Interlogix MCR200-1T-1CX Specsheet

IFS Line / Network Transmission

MCR200-1T/1CX

Ethernet Over Coax Media Converter

OVERVIEW

The IFS Ethernet to Coax Media Converter is a high-performance
module that combines two well-proven technologies—Ethernet and
VDSL2— providing a cost-effective solution for utilizing an existing
coax cable infrastructure when migrating from analog to an
Ethernet/IP system.

This module must be used in pairs and provides plug-and-play
installation. The one box design allows for easy set-up as either a
client-side (CPE) or central-side (CO) operating device. The module
is IEEE 802.3 compliant and supports multiple network protocols. In
addition, the module provides on-board feature-rich diagnostic LEDs
and can be used with either 50 or 75 ohm coax.

The IFS Ethernet-over-Coax media converter can extend Ethernet
transmission up to 1.8 miles (3km) depending on bandwidth
requirements and quality of the coaxial cable used. Also, depending
on distance and bandwidth, these modules can send data from
multiple IP devices when used along with a network switch. These
modules can be used for applications such as IP cameras, IP access
control, IP intercom, or any Ethernet data transmission.

STANDARD FE ATUR ES

VDSL2

• Cost-effective VDSL2 CO/CPE bridge solution

• One-box design, CO/CPE selectable via DIP-switch

• Selectable target data rate and target SNR margin

• Discrete Multi-Tone (DMT) line coding

Ethernet

• 10/100Mbps Ethernet

• Auto-negotiation and auto-MDI/MDI-X

• Half-duplex back pressure and IEEE802.3x full-duplex
pause-frame ow control

• Supports up to 1536 bytes packet size

• 802.1Q VLAN tag transparent

Installation & Diagnostics

• Plug-and-play installation

• Compact size

• Supports 50 or 75 ohm coax

• Extensive LED indicators for network diagnostics

Rack Mountable

• Compatible with MCR-R15 rack chassis

• Easy Plug and Play installation

Warranty

• 3-year warranty

utcfireandsecurity.com

interlogix.com

North America

1.02 in.

(26 mm)

OFF

ON

Mode ChannelRate Limit SNR

3.82 in.
(97mm)

1.02 in.

(26 mm)

OFF

ON

Mode ChannelRate Limit SNR

MCR200-1T/1CX

T 855-286-8889

Ethernet Over Coax Media Converter

Ethernet Description

Data Rate

Connector

Cable

Coax (VDSL2)

VDSL2 Transmission Mode

VDSL-DMT Encoding

Connector

Cable

VDSL2 Distance> Data Rate*

LED Indicators

Power

10/100 Base-TX Port

VDSL2 (Coax) Port

Electrical & Mechanical

Power

Enclosure

Dimensions (H x W x D)

Weight

Environmental

Operating Temperature

Storage Temperature

Relative Humidity

* The actual data rate will vary based on the quality of the coaxial cable and environmental factors.
See instruction manual for a complete listing of data rates at various coax transmission distances.

10/100Base-TX with Auto-negotiate and Auto-MDI/MDI-X

RJ-45

10Base-T (Cat 3, 4, 5) / 100Base-T (Cat 5e) — 328 ft. (100m)

CO/CPE Mode; Channel; Rate Limit; SNR

ITU-T G.993.1 VDSL; ITU-T G.997.1;
ITU-T G.993.2 VDSL2 (Prole 17a support)

BNC female

50 or 75 ohm coax

(Down stream/Up stream)
Asymmetric

1300 ft. (400m) - 100/64Mbps 1300 ft. (400m) - 100/100Mbps
3200 ft. (1000m) - 94/44Mbps 3200 ft. (1000m) - 69/66Mbps
5900 ft. (1800m) - 60/14Mbps 5900 ft. (1800m) - 40/29Mbps
9800 ft. (3000m) - 25/5 Mbps 9800 ft. (3000m) - 17/13Mbps

On - Green

LNK/ACT; 100Mbps - Green

LNK/ACT; CO Mode; CPE Mode - Green

5V @ 2A

Metal

3.82 x 2.76 x 1.02 in. (9.7 x 7.0 x 2.6 cm)

0.44 lbs/200g

0° ~ 50°C

-20° ~ 70°C

0% ~ 90% (non-condensing)

Asia

T 852-2907-8108

(Down stream/Up stream)
Symmetric

Australia

T 61-3-9239-1200

Dimensional DiagramsSpecifications

2.76 in.

(70 mm)

1.02 in.

(26 mm)

Agency Compliances

• FCC

• CE

Europe

T 32-2-725-11-20

3.82 in.
(97mm)

Latin America

T 561-998-6114

OFF

ON

Mode ChannelRate Limit SNR

1.02 in.

(26 mm)

Ordering Information

MCR200-IT/ICX

Note: External power supply must be purchased separately. Must be in pairs. Not compatible with the MCE-COAX.

Ethernet over Coax (VDSL2)

Accessories

PS5VDC2A-US

MCR-R15

5VDC 2A Wall Mounted Power Supply

Media Converter Rack w/Power Supply

Typical Application

IP Camera

MCR200-1T/1CX MCR200-1T/1CX

Cat 5e Cable

100m (328 ft.) Max.

Alternate Application*

Network Switch

IP Cameras IP IntercomIP Access

Up to 1.8 miles (3km)

Coax

*Total amount of IP devices depends

on total data bandwidth required.

100m (328 ft.) Max.

Cat 5e Cable

Network Switch

interlogix.com

utcfireandsecurity.com

Specications subje ct to chan ge without notic e.

© 2012 Interlogix, A UTC Fire & Se curit y Company

All rig hts reserved.

201-3487 2012/01 (68666A)