Interlogix GE-DSH-82-POE-R, GE-DSH-82-POE, GE-DSH-82, GE-DSH-73-R, GE-DSH-73 Specsheet

Network Transmission Products

Industrial Managed Ethernet Switch

Overview

The IFS Transmission Industrial Managed Switch Series with multiple redundant ring technology is equipped with eight 10/100Mbps Fast Ethernet ports and two gigabit TP/SFP combo interfaces, and the GE- DSH-73 is equipped with seven 10/100 MpS Fast Ethernet ports and three gigabit TP/SFP combo interfaces. It is a industrial, fully managed Ethernet Switch specifically designed to operate reliably in electrically harsh and climatically demanding environments. The GE-DSH-82/GE- DSH-73 Series is the most dependable choice for highly managed and Fiber Ethernet application.

• Wide-rangeoperating		•	Gigabit/fiberuplinkcapability
	temperature	•	IndustrialFailSafeRing:fast
•	RedundantEthernetnetwork		recovery to a redundant
•	Manageable		Ethernet network
•	Powerredundant

The GE-DSH-82/GE-DSH-73 Series features strong and rapid selfrecovery capability to prevent interruptions and outside intrusions. It incorporates advanced redundant data ring technology, rapid spanning protocol (IEEE 802.1w RSTP) and redundant power supply system into any industrial automation network to enhance system reliability and uptime in harsh factory environments. It also protects industrial network connectivity with switching recovery capability. This capability is used for implementing fault-tolerant ring and mesh network architectures. If the industrial network is interrupted accidentally, the fault recovery times can be less than 20ms. This fast recovery time quickly brings the network back to normal operation.

With IP-30 aluminum industrial case protection, the GE-DSH-82/GE- DSH-73 Series provides a high level of immunity against electromagnetic interference and heavy electrical surges usually found on plant floors

or in curbside traffic control cabinets. The Series also provides a wide range of power supply options suitable for multiple industries and for worldwide operation. Its operating temperature range from -40 to 75 degrees C allows the managed industrial switch to be placed in almost any difficult environment. Two Gigabit ports provide drop and insert functionality with a third for uplinking.

GE-DSH-82/

GE-DSH-73 Series

Industrial Managed

Ethernet Switch

The GE-DSH-82/GE-DSH-73 Series supports robust advanced features including IEEE 802.1Q VLAN, GVRP, port link aggregation, QoS, broadcast storm control and MAC address filtering. It also includes IGMP snooping enhanced security with IGMP snooping and querying multicasting for video operations and bandwidth utilization to fit a variety of applications. Via aggregation of supporting ports, the Series allows the operation

of high-speed trunk combining multiple ports. A maximum of up to four ports can be assigned for four trunk groups and support fail-over as well. Additionally, its standard-compliant implementation ensures interoperability with equipment from other vendors.

Standard Features

•8-Port 10/100Base-TX RJ-45 (GE-DSH-82/GE-DSH-82 PoE)

•2-Port Gigabit TP/SFP combo interface, SFP (Mini-GBIC) supports 100/1000 Dual Mode (GE-DSH-82/GE-DSH-82 PoE)

•7-Port 10/100 Base RJ-45 (GE-DSH-73)

•3-Port Gigabit TP/SFP combo interface, SFP (Mini-GBIC) supports 100/1000 Dual Mode (GE-DSH-73)

•1 RJ-45 console interface for switch basic management and setup

•Relay alarm for port breakdown, power failure

•Supports 4000 VDC Ethernet ESD protection

•FCC Class A, CE compatibility

•Free-fall, shock and vibration stability

•Provides redundant backup feature and recovery time less than 20ms

•Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z gigabit Ethernet standards

•Supports auto-negotiation and half-duplex/full-duplex modes for all 10Base-T/100Base-TX and 1000Base-T ports

•Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause-frame flow control (full-duplex) groups, out of 4K VLAN IDs

•Supports spanning tree protocol

•Supports strict priority and Weighted Round Robin (WRR) policies

•Ingress/egress bandwidth control on each port

•IGMP query mode for multicast media application

•Dual power operation; External power supply and DIN rail powered

•IP address security management to prevent unauthorized intruder

•Port mirroring to monitor the incoming or outgoing traffic on a particular port

•Web-based, telnet, console command line management

•Supports LLDP to allow switch to advise its identification and capability on the LAN

8-Port 10/100mbps Plus	8-Port 10/100mbps Plus	7-Port 10/100mbps Plus
2 Gigabit SFP Combo	2 Gigabit SFP Combo	3-Port Gigabit SFP Combo
Managed Switch	Managed POE Switch	Managed Industrial Switch

GE-DSH-82/GE-DSH-73 Series Industrial Managed Ethernet Switch Comparisons

Hardware Specifications

Power over Ethernet

GE SKU

GE-DSH-82

GE-DSH-82-PoE*

GE-DSH-73

GE Description

	10/100Mbps Copper	8 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports	8 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports	7 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports
	Ports
	1000Mbps Copper	2 10/100/1000Base-T RJ-45 ports	2 10/100/1000Base-T RJ-45 ports	3 10/100/1000Base-T RJ-45 ports
	Ports
	SFP/Mini-GBIC Slots	2 SFP interfaces, shared with Port-9 and Port-10	2 SFP interfaces, shared with Port-9 and Port-10	3 SFP interfaces, shared with Port-7, Port-9 and
				Port-10
	Switch Architecture	Store-and-Forward	Store-and-Forward	Store-and-Forward
	Switch Fabric	5.6Gbps/non-blocking	5.6Gbps/non-blocking	7.4Gbps/non-blocking
	Switch Throughput	4.16Mpps @64Bytes	4.16Mpps @64Bytes	5.5Mpps @64Bytes
	Address Table	8K entries	8K entries	8K entries
	Share Data Buffer	1Mbit	1Mbit	1Mbit
	Maximum Frame Size	1522 Bytes packet	1522 Bytes packet	1522 Bytes packet
	Flow Control	Back pressure for Half-Duplex	Back pressure for Half-Duplex	Back pressure for Half-Duplex
		IEEE 802.3x Pause Frame for Full-Duplex	IEEE 802.3x Pause Frame for Full-Duplex	IEEE 802.3x Pause Frame for Full-Duplex
		Per unit: Power (Green), Ring Master (Green), Power	Per unit: Power (Green), Ring Master (Green), Power	Per unit: Power (Green), Ring Master (Green), Power
		1 (Green), Power 2 (Green), Fault (Red)	1 (Green), Power 2 (Green), Fault (Red)	1 (Green), Power 2 (Green), Fault (Red)
		8 port 10/100: Link/Activity (Green), Full-Duplex/	8 port 10/100: Link/Activity (Green), Full-Duplex/	7 port 10/100: Link/Activity (Green), Full-Duplex/
	LED	Collision (Yellow)	Collision (Yellow)	Collision (Yellow)
		2 SFP port: LNK/ACT (Green)	2 SFP port: LNK/ACT (Green)	3 SFP port: LNK/ACT (Green)
		2 1000T: LNK/ACT (Green), 1000M (Green)	2 1000T: LNK/ACT (Green), 1000M (Green)	3 1000T: LNK/ACT (Green), 1000M (Green)
			PoE: PoE In-Use (Green)
			2 Digital Input (DI):
			Level0:-30~2V
	DI/DO		Level1:10~30V
			Max.inputcurrent:8mA
			2DigitalOutput(DO):
			Open collector to 40VDC, 200mA
	ESD Protection	4KV DC	6KV DC	6KV DC
	EFT Protection	3KV DC	3KV DC	3KV DC
	Console Interface	One RJ-45-to –RS-232 male connector for switch	One RJ-45-to –RS-232 male connector for switch	One RJ-45-to –RS-232 male connector for switch
		management	management	management
	PoE Standard		IEEE 802.3af PSE (Power Sourcing Equipment)
	Units Can Be Powered		8
	PoE Power Output		48V DC, Max. 15.4 watts, 350mA
	Power Pin Assignment		1/2(+), 3/6(-)