Interlogix MCR-RPS, MCR-R15 Specsheet

IFS Line / Network Transmission
MCR Chassis
Media Converter Rack with Internal Power Supply - 15 slots
Overview
The IFS MCR Series Media Converter Rack offers a low-profile (2.4U) design for efficient, high-density media converter installation in a standard EIA 19" rack. The chassis can accommodate up to 15 media converter modules from the IFS MCR Series family of media converters for Fast or Gigabit Ethernet transmission over optical fiber or coaxial cable.
Plug-and-Play/Hot-swappable Design
The IFS MCR Series provides plug-and-play installation and is fully hot-swappable. This allows the insertion or removal of any media converter within the rack without interruption in operation of other modules within the rack.
Reliable Redundant Power
The unique design of the IFS MCR Series Media Converter Rack provides a separate power supply bay in the rear of the unit. This allows for maximum usage of all 15 slots in the rack to be used for media converter modules.
The IFS MCR Series Media Converter Rack comes with one MCR-RPS installed. A second bay provides capacity for an additional power supply for redundant power operation to ensure continuous network performance in case of power supply failure.
Stan da rd F e at u reS
Robust Design
• Standard EIA 19" design
• Plug-and-Play design
• Hot-swappable
• Built-in diagnostic indicators
Redundant Power
• Convenient universal 100~240VAC power supply
• Two rear panel power bays for redundant power
supply operation
• Electrically isolated power bays for highly reliable operation
• Built-in protection from over-voltage, over-current and short-circuit faults
MCR Series Media Converters
• MCR200-1T/1CX Fast Ethernet to Coax
• MCR205-1T/1S Fast Ethernet to SFP (Managed)
• MCR300-1T/1S Gigabit Ethernet to SFP
The IFS MCR Series provides a cost-effective solution for migrating analog systems to IP, while still maintaining the investment in your current cabling infrastructure.
Warranty
• 3-year warranty
interlogix.com
utcfireandsecurity.com
Specifications
Connectors Description
AC Line-in
Back plane DC connector (one per slot)
LED Indicators
Power 1 (Green)
Power 2 (Green)
Fan A (Green)
Fan B (Green)
Electrical & Mechanical
Input Power 100~240 VAC, 50-60Hz @ 1.5A
Power Consumption
Output power (backplane) +5VDC Enclosure Metal No. of slots 15 Fans 2 Dimensions (W x D x H) 17.3 x 7 x 4 in. (440 x 180 x 103mm) 2.4U height Weight 9.47 lbs. / 4.30kg
Environmental
Reliability
Operating Temperature
Storage Temperature
Relative Humidity
Standards Compliance
Regulatory Compliance
EMI
EMS
IEC Socket
2.5mm DC receptacle
On/AC power Off/not powered or power failure
On/AC power Off/not powered or power failure
On/fan functioning Off/fan malfunction
On/fan functioning Off/fan malfunction
Unloaded: 10 watts / 34BTUs (with 1 Power Supply) Fully loaded: 88 watts / 301BTUs
MTBF > 50,000 hrs @ 25°C
0º ~ 50º C
-10º ~ 70º C
0 ~ 90% (non-condensing)
FCC Part 15 Class A; CE; UL 60950-1; EN 60950-1; IEC 60950-1
EN 55022 CLASS A EN61000-3-2 EN61000-3-3
EN 50130-4 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-8
Loading...
+ 2 hidden pages