Interlogix S708VR-RST, S708VT-EST, S708VR-EST Specsheet
e
GE Security Product Data Sheet
www.GESecurity.com
S708V
8-Channel Video
Overview
The S708V fiber links use revolutionary Coarse Wavelength Division
Multiplexer (CWDM) technology to provide simultaneous long-range
transmission of multiple full-frame, real-time video signals over one
multimode fiber.
Exceptional Performance
The eight-channel system features a bandwidth of 6.2 MHz per
channel and optical automatic gain control (OAGC). It accepts analog
baseband input signals and converts them to digital format for
transmission, assuring high-quality video outputs at the receiver.
Superior Diagnostics
The SMARTS™ diagnostic technology includes a built-in video test
pattern generator on the transmitter for system setup and on-screen
diagnostics to indicate insufficient optical power or an inactive video
channel for each output. LEDs monitor the status of the video and
optical signals.
Standard Features
One-way transmission of eight video channels over one
l
multimode fiber
Coarse Wavelength Division Multiplexer (CWDM)
l
technology
l
10-bit video processing
l
500 TV lines resolution
l
Video SNR >55 dB
l
6.2 MHz video bandwidth
Built-in test pattern generator and On-Screen Diagnostics
l
(OSD)
l
13 dB optical budget
l
Color or monochrome video
l
Optical AGC
l
Standalone or rack configurations
S708V
8-Channel Video
Specifications
Video
l
Channels: 8
l
Format: NTSC, PAL, SECAM
l
Input/Output Signal: 1.0 V p-p composite
l
Bandwidth: 6.2 MHz
l
Signal-to-Noise Ratio: >55 dB
l
Video Resolution: >500 TV lines
l
Input/Output Impedance: 75 ohms
l
Differential Phase: <0.7°
l
Differential Gain: <2%
Optical
l
Mode: Multimode
l
Optical Budget: 13 dB
l
Emitter: Laser
l
Wavelength: 850/1300 nm or 1310/1330 nm (depending on model)
l
Operating Distance: Up to 3.2 mi (5.2 km) (depending on model)
l
Gain Control: Optical Automatic Gain Control (OAGC)
l
Transmitter Launch Power: -15 dBm
l
Receiver Sensitivity: -28 dBm
Environmental
l
Operating Temperature: -40 to 167 °F (-40 to 75 °C)
l
Maximum Humidity: 95% relative, noncondensing
Standards
l
Emmissions: FCC Part 15, ICES-003, AS/NZS 3548, EN55022
l
Immunity: EN50130-4, EN61000-3-2, -3
l
Safety: UL 1950, CAN/CSA 22.2, NO. 950-95
l
Laser Safety: 21CFR1040, EN60825-1, -2
Mechanical
Dimensions (LWD), Standalone Units: 5.0" x 4.8" x 2.2" (transmitter);
l
9.31" x 6.33" x 2.15" (receiver)
l
Dimensions, Rack Units: 2 slots (2.0")
Weight, Standalone Units: Transmitter 1.8 lbs (0.82 kg); Receiver 2.25
l
lbs (1.02 kg)
l
Weight, Rack Units: 1.24 lbs (0.56 kg)
Construction: Steel (standalone transmitter); Aluminum (rack units and
l
standalone receiver)
Electrical
Input Power, Standalone Units: 24 VAC or 13.5 VDC regulated
l
(transmitter); 13.5 VDC regulated (receiver)
l
Input Power, Rack Units: 13.5 VDC regulated
Current Requirement: 700 mA (standalone transmitter); 1.2 A (rack
l
units and standalone receiver)
Power Consumption: 10 W (standalone transmitter); 17 W (standalone
l
receiver and rack units)
l
Power Factor: 10 (rack units only)
l
Protection: Solid-state short circuit protection
l
Optional Power Supply: Model 613P
Related Diagram Ordering Information
GE Security
g
www.GESecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GE Security online at www.GESecurity.com or contact your GE Security sales representative.
IPS-S708V-2004-06-17 17:28:31 Released : 30.04.2004
Mailing Address
4575 Research Way, STE 250
Corvallis, OR 97333 USA
www.GESecurity.com
Americas
800-469-1676 (US only)
tel 541-754-9133
fax 541-754-7162
Asia
tel 852-2907-8108
fax 852-2142-5063
Australia
tel +61-3-9676-0270
fax +61-3-9646-7005
Europe
tel +44-113-238-1668
fax +44-113-253-8121
Latin America
tel 305-267-4301
fax 305-267-4300
Loading...