Interlogix MPI267 Specsheet

M O O S E

P R O D U C T I N F O R M A T I O N B U L L E T I N

MPI-267 POWER
DISCONNECT
MODULE

U

L



LISTED

• Virtually a universal hookup for
most 12 volt controls, power
supplies, or other similar devices

• A.C. and D.C. power disconnect
switch on board

• Hookup supplied for:

- Transformer input screw terminals

- A.C. wiring hookup for control,
power supply, or other device

- Battery lug terminals for
hookup from control, power
supply, or device

- Battery hookup wiring to battery

• Low battery disconnect relay on
board drops battery out at 7.5 VDC

The Moose MPI-267 is “the right connection” for

almost any 12 VDC control, power supply, or other

such powered device which uses a transformer and

12 VDC battery.

The MPI-267 is a compact circuit board which

mounts with double sided tape. It provides a

convenient way of shutting off power, both A.C. and

D.C. to a control, power supply, or other similar device.

An on-board relay is an optional function which

disconnects a backup battery when A.C. fails and the

battery voltage drops to below 7.5 VDC. The benefits

of this function help to eliminate deep discharged

batteries, possible cell polarity reversal when the

battery is allowed to reach an extremely low voltage

condition, and ultimately fewer service calls.

Specifications:

Relay contacts related at 5A 12 VDC
Automatic shutdown if voltage falls below 7.5 VDC
Operating temperature range: 32°F to 120°F (0°C to 49°C)
Lightning/Transient protection
On board power switch for easy removal of AC and
battery power
On board LED for visual AC power indication
UL Listed

MOOSE

a product of sentrol, inc

MOOSE

12345 SW Leveton Drive

Tualatin, OR 97062

Sales: 800.547.2556

Technical Service: 800.800.2027

Fax: [phone]

Sentrol reserves the right

to change specifications

without notice

©

1995 Sentrol, Inc.

X-1979-FLG10K-0695

Printed on recycled paper