Interlogix S732DVR-EST2 Specsheet
S732DVR-EST2
Digital Video, 2-Way MPD Data Rx, MM, Can
Overview
S732DV and S7732DV fiber links provide transmission of one-way
video and two-way multiprotocol data over one or two optical fibers.
S732DV models feature multimode operation, while S7732DV models
operate over single mode fibers. The links can be supplied as either a
standalone module or as a rack card that can be installed in a
standard 19-inch card cage. A complete system consists of a
transmitter and a receiver. S732DV-PKG kits include a standalone
multimode transmitter, a standalone multimode receiver, and two
power supplies.
Video Processing
The units utilize 8-bit video processing of the video component along
with a signal-to-noise ratio >55 dB that assures clean, noisefree video
at the receiver.
Data Translation
The data functions include the unique data translation feature, which
allows one data format to be input and a different data format to be
output. Data formats are selected during installation and can be easily
changed in the field via rotary switch.
Multoprotocol Data Formats
The unique multiprotocol data design accepts all major data formats.
This allows the S(7)732DV-PKG to be retained if there is a change of
video control systems.
Superior Diagnostics
The SMARTS™ diagnostic technology provides an extensive set of
built-in diagnostic tools including a video test pattern generator that
allows failures to be diagnosed from the monitor. LEDs provide a
visual indication of the operating status of the equipment.
CWDM Technology
Certain models of the S732DV series incorporate Coarse Wavelength
Division Multiplexer (CWDM) technology for maximum distance
capability using a single multimode fiber.
Details
One-way video, two-way multiprotocol data transmission over one or two
multimode fibers
Single and multimode models available
8-bit video processing
520 TV lines video resolution
Unique data translation function
Field-selectable data format
13 dB optical budget (20 dB on CWDM models), or 18 db on singlemode models
Supports all major data formats
Standalone or rack configurations
Standalone package includes a multimode transmitter, a multimode
receiver, and two power supplies
S732DVR-EST2
Digital Video, 2-Way MPD Data Rx, MM, Can
Technical specifications
Video
Video channels 1
Channels 1 simplex
Format NTSC and PAL
Input/Output Signal 1.0 V pp composite
Bandwidth 6.5 MHz
Signal-to-Noise Ratio >55 dB
Video Resolution 520 TVL
Input/Output Impedance 75 ohms
Differential Phase <3°
Differential Gain <3%
Data
Data channels 1
Channels 1 duplex
Formats RS-232 (3-wire/5-wire), TTL, RS-422, RS-485
(2-wire/4-wire), Manchester, Biphase, SensorNet,
DTMF control
Baud Rate 250 kbps to 512 kbps (depending on data
format)
Bit Error Rate <1.0E-9
Optical
Fiber type Multi Mode (MM)
No. of fibers 2
Fiber connector type ST
Mode Multimode or Single Mode
Optical Budget Multimode 13 dB (20 dB on CWDM models);
Single Mode 18 dB
Emitter Multimode LED; Single Mode Laser
Wavelength Multimode 850 nm or 1300 nm; 1310 nm and
1330 nm on CWDM models; Single Mode 1310
nm or 1550 nm (Depending on model)
Operating Distance Multimode Up to 4.0 mi (6.5 km) (depending on
model) (RST1L > (7.5 mi 12 km); Single Mode 37
mi (60 km) (Depending on model)
Launch Power Multimode -15 dBm; Single Mode -10 dBm
Receiver Sensitivity -28 dBm
Gain Control Optical Automatic Gain Control (OAGC)
Physical
Form factor Stand Alone
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Standards
Emmissions FCC Part 15, ICES-003, AS/NZS 3548, EN55022
Immunity ENV50204, EN61000-4-2, -3, -4, -5, -6, -11
Safety UL 1950, CAN/CSA 22.2, NO. 950-95
Mechanical
Dimensions (LWD),
Standalone Units
Dimensions, Rack Units 1 slot (1.0")
Weight Standalone 1.2 lbs (0.54 kg); rack 0.6 lbs (0.27
Construction Polycarbonate (standalone); Aluminum (rack)
5.0" x 4.8" x 1.5" (127 x 122 x38 mm)
kg)
Powered by TCPDF (www.tcpdf.org)
General
Transmit/receive Receiver
Electrical
Input Power, Standalone
Units
Input Power, Rack Units 13.5 VDC regulated
Current Requirement 450 mA
Power Consumption 6 W
Power Factor 4 (rack units only)
Protection: Solid-state short circuit protection
Power Supply Model 615P-1/EU (Order Code: 188-3178/EU) or
As a company of innovation, UTC Fire & Security reserves the right to change product specifications
without notice. For the latest product specifications, visit UTC Fire & Security online or contact your
sales representative.
30 April 2019 - 10:15
24 VAC or 13.5 VDC regulated
615P-1/UK (Order Code: 188-3178/UK)
Loading...