Interlogix MCR205-1T-1S Specsheet
Product Data Sheet
MCR205-1T/1S
Fast Ethernet to SFP Managed Media Converter
Overview
The IFS Fast Ethernet to SFP Managed Media
Converter is designed for the most demanding IP
network applications offering the flexibility of SFP
technology and remote network management for
optimizing network performance.
SFP Technology
The IFS MCR205-1T/1S converts 10/100Mbps
(TX) Ethernet on copper to 100Mbs (FX) fiber via
Small Form-format Pluggable (SFP) technology.
This media converter can be custom configured to
your exact system design specifications by
utilizing a variety of IFS SFP Mini-GBIC modules.
IFS SFP Mini-GBIC modules are available in a
variety of versions from multi-mode or single
mode fiber, 1 or 2 fibers and wide-temperature
versions.
Enhanced Remote Management Features
Standard Features
For efficient management, the IFS Fast Ethernet
to SFP Managed Media converter supports
Simple Network Management Protocol (SNMP)
and can be remotely managed via any
standards-based management software.
Management functions include IP address
configuration, DHCP Client function, port
configuration, converter configuration, 802.1Q
VLAN tagging, Q-in-Q VLAN, Ingress/Egress
bandwidth control, QoS and Layer protocol filter,
and broadcast storm control, to enhance
bandwidth utilization. In addition, the
TS-1000/802.3ah OAM (operations,
administration, and maintenance) protocol is
supported which allows management and
monitoring of a remote device via the
MCR205-1T/1S media converter.
Unified Enclosure Design
The MCR205-1T/1S is designed with a unified
enclosure that can be used in a standalone
installation or can easily be inserted into the IFS
MCR-R15 media converter rack. The IFS Media
Converter Rack can provide DC power for up to
15 MCR Series Media Converters.
E
10/100 Base-TX
E
Complies with IEEE 802.3, IEEE 802.3u
E
Auto-negotiation and MDI/MDI-X
10/100Base-TX: 2-pair Cat. 3/4/5 UTP cable, up to 100
E
meters
E
IEEE 802.3u 100Base-FX standard
E
1 SFP slot provides custom configuration
Optical fiber and distance varies by SFP (ordered
E
separately)
E
Plug-n-Play installation
Unified design for stand-alone or rack-mount
E
installation (MCR-R15 chassis)
E
LED indicators for easy local network diagnostics
E
Firmware upgradable via remote web interface
E
Reset button to reset to factory default
E
Layer 2 management
Built-in IP-based Web interface for remote
E
management
E
SNMP v1 / v2c monitor / private Enterprise MIB
Loop detection / broadcast / multicast / unicast storm
E
control
MCR205-1T/1S
Fast Ethernet to SFP Managed Media Converter
Specifications
Ethernet
Data Rate 10/100 Base-TX port
E
Throughput (packet per second) 148810pps @ 64Bytes
E
Switch Architecture Store-and-forward
E
Flow Control Half/Full-duplex
E
Connector RJ-45 (Auto-MDI/MDI-X)
E
Cable Type and Distance 10Base-T: 2-pair UTP Cat. 3,4,5, up to 100 m100Base-TX:
E
2-pair UTP Cat. 5, up to 100 m
Fiber
Data Rate 100Base-FX
E
Connector SFP (Mini-GBIC) port
E
Fiber Type and Distance Varies by SFP module
E
LED Indicators & Controls
Power/Status Green/On – power detected (+5VDC)
E
10/100Base-TX port link/activity Green/On – link establishedGreen/blinking –
E
active port (TX/RX)
10/100Base-TX port speed Green/On – 100Mbps half/full duplex mode operation
E
Green/Off – 10Mbps half/full duplex mode operation
SFP (Mini-GBIC) port link Green/On – link establishedGreen/blinking – active port
E
(TX/RX)
Reset button Reset to factory default settings
E
Electrical & Mechanical
Power 5VDC, 2A (3.3 watts)
E
Enclosure Metal
E
Dimensions (W x D x H) 3.82 x 2.76 x 1.02 in. (97 x 70 x 26mm)
E
Weight 0.41 lbs. / 190 grams
E
Environmental
Operating Temperature 0°C ~ 50°C
E
Storage Temperature -10°C ~ 70°C
E
Relative Humidity 5% ~ 90% (non-condensing)
E
MTBF > 50,000 hrs @ 25°C
E
Standards Compliance
IEEE IEEE 802.3, 10Base-T / IEEE 802.3u, 100Base-TX / IEEE 802.3u, 100Base-FX
E
EMI EN 55022 CLASS A / EN61000-3-2:2006 / EN61000-3-3:
E
1995+1A:2001+A2:2005
EMS EN 55024:1998+A1:2001+A2:2003 / IEC 61000-4-2:2001 / IEC 61000-4-3:2008 /
E
IEC 61000-4-4:2004 / IEC 61000-4-5:2005 / IEC 61000-4-6:2008 / IEC
61000-4-8:2001
Accessories
PS5VDC2A-US 5VDC 2A Wall Mounted Power Supply
E
PS5VDC2A-UK 5VDC 2A Wall Mounted Power Supply
E
PS5VDC2A-EU 5VDC 2A Wall Mounted Power Supply
E
MCR-R15 MCR Series Media Convertoe Chassis
E
Ordering Information
MCR205-1T/1S
Fast Ethernet to SFP Managed Media Converter
As a company of innovation, UTC Fire & Security reserves the right to change product specifications without notice. For the latest
product specifications, visit UTC Fire & Security online or contact your sales representative.
IPS-UK-MCR205-1T/1S-2012-11-19 13:28:13
Loading...