Interlogix S711F2FT-RST1 Specsheet
GE
Fiber Optic
Security
Overview
The Two-Way F2F Data links are specifically designed to support
two-way transmission of Casi F/2F data and one relay/contact
closure channel. S711F2F models feature multimode operation,
while S7711F2F models operate over single mode fibers.
Rack Card Features
The S711F2F models also feature hot-swappable rack cards and
solid-state short circuit protection
Superior Diagnostics
The SMARTS™ diagnostic technology provides an extensive array of
system status LEDs that monitor the status of the data and optical
signals.
Data Transmitters and Receivers
Standard Features
Two-way data transmission
•
Single and multimode models available
•
Supports GE Security supervised F2F data format
•
Includes one bidirectional relay/contact closure channel
•
Standard 18 dB optical budget; higher budgets available
•
Optical AGC
•
SMARTS™ diagnostics
•
Rack only configuration
•
Two-Way
F2F Data
S711F2F and S7711F2F
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-12999
Europe
T
32-2-719-9847
F
32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Related Diagram
Specifications
Data S711F2F (Multimode) S7711F2F (Single Mode)
Channels 1 duplex
Format GE Security supervised F/2F
Bit Error Rate <1.0E-9
Relay/Contact Closure 1 duplex channel
Relay/Contact Rating 0.5 A at 30 VDC
Optical
Mode Multimode Single Mode
Optical Budget 18 dB
Emitter LED Laser
Wavelength
Operating Distance Depends on data limitations (Contact Casi for operating distance specifications)
Transmitter Launch
Power
Receiver Sensitivity -32 dBm -33 dBm
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power 13.5 VDC regulated
Current Requirement 350 mA
Power Consumption 5 W
Power Factor 3
Protection Solid-state short circuit protection
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions 1 slot (1.0”)
Weight 0.55 lbs (0.25 kg)
Construction Aluminum
∗
850 nm and/or 1300 nm
(depending on model)
∗∗
-14 dBm -15 dBm
1310 nm and/or 1550 nm
Casi F2F
Data In/Out
Transceiver
Optical Fiber
Transceiver
Data In/Out
Casi F2F
Ordering Information
Use the Configurators below to select the options available for these products.
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S711F2F-2006-09-2
imagination at work
Loading...