Interlogix MCR205-1T-1S Installation Guide

IFS MCR205-1T/1S
Quick Installation Guide

P/N 1076523 • REV A • ISS 07FEB12

Copyright © 2012 UTC Fire & Security Company. All rights

r

reserved.

Trademarks and

patents

Interlogix, IFS MCR205-1T/1S, the IFS Brand and

logo are trademarks of UTC Fire & Security.
Other trade names used in this document may be

trademarks or registered trademarks of the
manufacturers or vendors of the respective
products.

Manufacture

UTC Fire & Security Americas Corporation, Inc.

2955 Red Hill Avenue, Costa Mesa, CA
92626-5923, USA

Version This document applies to IFS MCR205-1T/1S

version 1.0.

Certification

N4131

FCC compliance Class A: This equipment has been tested and

found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the user
will be required to correct the interference at his
own expense.

ACMA

compliance

European Union

directives

Notice! This is a Class A product. In a domestic

environment this product may cause radio
interference in which case the user may be
required to take adequate measures.

2004/108/EC (EMC directive): Hereby, UTC Fire

& Security declares that this device is in
compliance with the essential requirements and
other relevant provisions of Directive 2004/108/EC

2002/96/EC (WEEE directive): Products marked

with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info.

Contact

information

Customer support

www.utcfireandsecurity.com or
www.interlogix.com

www.interlogix.com/customer-support

Contents

Package Contents 1
Hardware & Software requirements 1
Web Management 2

Logging in to the MCR205-1T/1S 3

Hardware & Password Reset 4
Contacting Technical Support 5

IFS MCR205-1T/1S Quick Installation Guide i

Package Contents

Thank you for purchasing the IFS MCR205-1T/1S Fast
Ethernet Managed Media Converter.

Open the package containing the MCR205-1T/1S and
carefully unpack it. The box should contain the following items:

• MCR205-1T/1S x1

• User’s Manual CD x1

• Quick Installation Guide x1
If any of the items in the package are damaged or missing,

please contact your distributor or IFS sales rep. If possible,
retain the original carton and packaging material in case of
need to return the product for repair/replacement.

Hardware & Software requirements

• Client workstations running Windows 98/ME, NT4.0,
2000/XP, Vista, MAC OS9 or later, Linux, UNIX or other
platform compatible with TCP/IP protocols

• Workstation installed with Ethernet NIC (Network Card)

• Ethernet Port connection

• Network cables - Use standard network (UTP) cables with
RJ45 connectors

• Client PC installed with WEB Browser and JAVA runtime
environment Plug-in

Note: We recommended using Internet Explorer 6.0 or above

to access the MCR205-1T/1S Fast Etherenet Managed Media
Converter.

IFS MCR205-1T/1S Quick Installation Guide 1

Web Management

The IFS MCR205-1T/1S has a built-in browser interface. The
MCR205-1T/1S can be managed remotely by having a remote
host with a Web browser, such as Microsoft Internet Explorer,
Mozilla Firefox, Google Chrome or Apple Safari.

To be able to login to the media converter, the administrator
workstation should be set to the same IP range and subnet
mask as the converter. The default IP address for the
MCR205-1T/1S media converter is 192.168.0.100, and the
default subnet mask is 255.255.255.0. Therefore, the
administrator PC should be set to 192.168.0.x (where x is a
number between 1 and 254) and subnet mask should be set to

255.255.255.0.

Figure 1: IP Management Diagram

2 IFS MCR205-1T/1S Quick Installation Guide

Logging in to the MCR205-1T/1S

1. Open the web browser and enter the default IP address
http://192.168.0.100 to the address bar.

2. Figure 2 illustrates the Web Login screen that will appear
next.

• Default IP Address: 192.168.0.100

• Default user name: admin

• Default password: admin

Figure 2: Web Login screen

3. Enter the default username and password on the Web
login screen. The Main Web Screen appears as illustrated
in Figure 3.

IFS MCR205-1T/1S Quick Installation Guide 3

Figure 3: Main Web screen

After successful login, the MC205-1T/1S media converter can
be managed through the available menu options. Please refer
to the user manual for more information on the web
management menu options.

Hardware & Password Reset

To reset the IP address to the default IP Address of
“192.168.0.100” and reset the login password to default value
(default user name and password is admin). Press and hold
the hardware reset button on the front panel for about 10
seconds. After the device is rebooted, you can login the
management Web interface with the default IP address of

192.168.0.100 and default user name / password (admin).

4 IFS MCR205-1T/1S Quick Installation Guide

Figure 4: Reset button

Contacting Technical Support

Contact technical support if you encounter any difficulties
during this installation. Please make sure you have the
requested diagnostic or log files ready before you contact us
by phone or go to www.interlogix.com/customer-support.

Technical Support

Europe, Middle East and Africa

W Select Contact Us at www.utcfssecurityproducts.eu

North America

T +1 855.286.8889
E [e-mail]

Australia

E [e-mail]

IFS MCR205-1T/1S Quick Installation Guide 5