Interlogix MC352-1P-1S-R, MC352-1P-1S Specsheet

IFS Line / Network Transmission
MC 352-1P/1S MC 355-1T/1S
Gigabit Ethernet to SFP Industrial Media Converter
Overview
These IFS Gigabit Ethernet to SFP Industrial Media Converters are designed for the most demanding IP network applications offering the flexibility of SFP technology and wide operating temperature range. The MC352-1P/1S model provides full IEEE802.3-at (30w) PoE and serves as a PSE device.
SFP Technology
These models convert 10/100/1000Base-T Ethernet on copper to 1000Base-X fiber via Small Form-factor Pluggable (SFP) technology. These media converters can be custom configured to your exact system design specifications by utilizing a variety of IFS SFP Mini-GBIC modules. IFS SFP Mini-GBIC modules are available in a variety of versions from multi-mode or single mode fiber, 1 or 2 fibers and wide-temperature versions.
Enhanced Remote Management Features (MC355-1T/1S only)
For efficient management, the IFS MC355-1T/1S model supports Simple Network Management Protocol (SNMP) and can be remotely managed via any standards-based management software.
Management functions include IP address configuration, DHCP Client function, port configuration, converter configuration, 802.1Q VLAN tagging, Q-in-Q VLAN, Ingress/Egress bandwidth control, QoS and Layer protocol filter, and broadcast storm control, to enhance bandwidth utilization.
In addition, the TS-1000/802.3ah OAM (operations, administration, and maintenance) protocol is supported which allows management and monitoring of a remote device via the MC355-1T/1S media converter.
Standard Feat u r eS
Ethernet
• 10/100/1000 Base-T
• Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Auto-negotiation and MDI/MDI-X
• 10/100/1000Base-T: 2-pair Cat. 5e/6 UTP cable, up to 100 meters
MC 352-1P/1S
PoE+ Support
SFP (Mini-GBIC) Port
• IEEE 802.3z 1000Base-SX/LX/BX standard
• Optionally supports 100Base-FX (MC352-1P/1S only)
• 1 SFP slot provides custom conguration
• Optical ber and distance varies by SFP (ordered separately)
Power over Ethernet (MC352-1P/1S only)
• Complies with IEEE 802.3at
• Inserts 52VDC (30w) power on Category network cable
• Protects non-PoE devices if accidentally connected
• Backwards compatible with IEEE802.3af
Installation & Diagnostics
• Plug-n-play installation
• LED indicators for easy local network diagnostics
• Firmware upgradable via remote Web interface
• Reset button at the front panel for resetting to factory default
Robust Hardened Design
• Slim IP30 metal enclosure
• DIN-rail or wall-mounting
• 24 ~ 48VDC or 24VAC Operation (MC352-1P/1S)
• 12 ~ 48VDC Operation (MC355-1T/1S)
• Redundant power with reverse-polarity protection
• Alarm relay output for port breakdown and power-failure alert
• Voltage/surge-suppression
- EFT 6000VDC protection for power lines
- ESD 6000VDC protection for Ethernet
• Complies with IEC60068-2-xx standards for free-fall,
shock and vibration
• Wide operating temperature range of up to -40ºC ~ +75ºC
Warranty
• 3-year warranty
MC 355 -1T/ 1S Non-PoE
interlogix.com
Specifications
Ethernet MC352-1P/1S MC355-1T/1S
Data Rate 10/100/1000Base-TX port Throughput (packet per second) 1,488,000pps Switch Architecture Store-and-forward Jumbo Packet Size 9K Flow Control Back Pressure for Half Duplex, Mode Pause for Full-Duplex Mode IEEE 802.3x Connector RJ-45 (Auto-MDI/MDI-X) Electro Static Discharge
(ESD) Protection
Cable Type and Distance
Fiber
Data Rate 1000Base-SX/LX/BX 100Base-FX and 1000Base-SX/LX/BX Connector SFP (Mini-GBIC) port Fiber Type and Distance Varies by SFP module
Power over Ethernet (PoE) Injector (MC352-1P/1S Only)
PoE Standard IEEE 802.3af / 802.3at High Power over Ethernet / PSE Power PIN Assignment End-Span, (+) Pins 1 & 2; (–) Pins 3 & 6
Power Output (Max. 1 PoE Device) 52VDC 15.4 Watts or 52VDC 30 Watts
LED Indicators & Controls
Power/Status Green/On – power Power Fault Proper Operation – Off; Fault – Green
10/100/1000Base-TX port Green/On – active port (TX/RX)
SFP (Mini-GBIC) port link Green/On – link established
Reset button Reset to factory default settings
Electrical & Mechanical
Power (Redundant with reverse polarity protect function)
Electrical Fast Transient (EFT) Protection
Alarm
Power and Alarm Fault Connector
Enclosure IP30 rated metal enclosure
Dimensions (H x W x D) 1.25 x 5.32 x 3.43 in. (32 x 135 x 87mm)
Weight 1.2 lbs. / 500 grams 0.93 lbs. / 423 grams
Environmental
Operating Temperature -40°C ~ +75°C -30°C ~ +75°C
Storage Temperature -40°C ~ +85°C
Relative Humidity 0% ~ 90% (non-condensing)
MTBF > 50,000 hrs @ 25°C
Standards Compliance
IEEE
EMI
EMS
Stability
6KVDC
10Base-T: 2-pair UTP Cat. 3,4,5, up to 100m (328 ft.) 100Base-TX: 2-pair UTP Cat. 5e, up to 100m (328 ft.) 1000Base-T: 4-pair UTP Cat. 5e, 6 up to 100m (328 ft.)
Green/On – active port (TX/RX); Amber/On – PoE in-use
24 ~ 48VDC or 24VAC, 1.4A (33watts) 12 ~ 48VDC, .65A (7.9 watts)
6KVDC
Provides one relay output for power failure notification Alarm relay maximum current: 1A @ 24VDC
6-pin removable screw terminal
IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX /100Base-FX IEEE 802.3ab 1000Base-TX IEEE 802.3z 1000Base-SX/LX/BX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af Power over Ethernet IEEE 802.3at High Power over Ethernet
EN 55022 CLASS A EN61000-3-2:2006 EN61000-3-3: 1995+1A:2001+A2:2005
EN 55024:1998+A1:2001+A2:2003 IEC 61000-4-2:2001 IEC 61000-4-3:2008 IEC 61000-4-4:2004 IEC 61000-4-5:2005 IEC 61000-4-6:2008 IEC 61000-4-8:2001
IEC60068-2-32(Free fall) IEC60068-2-27(Shock) IEC60068-2-6(Vibration)
IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX /100Base-FX IEEE 802.3ab 1000Base-TX IEEE 802.3z 1000Base-SX/LX/BX IEEE 802.3Q VLAN Tagging IEEE 802.3x Flow Control and Back Pressure IEEE 802.3p Class of Service IEEE 802.3ah OAM
Dimensional Diagrams
15.20
MC355-1T/1S Mounting Kit
30.00
87.80
MC355-1T/1S
9.20
(135mm)
5.32 in.
15.00
1.1 in.
(28mm)
.71 in.
(18mm)
48.80
2.00
39.7046.50
(28mm)
(40mm)
1.1 in.
1.57 in.
MC352-1P/1S
30.00
87.80
1.25 in.
(32mm)
15.20
9.20
(135mm)
5.32 in.
3.43 in.
(87.80mm)
DIN-Rail Kit
97.10
(48.80mm)
1.92 in.
15.00
1.1 in.
(28mm)
2.00
48.80
Mounting Kit
39.7046.50
MC352-1P/1S
1.25 in.
(32mm)
3.43 in.
(87.80mm)
97.10
MC352-1P/1S MC355-1T/1S
Gigabit Ethernet to SFP Industrial Media Converter
Ordering Information
North America
T 855-286-8889
Asia
T 852-2907-8108
Australia
T 61-3-9239-1200
Europe
T 32-2-725-11-20
Latin America
T 561-998-6114
MC352-1P/1S
MC355-1T/1S
Included Accessories
Note: These units require a Small Form-factor Pluggable (SFP) for operation. IFS SFPs are available for multi-mode, single mode, 1 or 2 fibers for various transmission distances over optical fiber. Please refer to the IFS SFP data sheet to select the appropriate SFP for your particular application needs. MC352-1P/1S and MC355-1T/1S use Gigabit SFPs for best performance. MC352-1P/1S can optionally use Fast Ethernet SFPs.
Note: External power supply must be ordered separately.
Gigabit Ethernet/PoE-at to SFP Industrial Media Converter
Gigabit Ethernet to SFP Industrial Managed Media Converter
User’s Manual, DIN Rail Kit, Wall Mount Kit
Accessories
SFP
SFP
SFP
SFP
PS12VDC1.5A-U
HLG-240-48
PS48VDC100W-DIN
Typical Application
S30 Series
S35 Series (wide-temp)
S20 Series optional for MC352-1P/1S only
S25 Series (wide-temp) optional for MC352-1P/1S only
12VDC@1.5A External Power Supply (for use with MC355-1T/1S only)
48VDC High Temperature Industrial Power Supply
48VDC@2A (100W) DIN-Rail Mount Hardened Power Supply (100~240VAC)
Up to 70km
Distance dependent upon SFP and fiber type
IP Camera
Optical Fiber
Cat 5e Cable Cat 5e Cable
MC35X Series
100m (328 ft) Max. 100m (328 ft) Max.
MC35X Series
Specifications subject to change without notice.
Network Switch
interlogix.com
© 2012 Interlogix.
All rights reserved.
210-3568 2012/10 (71654E)
Loading...