Interlogix KTD-83 Specsheet
e
GE Security Product Data Sheet
www.GESecurity.com
KTD-83
Data Signal Distributor
Overview
The KTD-83 is a data signal distributor designed for use in a
Digiplex® system. It is used when an RS422 control signal must be
dispersed along separate lines of two-conductor, twisted-pair cable.
One signal input can be distributed among up to six outputs. The
KTD-83 can also be used to reamplify RS422 control signals that must
travel excessive distances between the controller and receiver.
Outstanding Features
Cable connections are made on a removable, 14-position terminal
strip. It is powered from a 12 VDC source. The KTD-83 is constructed
of aluminum. It features a black anodized finish.
Standard Features
l
Distributes an RS422 control signal
l
1 input x 6 outputs
l
Reamplifies signal on outputs 2 through 6
l
Powered from a 12 VDC source
l
Removable terminal strip for cable connections
l
Compact design
KTD-83
Data Signal Distributor
Specifications
Electrical
l
Input voltage: 12 VDC
l
Input power: 6 VA
l
Input data signal: RS422
l
Output 1: RS422 (Not amplified)
l
Outputs 2 to 6: RS422 (Amplified to original level)
Connections
l
14-position removable terminal strip
Mechanical
l
Weight: 8 oz (227 g)
l
Material: 0.050 in (1.27 mm) aluminum
l
Finish: Black anodized
Related Diagram Ordering Information
GE Security
g
www.GESecurity.com
Mailing Address
4575 Research Way, STE 250
Corvallis, OR 97333 USA
www.GESecurity.com
Americas
800-469-1676 (US only)
tel 541-754-9133
fax 541-754-7162
Asia
tel 852-2907-8108
fax 852-2142-5063
Australia
tel 61-3-9259-4700
fax 61-3-9259-4799
Europe
tel 32-2-725-11-20
fax 32-2-721-86-13
Latin America
tel 305-267-4301
fax 305-267-4300
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GE Security online at www.GESecurity.com or contact your GE Security sales representative.
IPS-KTD-83-2004-06-15 02:08:20 [NOT RELEASED]
Loading...