Product Data Sheet
S708VT-RST
8-Ch Digital Video Tx, MM, Rack
Overview
The S708V-series video transmitters are
designed to transmit a four channel of full-frame,
real-time baseband composite video up to 11
miles (18 km) over one multimode fiber. It accepts
monochrome and color signals in NTSC and PAL
formats. Full-frame, real-time video transmission
delivers all the video captured by the camera.
Exceptional Performance
A bandwidth of 6.2 MHz enables the S708V to
transmit extremely clear, high-resolution images.
FM modulation assures that the image quality
remains high over the full operating distance. The
system consists of a transmitter and receiver. The
standalone transmitter has been designed
especially for easy installation. The rack version is
intended for use with the 515R1/517R1 rack
mount card cages.
Superior Diagnostics
The SMARTS™ diagnostic technology includes
a built-in video test pattern generator on the
transmitter for system setup and on-screen
diagnostics to indicate insufficient optical power or
an inactive video channel for each output. LEDs
monitor the status of the video and optical signals.
Standard Features
One-way transmission of four video channels over one
E
multimode fiber
Coarse Wavelength Division Multiplexer (CWDM)
E
technology
E
10-bit video processing
E
500 TVL resolution
E
Video SNR >55 dB
E
6.2 MHz video bandwidth
Built-in test pattern generator and On-Screen
E
Diagnostics (OSD)
E
16 dB optical budget
E
Supports all major video formats
E
Optical AGC
E
Standalone or rack configurations
S708VT-RST
8-Ch Digital Video Tx, MM, Rack
Specifications
Video
Channels 8
E
Format All major formats
E
Input/Output Signal 1.0 Vpp composite
E
Bandwidth 6.2 MHz
E
Signal-to-Noise Ratio >55 dB
E
Video Resolution >500 TV lines
E
Input/Output Impedance 75 Ohms
E
Differential Phase <0.7°
E
Differential Gain <2%
E
Optical
Mode Multimode
E
Optical Budget 13 dB
E
Emitter Laser
E
Wavelength 850/1300 nm or 1310/1330 nm (depending on model)
E
Operating Distance Up to 3.2 mi (5.2 km) (depending on model)
E
Gain Control Optical Automatic Gain Control (OAGC)
E
Transmitter Launch Power -15 dBm
E
Receiver Sensitivity -28 dBm
E
Electrical
Input Power, Standalone Units 24 VAC or 13.5 VDC regulated (transmitter); 13.5 VDC
E
regulated (receiver)
Input Power, Rack Units 13.5 VDC regulated
E
Current Requirement 700 mA (standalone transmitter); 1.2 A (rack units and
E
standalone receiver)
Power Consumption 10 W (standalone transmitter); 17 W (standalone receiver and
E
rack units)
Power Factor 10 (rack units only)
E
Protection Solid-state short circuit protection
E
Optional Power Supply Model 614P
E
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
E
Maximum Humidity 95% relative, noncondensing
E
Standards
Emmissions FCC Part 15, ICES-003, AS/NZS 3548, EN55022
E
Immunity EN50130-4, EN61000-3-2, -3
E
Safety UL 1950, CAN/CSA 22.2, NO. 950-95
E
Laser Safety 21CFR1040, EN60825-1, -2
E
Mechanical
Dimensions (LWD), Standalone Units 5.0'' x 4.8'' x 2.2'' (127 x 122 x 56
E
mm)(transmitter); 9.31'' x 6.33'' x 2.15'' (236 x 89 x 55 mm) (receiver)
Dimensions, Rack Units 2 slots (2.0'')
E
Weight, Standalone Units Transmitter 1.8 lbs (0.82 kg); Receiver 2.25 lbs (1.02 kg)
E
Weight, Rack Units 1.24 lbs (0.56 kg)
E
Construction Steel (standalone transmitter); Aluminum (rack units and standalone
E
receiver)
Ordering Information
S708VT-RST
8-channel, rack card - video multiplexers over one dedicated
fiber
As a company of innovation, UTC Fire & Security reserves the right to change product specifications without notice. For the latest
product specifications, visit UTC Fire & Security online or contact your UTC Fire & Security sales representative.
IPS-SA-S708VT-RST-2014-02-16 09:15:23