Interlogix S7703VT-EST, S7703VR-EST, S7703VR-RFC, S7703VT-EFC Specsheet
GE
Fiber Optic
Security
Overview
2-Channel Video Multiplexers transmit two channels of full-frame,
real-time video over a single fiber. They accept monochrome and
color signals in NTSC and PAL formats. The multiplexers consist
of a two-channel transmitter and receiver, with both units available in standalone and rack configurations. S703V models feature
multimode operation, while S7703V models operate over one single
mode fiber.
Exceptional Performance
Full-frame, real-time video transmission delivers all the video captured by the camera. A bandwidth of 8 MHz enable the multiplexers
to transmit extremely clear, high-resolution images. FM modulation
assures that the image quality remains high over the full operating
distance.
Video Transmitters and Receivers
Standard Features
One-way transmission of two real-time, full frame video channels
•
over one fiber.
Single and multimode models available
•
Supports all major video formats
•
640 TV lines resolution
•
60 dB Video SNR
•
8 MHz video bandwidth
•
Optical AGC
•
13 dB optical budget
•
Operating distance up to 27 miles (43 km), depending on the
•
model
Standalone or rack configurations
•
Superior Diagnostics
The SMARTS™ diagnostic technology provides built-in diagnostic
tools including LEDs that monitor the operating status of the video
and optical signals.
2-Channel Video
Multiplexer
S703V and S7703V
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9676-1300
F 61-3-9646-7005
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Related Diagram
2 Video In 2 Video Out
Transmitter
Optical Fiber
Receiver
Specifications
Video S703V (Multimode) S7703V (Single Mode)
Channels 2
Format NTSC, PAL, SECAM, EIA, CCIR
Input/Output Signal 1.0 V p-p composite
Bandwidth 8 MHz
Signal-to-Noise Ratio 60 dB
Video Resolution 640 TV lines
Input/Output Impedance 75 ohms
Differential Phase 3°
Differential Gain 3%
Optical
Mode Multimode Single Mode
Optical Budget∗ 13 dB
Emitter Laser
Wavelength 850 nm or 1300 nm 1310 nm or 1550 nm
(Depending on model)
Operating Distance∗∗ Up to 11 mi (18 km) Up to 27 mi (43 km)
(Depending on model)
Modulation Type Frequency modulation
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power,
Standalone Units
Input Power, Rack Units 13.5 VDC regulated
Current Requirement 200 mA
Power Consumption 3 W
Power Factor 2 (rack units only)
Protection Solid-state short circuit protection
Optional Power Supply Model 613P
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (HWD) Standalone Transmitter: 5.0” x 4.8” x 1.5” (127 x 122 x 38 mm)
Standalone Receiver: 9.3” x 6.33” x 1.15” (236 x 161 x 29 mm)
Weight Standalone Transmitter: 1.21 lbs (0.55 kg)
Construction Polycarbonate (standalone Tx); Aluminum (rack & standalone Rx)
Transmitter: 13.5 VDC regulated
Receiver: 13.5 VDC regulated
Rack: 1 slot (1.0”)
Standalone Receiver: 1.36 lbs (0.61 kg)
Rack: 0.75 lbs (0.34 kg)
Ordering Information
Use the Configurators below to select the
options available for these products.
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S703V-2006-09-2
imagination at work
Loading...