Interlogix MCR300-1T-1S Specsheet

IFS Line / Network Transmission

MCR300-1T/1S

Gigabit Ethernet to SFP
Media Converter

Overview

The IFS Gigabit Ethernet to SFP Media Converter is designed for
the most demanding extended IP network applications offering the
flexibility of SFP technology for Gigabit Ethernet transmission over
optical fiber.

SFP Technology

The IFS MCR300-1T/1S converts 10/100/1000Base-T Ethernet
on copper to 1000Base-LX/SX optical fiber via Small Form-format
Pluggable (SFP) technology. This media converter can be custom
configured to your exact system design specifications by utilizing a
variety of IFS SFP Mini-GBIC modules. IFS SFP Mini-GBIC modules
are available in a variety of versions from multi-mode or single mode
fiber, 1 or 2 fibers and wide-temperature versions.

Enhanced Smart Link Management

The MCR300-1T/1S provides Auto MDI/MDI-X on its TP port and a
DIP-switch to configure the Link Fault Pass-through function (LFP).
The LFP function includes both Link Loss Carry Forward (LLCF) and
Link Loss Return (LLR). The LLCF/LLR function combination provides
efficient TP and optical transmission media monitoring and enables
immediate alarm notification to network administrators in the event of
a link problem.

Unified Enclosure Design

The MCR300-1T/1S is designed with a unified enclosure that can be
used in a stand-alone installation or can easily be inserted into the IFS
MCR-R15 media converter rack. The IFS Media Converter Rack can
provide DC power for up to 15 MCR Series Media Converters.

Stand ard Fe ature S

Ethernet

• 10/100/100 0Bas e-T X

• Complies with IEEE 802.3 10Base-T; IEEE 802.3u 100Base-TX;
and IEEE 802.3ab 1000Base-T

• Auto-negotiation and Auto-MDI/MDI-X

• Half-duplex or Full-duplex for 10/100Mbps; full-duplex for
1000Mbps

• Supports OAM (TS-1000 and IEEE 802.3ah)

• 9K jumbo frame supported

SFP (Mini-GBIC) Port

• IEEE 802.3z 1000Base-LX/SX standards

• 1 SFP slot provides custom conguration

• Optical ber and distance varies by SFP (ordered separately)

Installation & Diagnostics

• Compact size, plug-n-play installation

• LED indicators for easy local network diagnostics

• DIP-switch for LFP function (Enable / Disable) setting

• Unied design for stand-alone or rack mount installation
(MCR-R15 chassis)

Warranty

• 3-year warranty

interlogix.com

utcfireandsecurity.com

Specifications

Ethernet Description

Data Rate

Packet Forwarding Rate
(64bytes)

OAM

Jumbo Packet Size

Flow Control

Connector

Cable Type and Distance

Fiber

Data Rate

Connector

Fiber Type and Distance

LED Indicators & Controls

Power/Status

10/100/100Base-T port link/
activity

10/100/1000Base-T port speed

SFP (Mini-GBIC) port link

DIP switch

Electrical & Mechanical

Power

Enclosure

Dimensions (W x D x H) in, mm

Weight

Environmental

Operating Temperature

Storage Temperature

Relative Humidity

MTBF

Standards Compliance

IEEE

EMI

EMS

10/100/1000Mbps

14,880pps @10Mbps
148,810pps @100Mbps
1,488,000pps @ 1000Mbps

TS-1000, IEEE 802.3ah terminal

9K

Half/Full-duplex

RJ-45 (Auto-MDI/MDI-X)

10Base-T: 2-pair UTP Cat. 3,4,5, up to 100 m
100Base-TX: 2-pair UTP Cat. 5, up to 100 m
1000Base-T : 2-pair UTP Cat. 5/5e/6, up to 100m

1000Base-LX/SX

SFP (Mini-GBIC) port

Varies by SFP module

Green/On – power detected (+5VDC)

Green/On – link established
Green/blinking – active port (TX/RX)

Green/On – 1000Mbps full duplex mode operation
Green/Off – 10/100Mbps full duplex mode operation

Green/On – link established
Green/blinking – active port (TX/RX)

LFP function (Enable/Disable) setting

5VDC, 2A (5.6 watts)

Metal

3.82 x 2.76 x 1.02 in.; (97 x 70 x 26 mm)

0.41 lbs. / 190 grams

0°C ~ 50°C

-10°C ~ 70°C

5% ~ 90% (non-condensing)

> 50,000 hrs @ 25°C

IEEE 802.3, 10Base-T
IEEE 802.3u, 100Base-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3z 1000Base-SX/LX/BX

EN 55022 CLASS A
EN61000-3-2:2006
EN61000-3-3: 1995+1A:2001+A2:2005

EN 55024:1998+A1:2001+A2:2003
IEC 61000-4-2:2001
IEC 61000-4-3:2008
IEC 61000-4-4:2004
IEC 61000-4-5:2005
IEC 61000-4-6:2008
IEC 61000-4-8:2001