
Input/Output Impedance: 75 ohms
l
Differential Phase: 3°
l
Differential Gain: 3%
Optical
l
Mode: Single Mode
l
Optical Budget: 13 dB
l
Emitter: Laser
l
Wavelength: 1310 nm or 1550 nm (depending on model)
l
Operating Distance: Up to 27 mi (43 km) (depending on model)
l
Modulation Type: Frequency modulation
l
Gain Control: Optical Automatic Gain Control (OAGC)
Environmental
l
Operating Temperature: -40 to 167 °F (-40 to 75 °C)
l
Maximum Humidity: 95% relative, noncondensing
Standards
l
Emmissions: FCC Part 15, ICES-003, AS/NZS 3548, EN55022
l
Immunity: ENV50204, EN61000-4-2, -3, -4, -5, -6, -11
l
Safety: UL 1950, CAN/CSA 22.2, NO. 950-95, EN60825
Mechanical
Dimensions (HWD): 5.0" x 4.8" x 1.5" (standalone transmitter); 9.3" x
l
6.33" x 1.15" (standalone receiver) ; 1 slot (1.0") (rack)
Weight: Standalone TX 1.21 lbs (0.55 kg); Standalone RX 1.36 lbs (0.61
l
kg); rack 0.75 lbs (0.34 kg)
l
Construction: Steel (standalone transmitter); Aluminum (rack)
Electrical
Input Power, Standalone Units: 12 - 14 VAC or 13.5 VDC regulated
l
(transmitter); 13.5 VDC regulated (receiver)
l
Input Power, Rack Units: 13.5 VDC regulated
l
Current Requirement: 200 mA
l
Power Consumption: 3 W
l
Power Factor: 2 (rack units only)
l
Protection: Solid-state short circuit protection
l
Optional Power Supply: Model 610P (AC) or Model 613P (DC)
Related Diagram Ordering Information
GE Security
g
www.GESecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GE Security online at www.GESecurity.com or contact your GE Security sales representative.
IPS-S7703V-2004-06-17 17:30:02 Released : 07.05.2004
Mailing Address
4575 Research Way, STE 250
Corvallis, OR 97333 USA
www.GESecurity.com
Americas
800-469-1676 (US only)
tel 541-754-9133
fax 541-754-7162
Asia
tel 852-2907-8108
fax 852-2142-5063
Australia
tel +61-3-9676-0270
fax +61-3-9646-7005
Europe
tel +44-113-238-1668
fax +44-113-253-8121
Latin America
tel 305-267-4301
fax 305-267-4300
Loading...