Introducing the next-generation
wireless solution to integrate home
electronics and systems
Overview
Z-Wave LCD
Remote Control
• Controls the entire Z-Wave
lighting control network
• Up to 232 Z-Wave devices in the
network
• Create up to nine timed events
for automatic activation
• Access and change advanced
parameters (dim rates,
LED status, etc.) of Z-Wave
devices
• Controls a Z-Wave-certifi ed
HVAC thermostat
• Works with any Z-Wave-certifi ed
lighting device, regardless of
brand
The Z-Wave® wireless networking platform provides
convenience and fl exibility to homeowners through
a broad array of Lighting and Appliance components.
Compatible with Simon XT
®
/XTi, Concord® 4 and NetworX
full-featured home security systems, Z-Wave modules easily
unify home electronics into an integrated wireless network
without complicated programming or wiring.
Z-Wave’s modular design enables devices to be easily
added to a home network and can communicate wirelessly
with other Z-Wave modules and remote controllers. The
Auto-Sensing feature automatically turns on lights, and blue
LED enhances visibility allowing users to quickly identify
system status. Z-Wave allows homeowners to centrally
control various devices as well as command lighting and
appliances from a Web-based PC or cell phone.
• Turns all lights on or off with
one button
• Z-Wave certifi ed
• Can be used as a primary or
secondary controller
Frequency
Range
Battery
908.42 frequency range for
North America
Requires three “AAA”
alkaline batteries, not
included
Z-Wave In - W al l
On/Off Switch
Z-Wav e
In-Wall Dimmer
Z-Wave Wall
Receptacle
• Device can be turned on or off
manually or via convenient Z-Wave®
remote control
• Blue LED indicates switch location
for easy viewing in the dark
• Can be included in multiple groups
and scenes
• Supports Advanced Confi guration,
LED status and invert switch
• Screw terminal installation with wiring
connections for Line (Hot), Load,
Neutral and Ground
• Uses standard-size wall plate for
single gang installations
• White fi nish complements almost
any décor
Power120VAC, 60Hz
Signal
(Frequency)
Load ratingsIncandescent -
RangeUp to 100 feet line
Operating
Temp. Range
For indoor use only.
908.42 MHz
Minimum Load: 40W,
Maximum Load: 600W
Motor – 1/2HP
Resistive – 1800W
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
32°F~104°F (0°C~40°C)
• Device can be turned on or off
manually or via convenient Z-Wave
remote control
• Brightness level can be controlled
manually or with Z-Wave remote
control
• Blue LED indicates switch location
for easy viewing in the dark
• Can be included in multiple groups
and scenes
• Supports Advanced Confi guration,
including dim rates, LED status and
invert switch
• Two-wire installation, no connection
to Neutral required
• Uses mid-size wall plate for single
gang installations
Power120VAC, 60Hz
Signal
(Frequency)
Minimum Load40W, incandescent lamps
Maximum Load500W, incandescent lamps
RangeUp to 100 feet line
Operating
Temp. Range
For indoor use only.
908.42 MHz
only
only
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
32°F~104°F (0°C~40°C)
• One Z-Wave remote-controlled
AC outlet
• Remote ON/OFF control via the
Z-Wa ve contr o l l er/ n etwork
• Manual ON/OFF control with the
pushbutton
• Auto-Sensing* automatically turns
light ON
• One always-ON pass-through AC
outlet
• Blue LED indicates ON/OFF status
(supports advanced confi guration
for status)
• Z-Wave certifi ed
Power120VAC, 60Hz
Signal
(Frequency)
Maximum Load
for the Z-Wave
Controlled
Outlet
Maximum Load
for Both Outlets
RangeUp to 100 feet line
Operating
Temp. Range
For indoor use only.
908.42 MHz
600W Incandescent,
½ HP Motor or
1800W (15A) Resistive
1800W Resistive
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
32°F~104°F (0°C~40°C)
Z-Wav e
Outdoor
Module
Z-Wave Pl u g - In
Fluorescent Light
and Appliance
Module
Z-Wave Pl u g - In
Lamp Module
(Dimmer)
• One Z-Wave® remote-controlled
AC outlet
• Remote ON/OFF control via the
Z-Wa ve contr o l l er
• Manual ON/OFF control with the
pushbutton
• Auto-Sensing* automatically turns
light on
• Weather- and impact-resistant
housing for use outdoors in damp
or wet conditions
• Integrated outlet cover keeps dirt
and debris out when the module
is not in use
• Z-Wave certifi ed
Power120VAC, 60Hz
Signal
(Frequency)
Maximum Load
for the Z-Wave
Controlled
Outlet
RangeUp to 100 feet line
Operating
Temp. Range
For outdoor use in dry, damp or wet locations.
908.42 MHz
600W Incandescent,
½ HP Motor or
1800W (15A) Resistive
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
14°F~140°F (-10°C~60°C)
• One Z-Wave-controlled AC outlet
• Remote ON/OFF control via the
Z-Wa ve contr o l l er
• Manual ON/OFF control with the
front panel pushbutton
• Auto-Sensing* automatically turns
light on
• One always-ON pass-through
AC outlet
• Space-effi cient design does not
block the lower outlet when plugged
in to the upper outlet
• Plugs and cords route to the side
allowing close placement of furniture
• Z-Wave certifi ed
Power120VAC, 60Hz
Signal
(Frequency)
Maximum Load
for the Z-Wave
Controlled
Outlet
Maximum Load
for Both Outlets
15 Amps
RangeUp to 100 feet line
Operating
Temp. Range
For indoor use only.
908.42 MHz
600W Incandescent,
½ HP Motor or
1800W Resistive
1800W Resistive
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
32°F~104°F (0°C~40°C)
• One Z-Wave-controlled AC outlet for
standard incandescent lighting
• Remote ON/OFF and brightness
control via Z-Wave controller
• Manual ON/OFF and brightness
control with front panel pushbutton
• Auto-Sensing* automatically turns
light on
• One always-ON pass-through AC outlet
• Space-effi cient design does not block
the lower outlet when plugged in to
the upper outlet
• Plugs and cords route to the side
allowing close placement of furniture
• Adjustable dim rates
• Z-Wave certifi ed
Power120VAC, 60Hz
Signal
(Frequency)
Maximum Load
for the Z-Wave
Controlled
Outlet
Maximum
Load for PassThrough Outlet
Maximum Load
for Both Outlets
15 Amps
Z-Wave controlled outlet is fused @ 5A.
This fuse is not user serviceable.
RangeUp to 100 feet line
Operating
Temp.
For indoor use only.
908.42 MHz
300W Incandescent
1500W
1800W Resistive
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
32°F~104°F (0°C~40°C)
* This feature is disabled by default. The Auto-Sensing feature must be enabled using the LCD Remote Control (IS-ZW-RC-1).
Z-Wav e
Advanced
Wireless
Thermostat
Z-Wave Ya le
and Kwikset
Door Locks
• Large, easy-to-read touch screen display
• Two-way communication as part of a
Z- Wa v e® network, allowing the thermostat
to be controlled locally and remotely
• Save Energy button can predetermine
set-back temperature
• 7-day programming for stand alone use*
• Easy-to-use controls make it simple to
raise/lower temperature and fan settings
• Check Filter LED signals need to
clean fi lter to improve effi ciency
and performance
• Operates on 3 “AA” batteries and or
24AC power (required for Z-Wave
operation)
• Mercury free - Environmentally safe
Remote
Capabilities
Power5V/1A, 100/240VAC
BatteryRequires three “AA” alkaline
By Z-Wave enabled radio
batteries, not included
• Interlogix intrusion systems work with
Yale and Kwikset Z-Wave enabled locks
• Available in lever and deadbolt forms
• Lock and unlock doors remotely
• Trigger “scenes” with your security
system simply by entering your lock
code
• Give temporary access to family
members, neighbors or contractors
without handing them a key
• Lock the whole house at the press of a
single button using your security system
• Use on exterior doors to secure the
perimeter of your home
• Use on interior doors to secure offi ces,
wine cellars, storage rooms and more
Remote
Capabilities
BatteryRequires four “AA” alkaline
RangeUp to 100 feet line of sight
By Z-Wave enabled radio
batteries
between the wireless
controller and the closest
Z-Wave receiver module
* Disabled with Z-Wave module and remote service programming used.