Interlogix S710D-EST2 Specsheet
GE
Fiber Optic
Security
Overview
The S710D data transceiver provides two-way transmission of
multiprotocol data over two multimode fibers.
Data Translation
The S710D also features the unique data translation function that
allows input of one data format and output of a different format.
Data formats are selected during installation and can be easily
changed in the field via rotary switch.
Superior Diagnostics
The SMARTS™ diagnostic technology provides an extensive array
of system status LEDs. The integrity of the data paths can be tested
with a built-in data transmission test generator. It is not necessary
to connect to an external data device.
Data Transmitters and Receivers
Standard Features
•
Two-way data transmission over two multimode fibers Supports
multiprotocol data formats including RS-232, TTL, RS-422,
RS-485, Manchester, Biphase, and SensorNet
•
Unique data translation function
•
User-configurable data format
•
13 dB optical budget
•
Optical AGC
•
SMARTS™ diagnostics
•
Standalone and rack configurations
Two-Way
Multiprotocol
Data
S710D
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Specifications
Data
Channels 1 duplex
Formats RS-232 (3-wire/5-wire), TTL, RS-422, RS-485 (2-wire/4-wire), Manchester,
Baud Rate 250 kbps to 512 kbps (depending on data format)
Bit Error Rate <1.0E-9
Optical
Mode Multimode
Optical Budget* 13 dB
Emitter LED
Wavelength 850 nm
Operating Distance** 3.2 mi (5.2 km)
Gain Control Optical Automatic Gain Control (OAGC)
Transmitter Launch Power -17 dBm
Receiver Sensitivity -30 dBm
Electrical
Input Power 13.5 VDC regulated
Current Requirement 220 mA
Power Consumption 3.5 W
Power Factor 2
Protection Solid-state short circuit protection
Optional Power Supply Model 613P
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD),
Standalone Units
Dimensions, Rack Units 1 slot (1.0”)
Weight Standalone 0.22 lbs (0.1 kg); Rack 0.55 lbs (0.25 kg)
Construction Polycarbonate (standalone); Aluminum (rack)
Biphase, SensorNet
5.0” x 2.8” x 1.5” (127 x 71 x 38 mm)
Related Diagram
Ordering Information
Use the Configurator below to select the options available for this product.
* Optical Budget based on 62.5 µm fiber, for 50/125 µm fiber subtract 3 dB.
** Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S710D-2006-09-2
imagination at work
Loading...