Interlogix S731DVR-EST1 Specsheet
GE
GE
Fiber Optic
Security
Security
Video/Data Transmitters and Receivers
Overview
S731DV and S7731DV video and reverse data links provide digital transmission of video and return multiprotocol data. The link
converts analog baseband composite video to 8-bit digital format
for transmission over one or two fibers. The links support all major
video formats. Return data permits remote control of a PTZ at the
camera station. S731DV models feature multimode operation, while
S7731DV models operate over single mode fibers. S731DV-PKG kits
include a standalone multimode transmitter, a standalone multimode receiver, and two power supplies.
Multiprotocol Data Formats
The unique multiprotocol data design accepts all major data formats. This allows the S731DV and S7731DV to be retained if there
is a change of video control systems. Relay/contact closure is supported from the camera station to the control station.
Data Translation
The data functions include the unique data translation feature,
which allows one data format to be input and a different data format to be output. Data formats are selected during installation and
can be easily changed in the field via rotary switch.
Superior Diagnostics
The SMARTS™ diagnostic technology provides an extensive set of
built-in diagnostic tools including a video test pattern generator
that allows failures to be diagnosed from the monitor. LEDs provide
a visual indication of the operating status of the equipment.
Standard Features
•
One-way video and reverse multiprotocol data transmission
over one or two fibers
•
Single and multimode models available
•
8-bit video processing
•
520 TV lines video resolution
•
Unique data translation function
•
Field-selectable data format
•
18 dB (single mode) or 13 dB (multimode) optical budget
•
Forward relay/contact closure - 1 channel
•
Supports all major data formats
•
Standalone or rack configurations
•
Standalone package includes a multimode transmitter, a multimode receiver, and two power supplies
Single-Channel
Video and Reverse
Multiprotocol Data
S731DV, S7731DV and S731DV-PKG
S731DV-PKG
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
613P Power Supply (2 included with S731DV-PKG)
Input Power 100 - 240 VAC, 60/50 Hz
Output Voltage 13.5 VDC regulated
Output Current 1.3 A maximum
Power Consumption 18 W
AC Connection Connectsto standard wall outlet
Dimensions 1.27” x 2.3” x 4.35”
Weight 0.79 lbs (0.36 kg)
Related Diagram
Video In
Data Out
Contact In
Transmitter
Video Out
Receiver
Data In
Contact Out
Specifications
Video S731DV (Multimode) S7731DV (Single Mode)
Channels 1 simplex
Format NTSC and PAL
Input/Output Signal 1.0 V pk - pk composite
Bandwidth 6.5 MHz
Signal-to-Noise Ratio >55 dB
Video Resolution 520 TV lines
Input/Output Impedance 75 ohms
Differential Phase <3°
Differential Gain 3%
Data
Channels 1 simplex (RX to TX)
Formats RS-232 (3-wire/5-wire), TTL, RS-422, RS-485 (2-wire), Manchester,
Baud Rate 250 kbps to 512 kbps (depending on data format)
Relay/Contact Closure 1 simplex channel (TX to RX)
Relay/Contact Rating 0.5 A at 30 VDC 0.5 A at 30 VDC
Bit Error Rate <1.0E-9
Optical
Mode Multimode Single Mode
Optical Budget∗ 13 dB 18 dB
Emitter LED Laser
Wavelength 850 nm and/or 1300 nm
(depending on model)
Operating Distance∗∗ Up to 3.2 mi (5.2 km)
(depending on model)
Launch Power -15 dBm -10 dBm
Receiver Sensitivity -28 dBm
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power, Standalone Units 24 VAC or 13.5 VDC regulated
Input Power, Rack Units 13.5 VDC regulated
Current Requirement 450 mA
Power Consumption 6 W
Power Factor 4 (rack units only)
Protection Solid-state short circuit protection
Power Supply Model 613P (optional)
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD), Standalone
Units
Dimensions, Rack Units 1 slot (1.0”)
Weight Standalone 1.20 lbs (0.55 kg); Rack 0.6 lbs (0.27 kg)
Construction Polycarbonate (standalone); Aluminum (rack)
Biphase, SensorNet
1310 nm and/or 1550 nm
(depending on model)
Up to 37 mi (60 km)
5.0” x 4.8” x 1.5” (127 x 122 x 38 mm)
Optical Fiber
Ordering Information
Use the Configurators below to select the options available for these products.
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S731DV-2006-09-2
Includes a standalone multimode transmitter, a stand-
imagination at work
imagination at work
imagination at work
alone multimode receiver, and two power supplies.
Loading...