Interlogix MC252-1T-1CXP-R Specsheet
Network
Power over Coax - PoE-at Media Converter - Switch End
Dati tecnici
Ethernet Description
Data Rate10/100Base-TX with Auto-negotiate and Auto-MDI/MDI-X
ConnectorRJ-45
Cable10Base-T (Cat 3, 4, 5) / 100Base-T (Cat 5) 328 ft.
Coax (VDSL2)
VDSL2 Transmission ModeCO/CPE Mode; Channel; Rate Limit; SNR
VDSL-DMT EncodingITU-T G.993.1 VDSL; ITU-T G.997.1;ITU-T G.993.2 VDSL2
ConnectorBNC female
Cable50 or 75 ohm coax
VDSL2 Distance> Data Rate*
Asymmetric Mode (Down/Up)6,56 ft. (200m) - 100/60Mbps
Symmetric Mode (Down/Up)6,56 ft. (200m) - 90/100Mbps
Power Over Ethernet
PoE StandardIEEE 802.3at Type 2, IEEE802.3af
PSE InterfaceRJ-45, 44~56V DC, 600mA max., End-Span, Pin 1/2(+),
PD InterfaceBNC, Input Range: 44~57V DC, 24V DC, 1A max.
Max. PoE Budget via PoE+25 watts @ BNC
Max. PoE Budget via PSU30 watts @ BNC
Max. MC252-1P-1CX power output
(PSU/PoE+)
656 ft. (200m)20W / 13W
1,312 ft. (400m)16W / 11W
1,968 ft. (600m)12W / 10W
2,625 ft. (800m)7W / 6W
3,281 ft. (1000m)5W / 4W
3,937 ft. (1200m) /
LED Indicators
PowerOn - Green
10/100 Base-TX Port LNK/ACT; 100Mbps - Green
VDSL2 (Coax) PortLNK/ACT; CO Mode; CPE Mode - Green
PoE InGreen
Electrical & Mechanical
Power52 ~ 56VDC or PoE+ In
EnclosureMetal
Dimensions (H x W x D)3.7 x 2.76 x 1.54 in. (94 x 70.3 x 39.2 mm)
Weight0.66 lbs/302g
Environmental
Operating Temperature-40° ~ 75°C
Storage Temperature-40° ~ 75°C
Relative Humidity0% ~ 95% (non-condensing)
MC252-1T-1CXP
(100m)
(Profile 17a support)
1,312 ft. (400m) - 95/55Mbps
1,968 ft. (600m) - 90/50Mbps
2,625 ft. (800m) - 85/45Mbps
3,281 ft. (1000m) - 70/35Mbps
3,937 ft. (1200m) - 60/25Mbps
1,312 ft. (400m) - 85/100Mbps
1,968 ft. (600m) - 70/80Mbps
2,625 ft. (800m) - 65/70Mbps
3,281 ft. (1000m) - 70/55Mbps
3,937 ft. (1200m) - 45/40Mbps
E
3/6(-)
Cost-effective VDSL2 CO/CPE bridge solution
E
CO/CPE selectable via DIP-switch
E
Selectable target data rate and target SNR margin
E
10/100Mbps Ethernet
E
Half-duplex back pressure and IEEE802.3x full-duplex
E
Supports up to 1536 bytes packet size
E
802.1Q VLAN tag transparent
E
Complies with IEEE 802.3at
E
Backwards compatible with IEEE802.3af
E
Protects non-PoE devices if accidentally connected
Flexible power source either external DC or PoE power
E
input
E
Plug-and-play installation
E
Supports 50 or 75 ohm coax
E
Extensive LED indicators for network diagnostics
E
IP30 metal enclosure
E
Wall-mountable
Complies with IEC60068-2-xx standards for free-fall,
E
shock and vibration
Wide operating temperature range of up to -40ºC ~
E
+75ºC
E
3-year warranty
Come ordinare
MC252-1T-1CXP
WEBIPS-IT-MC252-1T-1CXP-2014-02-28 13:13:30 www.utcfssecurityproducts.it
Power over Coax - PoE-at Media Converter - Switch End
Loading...