Interlogix S711DR-EST1 Specsheet

GE
Fiber Optic
Security
Overview
The Enhanced Two-Way Multiprotocol data transceivers provide two-way transmission of multiprotocol data over one or two fibers. S711D models feature multimode operation, while S7711D models operate over single mode fiber.
Data Translation
This equipment also features the unique data translation function that allows input of one data format and output of a different format. Data formats are selected during installation and can be easily changed in the field via rotary switch.
Superior Diagnostics
The SMARTS™ diagnostic technology provides an extensive array of system status LEDs. The integrity of the data paths can be tested with a built-in data transmission test generator. It is not necessary to connect to an external data device.
Data Transmitters and Receivers
Standard Features
Two-way data transmission over one or two fibers
Single and multimode models available
Supports multiprotocol data formats including RS-232, TTL, RS-422, RS-485, Manchester, Biphase, and SensorNet
Unique data translation function
User-configurable data format
18 dB optical budget
Optical AGC
SMARTS™ diagnostics
Standalone and rack configurations
Enhanced Two-Way Multiprotocol Data
GE
Security
U.S. T (561) 998-6100 T 888-GE-SECURITY 888-(437-3287) F 561 998 6224
Canada T 519 376 2430 F 519 376 7258
Asia T 852-2907-8108 F 852-2142-5063
Australia T 61-3-9239-1200 F 61-3-9239-1299
Europe T 44-113-238-1668 F 44-113-253-8121
Latin America T 305-593-4301 F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company All Rights Reserved
Related Diagram
Data In/Out Data In/Out
Transceiver
Transceiver
Specifications
Data S711D (Multimode) S7711D (Single Mode)
Channels 1 duplex Formats RS-232 (3-wire/5-wire), TTL, RS-422, RS-485 (2-wire/4-wire),
Baud Rate 250 kbps to 51 2 kbps (depending on data format) Bit Error Rate <1.0E-9
Optical
Mode Multimode Single Mode Optical Budget* 18 dB Emitter LED or Laser Laser Wavelength 850 nm and/or 1300 nm
(depending on model)
Operating Distance** Up to 15 mi (25 km)
(depending on model) Transmitter Launch Power -10 dBm Receiver Sensitivity -28 dBm Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power 13.5 VDC regulated Current Requirement 350 mA Power Consumption 5 W Power Factor 3 Protection Solid-state short circuit protection Optional Power Supply Model 613P
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C) Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD, Standalone Units)
Dimensions, Rack Units 1 slot (1.0”) Weight Standalone 0.22 lbs (0.1 kg); Rack 0.55 lbs (0.25 kg) Construction Polycarbonate (standalone); Aluminum (rack)
Manchester, Biphase, SensorNet
1310 nm and/or 1550 nm
(depending on model)
Up to 37 mi (60 km)
(depending on model)
5.0” x 2.8” x 1.5” (127 x 71 x 38 mm)
Optical Fiber
Ordering Information
Use the Configurators below to select the options available for these products.
* Optical Budget based on 62.5 µm fiber, for 50/125 µm fiber subtract 3 dB. ** Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative. S711D-2006-09-2
imagination at work
Loading...