Interlogix GS614-W, GS615-W Specsheet
S E N T R O L
P R O D U C T I N F O R M A T I O N B U L L E T I N
GS614/GS615
GLASSBREAK
SHOCK SENSOR
ANALYZER
For complete solution
in perimeter protection
Model numbers: GS614, GS615
GS614/615 analyzer
• Sensitivity adjustment and
pulse count selection
• Up to 20 sensors can be
connected to each analyzer
• On board voltage regulation
• LED display
The Sentrol GS614 and GS615 Shock Sensor
Analyzers work in conjunction with the inertia shock
sensors GS600, GS610, & GS611. The analyzer is
designed to interface between the shock sensor
loop and the burglar control panel.
Models GS614 and GS615 provide sensitivity
adjustment for the single shock gross attack level
and a pulse count feature which detects small
shocks and counts them at one second intervals,
storing them in digital memory for 30 seconds. This
provides a second level of signal processing to
eliminate false alarms and increase detection of
repeated tampering attacks.
continued
Sentrol GS614 & GS615 Analyzer
Specifications:
Electrical
Operating Voltage ................................................ 10 –15 VDC
Current Draw .................................... 50 mA max, 10 mA min
Maximum loop rating ........................................ 1 A –12 VDC
Loop Configuration ............................................. closed loop
Environmental
Operating Temperature ........... 14°F (–10°C) to +140°F (60°C)
Relative Humidity............................................................ 90%
Features
Sensitivity Setting ................................... Potentiometer, adj.
Pulse Count Options ............................ GS614 (4), GS615 (9)
Mounting Method .................................... Double-sided tape
Mounting Location .................. Control panel recommended
GS614 Analyzer GS615 Analyzer
1.77"
Sensitivity
adjustment
4.50 cm
Sensitivity
adjustment
Pulse
counter
3.42"
8.7 cm
+
–
Sensor
Relay
Loop
2.5"
6.35 cm
+
–
Sensor
Loop
Pulse
counter
3.5"
8.89 cm
RelayReset
Ordering Information
Description Model Number
GS614-W Single zone analyzer
GS615-W Single zone analyzer with EOL resistor and manual reset
12345 SW Leveton Dr. Tualatin, OR 97062
PH
503.692.4052 FX 503.691.7566 www.interlogixinc.com
USA & Canada:
Technical Service:
FaxBack:
800.547.2556
800.648.7424
800.483.2495
Interlogix reserves the right to change specifications without notice.
©2001 Interlogix, Inc.
ShatterPro and ShatterPoint are trademarks of Interlogix, Inc.
G-4206- FLG5K-0201
Loading...