Interlogix MS-POE Specsheet
Network Transmission
Power over Ethernet (PoE) Injector
Overview
GE’s Power over Ethernet (PoE) Injector is now IFS. The
IFS Power over Ethernet Injector is a quick and easy
solution that can be used when a network device does
not provide the functionality as a power source equipment
(PSE), such as a non-PoE switch, and yet the edge device
being deployed is a PoE powered device (PD).
This module provides the ability to combine Ethernet
data and PoE on a single category cable for deployment
of a PoE powered edge device up to 100m (328 ft.). This
provides a cost-effective and efcient power distribution
cable management solution for a PoE-centric IP network.
The 100m (328 ft.) distance is based on the EIA-568
standard and is the maximum distance between two
Ethernet devices. The IFS Power over Ethernet Injector can
be deployed at any location within the 100m (328ft.) cable
run; however, typically this device would be installed closer
to the non-PoE device.
This device facilitates easier network planning by
eliminating restrictions of edge device placement near AC
power outlets and reduces the need for AC wiring and
installation costs while delivering higher reliability.
MS-PoE
Standard Features
Installation
• Compact size
• Plug-and-play design
• Standalone or wall-mount installation
• Can be used with the IFS MS-PoE Injector or
other IEEE 802.3af compliant devices
Standards Compliance
• Supports 10/100Base-TX Ethernet
• Complies with IEEE 802.3/802.3u
• Complies with IEEE 802.3af PoE Standard
PoE Circuit
• Auto-detect of PoE IEEE 802.3af equipment providing
protection from incorrect installation
• Current overload detect
• PoE Ready/In-use LED indicator
Physical Ports
• One RJ-45 connector for data
• One power connector for power input
• One RJ-45 connector for data and 48VDC output
to a single Category cable
Network Cable
• For use with EIA568 Category 5 or better cables
• Can deploy data and PoE on a single Category cable
up to 100m (328 ft.) to a PoE powered (PD) edge device
Warranty
• 3-year Warranty
IEEE 802.3af
Power over Ethernet
Injector
MS-PoE
.94 in.
(24 mm)
2.87 in.
(73mm)
.94 in.
(24 mm)
North America
T 888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 561-998-6100
F 561-994-6572
interlogix.com
ufcreandsecurity.com
Specications subject to
change without notice.
© 2010 Interlogix, A UTC Fire & Security Company.
All rights reserved.
GE and the GE monogram are trademarks of the
General Electric Company and are under license
to UTC Fire & Security, 9 Farm Springs Road,
Farmington, CT 06034-4065
Specications
Ethernet
Data Rate 10/100Mbps
Throughput (packet per
second)
IEEE Standards
EIA/TIA-568 Standards Category 5/5e cable
Power Over Ethernet (PoE)
PoE Standard IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type Mid-Span / Type B
PoE Output Pin Assignment 4/5(+), 7/8(-)
PoE Output Power 48VDC @ 350mA, 15.4 watts max.
Connectors & Indicators
Ethernet + DC Out
Ethernet Data 1 x RJ-45 connector (10/100Base TX for data in)
DC Input DC receptacle
LED Indicator 1-power; 1-PoE Ready/In-use
Electrical and Mechanical
Input Power 48VDC, 380mA max.
PoE Output Power 48VDC @ 350mA, 15.4 watts max.
Maximum Powered Devices 1
Enclosure Plastic
Dimensions (H x W x D) 2.87 x 2.17 x 0.94 in.; (73 x 55 x 24mm)
Weight 0.22 lbs. / 50g
148810pps@64Bytes
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3af Power over Ethernet
1 x RJ-45 connector
(10/100Base-TX with IEEE 802.3af PoE PSE for data + DC out)
Ordering Information
MS-PoE
IEEE 802.3af Power Over
Ethernet Injector (mid-span)
Dimensional Diagram
2.87 in.
(73mm)
2.17 in.
(55 mm)
.94 in.
(24 mm)
.94 in.
(24 mm)
Environmental
MTBF >50,000 hrs. @ 25°C
Operating Temperature 0ºC~50ºC
Storage Temperature -20ºC~70ºC
Relative Humidity 5%–90% (non-condensing)
Typical Applications
Ethernet Switch
(non-PoE)
AC Power
Ethernet Switch
(non-PoE)
AC Power
DATA
Power
DATA
Power
PoE Injector
(PSE Device)
MS-PoE
PoE Injector
(PSE Device)
MS-PoE
DATA + 48VDC Power
Cat 5e Cable
100m (328 ft) Max.
DATA +
48VDC Power
Cat 5e Cable
PoE Splitter
SP-PoE
5VDC or 12VDC Power
DATA
PoE Powered
IP Camera (PD)
Non-PoE
IP Camera
003- 3304 2010/11 (6 0342F)
Loading...