GE
Lifestyle Devices
Security
Lighting and Appliance Control
Z-Wave® Control Network
Introducing the next-generation
wireless solution to integrate
home electronics and systems
Overview
The Z-Wave® wireless networking platform provides convenience and flexibility to homeowners through
a broad array of Lighting and Appliance components. Compatible with the innovative Simon XT
Concord 4 (v4.5 and higher) full-featured home security systems, Z-Wave modules easily unify home
electronics into an integrated wireless network without complicated programming or wiring.
Z-Wave’s modular design enables devices to be easily added to a home network and can communicate
wirelessly with other Z-Wave modules and remote controllers. The Auto-Sensing feature automatically
turns on lights, and blue LED enhances visibility allowing users to quickly identify system status. Z-Wave
allows homeowners to centrally control various devices as well as command lighting and appliances
from a Web-based PC or cell phone.
™
and
Z-Wave® In-Wall
On/Off Switch
Z-Wave
In-Wall Dimmer
• Device can be turned on or off manually or via convenient
Z-Wave remote control
• Blue LED indicates switch location for easy viewing in
the dark
• Can be included in multiple groups and scenes
• Supports Advanced Conguration, LED status and
invert switch
• Screw terminal installation with wiring connections for
Line (Hot), Load, Neutral and Ground
• Uses standard-size wall plate for single gang installations
• White nish complements almost any décor
• Device can be turned on or off manually or via convenient
Z-Wave remote control
• Brightness level can be controlled manually or with
Z-Wave remote control
• Blue LED indicates switch location for easy viewing in the dark
• Can be included in multiple groups and scenes
• Supports Advanced Conguration, including dim rates,
LED status and invert switch
• Two-wire installation, no connection to Neutral required
• Uses mid-size wall plate for single gang installations
Power
Signal (Frequency)
Load ratings
Range
Operating Temp.
Range
For indoor use only.
Power
Signal (Frequency)
Minimum Load
Maximum Load
Range
Operating Temp.
Range
For indoor use only.
120VAC, 60Hz
908.42 MHz
Incandescent -
Minimum Load: 40W,
Maximum Load: 600W
Motor – 1/2HP
Resistive – 1800W
Up to 100 feet line
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
32–104° F (0–40° C)
120VAC, 60Hz
908.42 MHz
40W, incandescent
lamps only
500W, incandescent
lamps only
Up to 100 feet line
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
32–104° F (0–40° C)
Z-Wave Wall
Receptacle
• One Z-Wave remote-controlled AC outlet
• Remote ON/OFF control via the Z-Wave controller/network
• Manual ON/OFF control with the pushbutton
• Auto-Sensing* automatically turns light ON
• One always-ON pass-through AC outlet
• Blue LED indicates ON/OFF status (supports advanced
conguration for status)
• Z-Wave certied
* This feature is disabled by default. The Auto-Sensing feature must be enabled using
the LCD Remote Control (IS-ZW-RC-1)
Power
Signal (Frequency)
Maximum Load
for the Z-Wave
Controlled Outlet
Maximum Load
for Both Outlets
Range
Operating Temp.
Range
For indoor use only.
120VAC, 60Hz
908.42 MHz
600W Incandescent,
½ HP Motor or
1800W (15A) Resistive
1800W Resistive
Up to 100 feet line
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
32–104° F (0–40° C)
Z-Wave
Outdoor Module
• One Z-Wave remote-controlled AC outlet
• Remote ON/OFF control via the Z-Wave controller
• Manual ON/OFF control with the pushbutton
• Auto-Sensing* automatically turns light on
• Weather- and impact-resistant housing for use outdoors
in damp or wet conditions
• Integrated outlet cover keeps dirt and debris out when the
module is not in use
• Z-Wave certied
Power
Signal (Frequency)
Maximum Load
for the Z-Wave
Controlled Outlet
Range
Operating Temp.
Range
For outdoor use in dry, damp or wet locations.
120VAC, 60Hz
908.42 MHz
600W Incandescent,
½ HP Motor or
1800W (15A) Resistive
Up to 100 feet line
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
14–140° F (-10–60° C)
Z-Wave Plug-In
Fluorescent Light
and Appliance
Module
Z-Wave Plug-In
Lamp Module
(Dimmer)
• One Z-Wave-controlled AC outlet
• Remote ON/OFF control via the Z-Wave controller
• Manual ON/OFF control with the front panel pushbutton
• Auto-Sensing* automatically turns light on
• One always-ON pass-through AC outlet
• Space-efcient design does not block the lower outlet
when plugged in to the upper outlet
• Plugs and cords route to the side allowing close placement
of furniture
• Z-Wave certied
• One Z-Wave-controlled AC outlet for standard
incandescent lighting
• Remote ON/OFF and brightness control via Z-Wave
controller
• Manual ON/OFF and brightness control with front
panel pushbutton
• Auto-Sensing* automatically turns light on
• One always-ON pass-through AC outlet
• Space-efcient design does not block the lower outlet when
plugged in to the upper outlet
• Plugs and cords route to the side allowing close placement
of furniture
• Adjustable dim rates
• Z-Wave certied
Power
Signal (Frequency)
Maximum Load
for the Z-Wave
Controlled Outlet
Maximum Load
for Both Outlets
15 Amps
Range
Operating Temp.
Range
For indoor use only.
Power
Signal (Frequency)
Maximum Load
for the Z-Wave
Controlled Outlet
Maximum Load
for Pass-Through
Outlet
Maximum Load
for Both Outlets
15 Amps
Z-Wave controlled outlet is fused @ 5A.
This fuse is not user serviceable.
Range
Operating Temp.
For indoor use only.
120VAC, 60Hz
908.42 MHz
600W Incandescent,
½ HP Motor or
1800W Resistive
1800W Resistive
Up to 100 feet line
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
32–104° F (0–40° C)
120VAC, 60Hz
908.42 MHz
300W Incandescent
1500W
1800W Resistive
Up to 100 feet line
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
32–104° F (0–40° C)
Z-Wave LCD
Remote Control
• Controls the entire Z-Wave lighting control network
• Up to 232 Z-Wave devices in the network
• Create up to nine timed events for automatic activation
• Access and change advanced parameters (dim rates,
LED status, etc.) of Z-Wave devices
• Controls a Z-Wave-certied HVAC thermostat
• Works with any Z-Wave-certied lighting device,
regardless of brand
• Turns all lights ON or OFF with one button
• Z-Wave certied
• Can be used as a primary or secondary
controller
Frequency Range
Battery
908.42 frequency range
for North America
Requires three “AAA”
alkaline batteries, not
included
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T 32-2-725-11-20
F 32-2-721-40-47
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com
Specifications subject to
change without notice
© 2010 General Electric Company
All Rights Reserved
Ordering Information
In-Wall On/Off Switch
IS-ZW-WS-1 Z-Wave
In-Wall Dimmer
IS-ZW-DS-1 Z-Wave In-Wall Dimmer, 120VAC, 60Hz, 908.42 MHz
Plug-In Lamp Module
IS-ZW-LM-1 Z-Wave Plug-In Lamp Module, Dimmer, 120VAC, 60Hz, 908.42 MHz
Plug-In Fluorescent Light & Appliance Module
IS-ZW-AM-1 Z-Wave Plug-In Fluorescent Light & Appliance Module, 120VAC, 60Hz, 908.42 MHz
Outdoor Module
IS-ZW-OM-1 Z-Wave Outdoor Module, 120VAC, 60Hz, 908.42 MHz
Wall Receptacle
IS-ZW-WR-1 Z-Wave Wall Receptacle, 120VAC, 60Hz, 908.42 MHz
LCD Remote Control
IS-ZW-RC-1
®
ON-OFF Switch, 120VAC, 60Hz, 908.42 MHz
Z-Wave LCD Remote, 908.42 MHz (North America),
Requires three “AAA” batteries (not included)
Z-Wave® is a registered US trademark of Zensys A/S.
Complies with FCC and Industry Canada regulations.
002-3272 2010/03 (60473)
Loading...