Interlogix MCR200-1T-1TW Specsheet

®

IFS

Line / Network Transmission

MCR200-1T-1TW

Ethernet over Telephone Wire
Media Converter

OVERVIEW

The IFS® Ethernet to Telephone Wire Media Converter is a high­performance module that combines two well-proven technologies—
Ethernet and VDSL2— providing a cost-effective solution for utilizing
an existing telephone wire (POTS)* infrastructure when migrating from
analog to an Ethernet/IP system.

This module must be used in pairs and provides plug-and-play
installation. The one box design allows for easy set-up as either a
client-side (CPE) or central-side (CO) operating device. The module
is IEEE 802.3 compliant and supports multiple network protocols. In
addition, the module provides on-board feature-rich diagnostic LEDs
and can be used with 4-pair, 50 or 100-pair telephone (POTS) wire.

The IFS Ethernet to Telephone Wire Media Converter can extend
Ethernet transmission up to 1 mile (1.6km) depending on bandwidth
requirements and quality of the telephone wire (POTS) used. Also,
depending on distance and bandwidth, these modules can send
data from multiple IP devices when used with a network switch.
These modules can be used for applications such as IP cameras,
IP access control, IP intercom, or any Ethernet data transmission.

STANDARD FEATURES

VDSL2

• Cost-effective VDSL2 CO/CPE bridge solution

• One-box design, CO/CPE selectable via DIP-switch

• Selectable target data rate and target SNR margin

• Discrete Multi-Tone (DMT) line coding

Ethernet

• 10/10 0Mbps Ethe rnet

• Auto-negotiation and auto-MDI/MDI-X

• Half-duplex back pressure and IEEE802.3x full-duplex
pause-frame fl ow control

• Supports up to 1536 bytes packet size

• 802.1Q VLAN tag transparent

Installation & Diagnostics

• Plug-and-play installation

• Compact size

• Supports telephone wire (POTS)

• Extensive LED indicators for network diagnostics

* The MCR200-1T-1TW utilizes standard telephone (POTS) type cable for transmission

of Ethernet/IP data. It is not designed for transmitting Ethernet data on a PBX system
or public switch telephone network (PSTN).

Rack Mountable

• Compatible with MCR-R15 rack chassis

• Easy Plug and Play installation

• Compatible with MC250-4T/1CXT or MC251-4P/1CXT modules

Warranty

• 3-year warranty

interlogix.com

M C R 2 0 0 - 1 T-1 T W

Ethernet over Telephone Wire Media Converter

Ethernet Description

Data Rate

Connector

Cable

Telephone Wire (VDSL2)

VDSL2 Transmission Mode

VDSL-DMT Encoding

Connector

Cable

VDSL2 Distance> Data Rate*

LED Indicators

Power

10/100 Base-TX Port

VDSL2 (Telephone Wire) Port

Electrical & Mechanical

Power

Enclosure

Dimensions (H x W x D)

Weight

Environmental

Operating Temperature

Storage Temperature

Relative Humidity

* The actual data rate will vary based on the quality of the twisted-pair wire and environmental factors.
See instruction manual for a complete listing of data rates at various distances.

10/100Base-TX with Auto-negotiate and Auto-MDI/MDI-X

RJ-45

10Base-T (Cat 3, 4, 5) / 100Base-T (Cat 5e) — 328 ft. (100m)

CO/CPE Mode; Channel; Rate Limit; SNR

ITU-T G.993.1 VDSL; ITU-T G.997.1;
ITU-T G.993.2 VDSL2 (Profi le 17a support)

RJ11 Female phone jack

Twisted-pair telephone wire (AWG24 or better)

(Down stream/Up stream)
Asymmetric

656 ft. (200m) - 100/55Mbps 656 ft. (200m) - 90/90Mbps
1312 ft. (400m) - 90/50Mbps 1312 ft. (400m) - 90/90Mbps
2625 ft. (800m) - 60/25Mbps 2625 ft. (800m) - 55/50Mbps
5249 ft. (1600m) - 25/4 Mbps 5249 ft. (1600m) - 20/15Mbps

On - Green

LNK/ACT; 100Mbps - Green

LNK/ACT; CO Mode; CPE Mode - Green

5V @ 2A

Metal

3.82 x 2.76 x 1.02 in. (9.7 x 7.0 x 2.6 cm)

0.44 lbs/200g

0°C~50°C

-20°C~70°C

0%~90% (non-condensing)

(Down stream/Up stream)
Symmetric

North America

T 855-286-8889

Dimensional DiagramsSpecifi cations

(7 cm)

2.76 in.

1.02 in.

(2.6 cm)

Agency Compliances

• FCC

• CE

Latin America

T 561-998-6114

3.82 in.

(9.7 cm)

1.02 in.

(2.6 cm)

Ordering Information

MCR200-IT-1TW

Note: External power supply must be purchased separately. Must be used in pairs or with the MC250-4T/1CXT or MC251-4P/1CXT modules.

Ethernet over Telephone Wire (VDSL2)

Accessories

PS5VDC2A-US

MCR-R15

5VDC 2A Wall Mounted Power Supply

Media Converter Rack w/Power Supply

Typical Application

Network Switch

IP Camera

MCR200-1T-1TW MCR200-1T/1CX

Cat 5e Cable

100m (328 ft.) Max.

Alternate Application*

Network Switch

IP Cameras IP IntercomIP Access

Up to 1 mile (1.6km)

Telephone Wire (POTS)

*Total amount of IP devices depends

on total data bandwidth required.

Cat 5e Cable

100m (328 ft.) Max.

interlogix.com

Specifi cations subject to change without notice.

© 2013 United Technologies Corporation.

All rights reserved.

Interlogix is par t of UTC Building & Industrial Systems,

a unit of United Technologies Corporation.

310-3738 2013/12 (76114)